Results for
KROHNE MESSTECHNIK GMBH
Germany
The BM26A-1000 is a magnetic level indicator (MLI) for basic liquid applications. The cost-effective level indicator is particularly suitable for continuous level measurement in water storage tanks, condensate receiver tanks as well as wash and surge tanks for fuels, lubricates, additives or similar chemicals. The level indicator features a rugged metallic design with the magnetic flaps housed in an IP68 rated, hermetically sealed glass tube. It provides a highly visible local level indication. There is absolutely no power supply needed. However, in applications with more advanced signal output requirements, the MLI can be easily equipped with optional reed switches or a reed-chain level transmitter providing analogue or digital output signals.
Request for a quoteR+L HYDRAULICS GMBH
Germany
Cleaning covers Filter and breather filter Level indicators Oil level gauges Plunge heater
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Planters made from stone fibre slabs, in standard and custom shapes and sizes with overflow and, as required, with reinforcement fitted with adhesive and screws. On request, available with automated irrigation unit and water level indicator.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigreen Aluminium Planter for installation outdoors on roof areas or in earthbound open spaces and for installation indoors. Planter made from aluminium in standard and custom sizes with overflow, insulating cladding, and, where required, with welded junction plates as reinforcement. On request, available with automated irrigation unit and water level indicator.
Request for a quoteTEMCA GMBH & CO. KG
Germany
The automatic towel roll dispenser celtex® sensor has a viewing window for filling level indication. The dispenser automatically cuts Airlaid as well as tissue. celtex® sensor consists of plastic and is lockable. Possible adjustments: time delay for paper feed and paper length. It is suitable for Airlaid tissue-towel rolls up to a max. width of 200 mm and a diameter of 200 mm. The dispenser is available in white and black.
Request for a quoteTEMCA GMBH & CO. KG
Germany
The automatic towel roll dispenser celtex® sensor has a viewing window for filling level indication. The dispenser automatically cuts Airlaid as well as tissue. celtex® sensor consists of plastic and is lockable. Possible adjustments: time delay for paper feed and paper length. It is suitable for Airlaid tissue-towel rolls up to a max. width of 200 mm and a diameter of 200 mm. The dispenser is available in white and black.
Request for a quoteTEMCA GMBH & CO. KG
Germany
The slim folded towel dispenser celtex® L -slim consists of plastic. The lockable dispenser has a filling level indicator. celtex® L – slim is suitable for all commercially available folded towels in z-fold, quire fold and interfold. It holds between 250 and 500 sheets. The dispenser is available as white, black and chromed model.
Request for a quoteTEMCA GMBH & CO. KG
Germany
The slim folded towel dispenser celtex® L -slim consists of plastic. The lockable dispenser has a filling level indicator. celtex® L – slim is suitable for all commercially available folded towels in z-fold, quire fold and interfold. It holds between 250 and 500 sheets. The dispenser is available as white, black and chromed model.
Request for a quoteTEMCA GMBH & CO. KG
Germany
The slim folded towel dispenser celtex® L -slim consists of plastic. The lockable dispenser has a filling level indicator. celtex® L – slim is suitable for all commercially available folded towels in z-fold, quire fold and interfold. It holds between 250 and 500 sheets. The dispenser is available as white, black and chromed model.
Request for a quoteTEMCA GMBH & CO. KG
Germany
The hand towel rolls dispenser celtex® autocut has a viewing window for filling level indication. The dispenser automatically cuts Airlaid, as well as tissue rolls. celtex® autocut consists of plastic and is lockable. It is suitable for Airlaid and tissue hand towel rolls up to a maximum width of 220 mm and a diameter of 200 mm. The length of the towels is 280 mm. This dispenser is available in white and black.
Request for a quoteTEMCA GMBH & CO. KG
Germany
The hand towel rolls dispenser celtex® autocut has a viewing window for filling level indication. The dispenser automatically cuts Airlaid, as well as tissue rolls. celtex® autocut consists of plastic and is lockable. It is suitable for Airlaid and tissue hand towel rolls up to a maximum width of 220 mm and a diameter of 200 mm. The length of the towels is 280 mm. This dispenser is available in white and black.
Request for a quoteENNOX BIOGAS TECHNOLOGY GMBH
Austria
Condensation from saturated biogas collects at the lowest points in the pipework, in bends etc. This can negatively influence the effective operation of biogas systems. ennox condensate accumulator is installed at the lowest point in the pipework. The condensate gathers in the container where it can be discharged through a manual tap and/or an automatic siphon. As an option ennox will supply a level indicator or an automatic discharger.
ELKON GMBH
Germany
The cement stored in the cement silos can be quickly discharged to the cement trailers (bulk carrier) by means of ELKON telescopic cement loading bellow. This system has a special structure with support legs allowing the bulk carrier parking under the discharge point and is equipped with a suitable bellow for feeding the material. ELKON telescopic cement loading bellow is equipped with level indicator to stop loading and lift up the bellow when it is in contact with the cement (material filling process is finalized). The bellow is also equipped with fan filter system to prevent powder during the material filling process. The system includes a control panel as well.
