Solar heating - Import export

Intentionally designed to be installed passively to the building’s facade, Microlouvre Koolshade® absorbs and dissipates solar heat, rather than inefficiently reflecting sunlight like many current forms of solar control. Microlouvre Koolshade® screens also provide protection and privacy from the outside whilst maintaining perfect vision out, providing 100% pure, full colour rendered (CRI) daylight for the occupants.

The LIPP® Large Thermal Storage Tank is a customized solution to effectively store excessive heat from biogas plants, biomass heating plants, solar plants or other heat sources. The carbon steel tanks are fabricated on site with the patented automated LIPP® Welding Technology. The horizontal welding process enables the infinitely variable production of tanks up to 6,000 m³ volume with horizontal welding only. The largevolume, above ground storage tanks are fitted with all necessary safety and operation equipment. Additional, individual components according to client’s specification can be considered. The roof and wall insulation is individually adapted to local conditions. The LIPP® Thermal Storage Tanks operate at atmospheric pressure, at a temperature of up to 95° C and are suitable for use with heating water. Speciality No additional nitrogen system necessary.

SOLUTION TO EFFECTIVELY STORE EXCESSIVE HEAT FROM BIOGAS PLANTS – FROM 2,000 TO 6,000 M³ The LIPP® Thermal Storage Tank is a customized solution to effectively store excessive heat from biogas plants, biomass heating plants, solar plants or other heat sources. The carbon steel tanks are fabricated on site with the patented automated LIPP® Welding Technology. The horizontal MAW welding process enables the infinitely variable production of tanks up to 6,000 m³ volume with horizontal welding only. The large volume, above ground storage tanks are fitted with all necessary safety and operation equipment. Additional, individual components according to client’s specification can be considered. The roof and wall insulation is individually adapted to local conditions. The LIPP® Thermal Storage Tanks operate at atmospheric pressure, at a temperature of up to 95° C and are suitable for use with heating water. No additional nitrogen system necessary.

FOR THE INTERMEDIATE STORAGE OF RENEWABLE ENERGIES – FROM 200 TO 2,000 M³ The LIPP® thermal storage tank is the tailored thermal storage solution for renewable energies with an effective volume ranging from 200 to 2,000 m3 which is suitable for individual customisation. Expedient thermal storage is a prerequisite for the effective utilisation of heat from biogas plants, biomass cogeneration plants, solar plants or other heat sources. The flexible capacity LIPP® buffer storage tank provides the ideal solution for this application. The tanks are fabricated on site using the tried and tested LIPP® Double Seam System and the stainless steel VERINOX®. Insulation can be tailored to the intended application in order to produce large volume, above ground storage tanks with an individually customised interior. The tanks are designed for non pressurised operation with an operating temperature of up to 95 °C and are suitable for use with heating water. No additional nitrogen system necessary.

770 Liter Packaging Waste ContainerMade of high density polyethylene (HDPE)The container has 4 wheels, 2 360° swivels with brakes and 2 360° swivels without brakes, with a lid and can be easily transported.UV resistant.The paint used will have high light sensitivity and will not fade/discolor in sunlight.The wheel bodies will be polypropylene and the tires on them are made of material resistant to all kinds of weather conditions.The wheel axle shaft is made of galvanized solid material.Containers will be manufactured from materials that do not smell, have easy-to-clean properties, will not be affected by solar heat, and will not contain alcohol, yeast, vinegar, salt spirit, acid, ammonia, etc. It is not affected by corrosive chemicals.The metal part on the container is galvanized.The container will be resistant to shock effects, and shock effects will not cause any deformation, change in size or other properties.The container body will be resistant to falling.

IGU is a glass unit that is produced by two or more glass panes with convenient dry air or gases inside. Heat & Solar Control IGUs are made of high-quality Solar Control Low-E Glass. By providing maximum thermal insulation and solar control, it reduces your heating costs in winter and cooling costs in summer.

In the modern architectural buildings, IGUs with temperable soft-coated Low-E products are being used which provide solar and heat control as well as safety in the facades. In those buildings, effective heat insulation in winter is provided while heating expenses are being reduced, and the solar energy transmission and cooling expenses in the summers decreases significantly. Temperable Solar Control Low-E glass provides comfortable living areas to end users with its thermal insulation and solar control property; also provides best solutions for safety requirements when it is tempered. Besides applied on clear float glass with a neutral view, temperable Solar Control Low-E coating can also be applied on body tinted glass to provide a colorful view in the facades.

Tempered glass shatters into small, blunt edged fragments when broken, so it leads to minimum risk of injury. Tempered glass is approximately 4-5 times more durable than normal glass. Please see link for Soft-Coated Solar & Heat Control Glass.

Reflective glasses are solar control glasses with reflection characteristic. Prevents solar heat transition into buildings, controls the luminosity of sunlight, keeps inside cooler and reduces energy consumption. Offers a uniform appearance between vision and spandrel areas due to its high reflectance. Creates mirror effect from brighter direction of light. For example, it provides one-way view from inside to outside during day hours and from outside to inside during night. Can be toughened, heat strengthened and bent. Lamination and enameling are also possible.