Request for a quoteHOPPECKE BATTERIEN GMBH & CO. KG
Germany
The trak | uplift save battery is a lead-acid traction battery optimized for use in dusty and harsh environments. It has a robust battery trough with cover, which protects the battery from contamination and violent damage. The water refill system trak | aquafill and the electrolyte level indicator trak | aquacheck, which are fitted as standard, can significantly reduce water refill intervals and costs. In combination with a HOPPECKE trak | charger HF premium charger, virtually maintenance-free operation can be achieved. trak | uplift save is particularly suitable for rental stores and tough operating conditions.
Request for a quoteENNOX BIOGAS TECHNOLOGY GMBH
Austria
Gas from bio or sewage processing systems are often contaminated with water vapour or very sparsely distributed small particulate matter, which, when used for example in CHP units can cause operating problems or even damage. For the fine cleaning of the gases before utilization an ennox ceramic fine filter is used. In the ennox ceramic fine filter the fine particles contained in the gas are captured by a special fire-clay filter (Pantel). Condensate collects in the form of a moisture layer on the surface of the material and drips into the collector below. An automatic discharge system with level indication can be installed in the base of the digester upon request.
ENVEA
France
Microwave barrier for contactless detection of dry bulk solids with fillingsignalsuppression in containers or chutes. Reliable fill level and limit level detection. • indicates level and material flow • with filling signal recognition • up to 1,000 °C possible with ceramic mounting • insensitive to material caking • usable for profiles up to 25 m • no measurement failure due to strong material flow for filling
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TROTEC GMBH
Germany
OIL HEATER FAN IDE 30Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 30 If you are looking for an equally cost-effective and reliable oil heating solution with clean, dry, warm air for the flexible heating of workshops, storage and production zones, construction sites or halls, the compact oil heater fan IDE 30 is our best recommendation. Owing to its durable housing made of doubly coated material, this indirectly fired oil heater fan is optimally prepared for outdoor heating applications and can further be used for heating closed rooms when applying the optionally available flue gas discharge. The firing of the IDE 30 can variably be made with diesel or fuel oil, the constant supply of which is ensured by a high-quality Danfoss injection pump. The external fuel filter enables an easy access and the current amount of fuel can conveniently be read from the integrated tank filling level indication.
Request for a quoteTROTEC GMBH
Germany
OIL HEATER FAN IDE 80Our most powerful indirect oil heating fan IDE 80 is our recommendation for construction sites, halls, agriculture and workshops! So much hot air for so little money — this is the successful concept of the IDE series which also applies to its currently largest member. The oil heater fan IDE 80 has a heating capacity of 80 kW setting new standards for its own class as well as for heating at construction sites, in workshops and halls as well as in agriculture. The optional flue gas discharge allows flexible use of the indirect-fired oil heater fan IDE 80 for heating enclosed spaces. The IDE 80 is then fired with diesel or fuel oil. Continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss injection pump. Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.
Request for a quoteTROTEC GMBH
Germany
IDS 20 D Oil Fired Direct Heater The IDS 20 D shows mobile heating power with 100 % effectiveness - exactly where you need it. It is completely made in Europe and it is the perfect fit for heating stables with high air flow or construction sites in the winter. Convincing practical advantages: Integrated oil burner with Danfoss® pump Electronic flame safeguard Overheat thermostat Stainless steel combustion chamber Fully automatic aftercooling Double-walled housing for optimal soundproofing and noise insulation Integrated fuel tank Available accessories: External thermostat for fully automatic operation Tank level indicator (available on request) Oil filter filler neck (available on request) More technical data of the IDS 20 D: Heating capacity: 20 kW Air flow: 350 m³/h Input voltage: 230 V / 50 Hz Current consumption: 1 A Fuel consumption max.: 2.04 l/h Tank capacity: 17 litres Length x width x height: 720 x 300 x 450 mm Weight: 20 kg
Request for a quoteTROTEC GMBH
Germany
Convincing practical advantages: Integrated oil burner with Danfoss® pump Electronic flame safeguard Overheat thermostat Stainless steel combustion chamber Fully automatic aftercooling Double-walled housing for optimal soundproofing and noise insulation Integrated fuel tank Available accessories: External thermostat for fully automatic operation Tank level indicator (available on request) Oil filter filler neck (available on request) More technical data of the IDS 30 D: Heating performance: 38.4 kW Air flow: 605 m³/h Mains voltage: 230 V / 50 Hz Power: 1.25 A Fuel consumption max.: 3.66 l/h Tank capacity: 42 litres Length x width x height: 1.050 x 400 x 520 mm Weight: 25 kg
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the...
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the...
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the...
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the...
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...
Request for a quoteResults for
Level indicators - Import exportNumber of results
105 ProductsCountries
Company type
Category