Tinted glass is manufactured by adding coloring agents to the raw batch before melting process. Advantages Offers wide options to designers and customers to create aesthetic and stylish places with its different color alternatives. If used in exterior, it limits solar heat input into the building, control the extreme brightness of the sun, offers a comfortable working and living environment. By its solar control it reduces the cooling costs.​ Supply opportunities is available in different sizes and colors. Laminated glass, toughened glass, heat strengthened glass, enameled glass, bent glass, coated glass, acid etched glass, sandblasted glass and mirror can be produced by applying secondary processes to tinted glass.

IGU is a glass unit that is produced by two or more glass panes with convenient dry air or gases inside. The classical Insulating Glass Units (IGU) provides a standard level of insulation. For IGUs with heat control you can see here For IGUs with heat and solar control you can see here

IGU is a glass unit that is produced by two or more glass panes with convenient dry air or gases inside. Heat control IGUs are made of high-quality heat control coated Low-E Glass. They provide maximum thermal insulation and reduce your heating costs. For IGUs with heat and solar control you can see here

IGU is a glass unit that is produced by two or more glass panes with convenient dry air or gases inside. Heat control IGUs are made of high-quality heat control coated Low-E Glass. They provide maximum thermal insulation and reduce your heating costs. For IGUs with heat and solar control you can see here

As KMC Group, we serve to automotive main industry, furniture, domestic appliance, steel goods, decoration, heating & cooling, air conditioning, civil works & steel construction, scaffolding profiles, heated towel rack, solar energy systems, and agricultural irrigation & greenhouse industries by specially produced profiles with MEKO Brand. We continue to our stabilized commercial life for over half century, with annually 150 thousand trade capacity of Carbon Steel, Galvanized, Hot Rolled and pre-painted on demand and following the latest technology in order to serve you better. We maintain our quality perspective by performing physical & chemical tests in our own in house laboratories and R&D center, from raw material to finished products, using EC (Eddy Current), leak proof test, zinc spray coating on welding point and internal deburring processes. Your special cut to length requirements can be done in our computer controlled CNC and multi saw lines.

Provides heat control and energy efficiency. Heating expenses are reduced. Do not compromise on natural day light and transparency. Reduces condensation on glass surface. Ensures maximum benefit from solar heat.

Solar Low-e coating provides heat and solar control properties at the same time. Heating and cooling expenses are reduced. In winter cold spots, in summer hot spots by windows are eliminated and heat inside the room is radiated equally.

Facade blinds are one of the most effective sunlight control systems. This type of blinds allows you to control the entry of light into the premises and adjust the direction of the rays at the desired angle. By changing the position of the blind strips, the rays can be directed to the ceiling, floor or the centre of the room. Facade blinds rotated at the right angle block the sunlight rays before they enter the room through the glass. Exterior blinds can be fully folded up or adjusted in the cold season to allow as much solar heat as possible to enter the building. Solar energy controlled in this way can be used as a free heat source. Facade blinds can maintain a temperature of 9 degrees cooler in the room during the warm season. Facade blind strips are made of aluminium. Blinds have anti-corrosion properties, resistance to ultraviolet rays. To maximize protection from the atmosphere factors, the profiles of the blinds are coated with a special polymer during production.

Solarglide Solar Film helps you keep your vessel cool and comfortable for your crew and passengers. Apply to reduce solar heat and control glare whilst allowing light to pass through. Available in a range of sizes and colours to suit your operating environment, adhesive solar film is a cost-effective way to control onboard temperatures and glare while reducing air conditioning use. Available by the roll, by the metre or cut to size it is a great alternative to blinds and curtains on non-navigational windows. We offer a installation service for this product or if you wish to install it yourself, we can provide a comprehensive installation kit with your order.

Your conservatory is a big investment, and naturally you will want to furnish it to the highest standard. SW Blinds have been supplying and installing a range of conservatory blinds for conservatory roofs and sides for many years. Our full range of blinds and window films are ideally suited to the side windows of your conservatory. Many of our stunning fabrics offer high-performance, solar properties, helping to reduce heat and glare during the summer months. During the winter months, blinds can provide energy savings, by helping to insulate. This allows you to make full use of your conservatory all year round. For the roof, we have an extensive range of pleated blinds, in addition to our full range of window films. All of our blinds are designed with ease of use in mind, and will enhance the overall appearance of your conservatory or extension.

ISONEM THERMAL PAINT is special high performance paint containing special vacuumed microspheres that are elastomeric resin based, have vapor permeability with low heat conductivity, high solar radiation absorptivity and high surface heat transmittance values and provide interior and exterior heat and water insulation. Its effectiveness has been proved scientifically. Depending on the applied number of coats, it provides energy savings up to 40% in the heating and cooling energy costs of buildings. When the ISONEM THERMAL PAINT with special vacuum microspheres is used as interior wall paint, the radiant heat that is generated inside is reflected to the interior environment. When it is used on the exterior, the incoming radiant heat is reflected back to the outside. ISONEM THERMAL PAINT FEATURES: •Radiant heat proof, •Provides energy savings up to 40%, •Applicable to indoor and outdoor surfaces, •Low labor costs, easy and short application, •Prevents moisture and mold formation

Introducing the EA Series Buffer Tanks, ranging from 350 to 10000 liters, uniquely designed with removable thermal insulation for unparalleled flexibility. The composite highly effective insulation can be tailored with 80mm thickness for models up to 2000 liters and 60mm for larger capacities, utilizing soft polyurethane foam with an 80mm thickness for volumes exceeding 2500 liters. Operating within a maximum pressure of 3 bar and a peak temperature of 95°C, these buffer tanks adhere to Class C insulation standards, ensuring both safety and efficiency. The user-friendly design allows for easy maintenance and adaptability. Opt for the EA Series Buffer Tanks, where versatility meets cutting-edge thermal performance, offering an ideal solution for your specific needs.

PS 200-2000L Series Buffer Tanks with Removable Thermal Insulation Capacity Range: 200-2000 liters Removable Thermal Insulation: Highly effective composite insulation, 80 mm thick for models up to 2000 liters. For models starting from 2500 liters, insulation is made from soft polyurethane foam, 80 mm thick. Maximum Operating Temperature: 95 degrees Celsius Maximum Working Pressure: 3 bar Insulation Class: Class C Power Supply Compatibility: Accommodates various types of power supply for flexible usage.

Our corrugated tubing systems for use in renewable energies enable increased efficiency thanks to an increased surface area resulting from the corrugated design. In addition, they withstand high mechanical loads, also internal pressure loads, and are highly flexible. Individually adapted cuffs that match commercially available fittings and welded cuffs allow for easy installation and reduce assembly time. The solar hose made by FRÄNKISCHE INDUSTRIAL PIPES is ideal for solar water heating (from 24°C to 30°C). The hose is made of high-quality PE and is durably resistant against saltwater, chlorine, UV radiation and therefore best suited for solar service water heating. Due to pre-molded couplings, it can be split individually and even installed in already existing filter cycles.

Isicam Systems is a K Series product. It is produced with Şişecam Solar Low-E Glasses with high quality heat and solar control coating. By providing effective thermal insulation and solar control, it reduces fuel costs in winter and air conditioning costs in summer Advantages : Compared to ordinary double glazing, it reduces heat losses by 50%, reducing fuel costs in winter, and reducing the penetration of solar heat by 40%, reducing air conditioning costs in summer and providing energy savings. While providing heat and sun control, it does not compromise transparency and natural daylight. With its low reflectivity, it increases the comfort of viewing the landscape in projects where the view is important. It prevents window fronts from being cold in winter and hot in summer, and delays fogging compared to ordinary double glazing. Compared to ordinary double glazing, the expenditure made for Isicam K returns in 1-2 years with the savings to be made in fuel and air conditioning costs.

AQUARIUS 600 SERIES CLOSED CIRCUIT, PRESSURIZED, ENAMELED BOILER WATER HEATER *150 lt. 200 lt. 300 lt. and 500 lt. open and closed circuit boiler *55mm polyurethan insulation *Magnesium anode rod

AQUARIUS 500 SERIES CLOSED CIRCUIT, PRESSURIZED, ENAMELED BOILER TANKER WATER HEATER *150 lt. 200 lt. 300 lt. and 500 lt. open and closed circuit boiler *55mm polyurethan insulation *Magnesium anode rod

The VTN series heat accumulators are made from food-grade stainless steel (AISI 304, 316, 321), offering excellent corrosion resistance. Their smooth inner surface prevents scale formation, making them ideal for applications with strict water quality requirements. The VTN-1 model has two fixed heat exchangers for bivalent systems. The lower exchanger connects to low-temperature sources (solar collectors, heat pumps), while the upper connects to high-temperature sources (gas, electric boilers) for to finish heating of water to the required temperature. The VTN-2 model features a built-in lower heat exchanger for monovalent DHW systems. The VTN-2 PLUS has a larger heat exchanger for efficient use with low-temperature heat sources like condensing gas boilers, heat pumps or solar collectors. The VTN-3 model serves as a storage tank for hot or cold water and is ideal for "turbo-boiler" systems, utilizing layered heat accumulation from top to bottom.

The VTA/N "Tank in Tank" heat accumulator features a stainless steel tank inside a carbon steel tank. This design combines the benefits of both a storage tank and a heat accumulator, allowing for simultaneous use in heating systems and hot water storage. The inner tank is made from high-quality food-grade stainless steel with a wave-shaped wall for increased resistance to pressure, improved heat exchange area, and self-cleaning through thermal expansion. The VTA/N-1 model includes a carbon steel heat exchanger at the bottom for optional connection to solar collectors or other heat sources (heat pump, gas, solid fuel, electric boilers). The VTA/N-2 model lacks a heat exchanger, allowing direct connection to any heat generator. The VTA/N-1-SOLAR PLUS model has an enlarged inner tank partially placed within the heat exchanger, improving efficiency with low-temperature heat sources.