Gas heater - Import export

Electrical gas heaters for operating pressure up to 500 bar - Seal gas heaters, fuel gas heaters - Natural gas heaters for gas pressure regulation stations - LNG and LPG vaporizers - Vaporizers and heaters for industrial gases - Process heaters - Gas heaters for analysis and laboratory application ATEX, IECEx, TR-CU and other international certificates

we are looking for country distributors, buyers

Freek pump and gas line heaters for trace heating are designed to regulate temperatures in order to prevent freezing or condensation in the line. As with all our heaters, these can be designed and produced to your bespoke specifications. A most frequent application for gas & pump line heaters the semi-conductor process in which gases such as Tetraethyl Orthosilicate (TEOS), Boron Trichloride (BCl3), Aluminium Chloride (AlCl3), Chlorine Triuoride (ClF3) and Dichlorosilane (DCS) condense at low temperatures. Should this occur, it could result in wafer defect. Gas and pump line heaters consistently heat the lines and provide a simple heating solution and prevent condensation build up. The optimum line temperature will vary depending on the process.

Preformed silicone heaters are useful for diamters as small as 12 mm and up to 100 mm. Rounded silicone heaters are not possible with self-adhesive foil. Spiral Wrap Pre-Formed Silicone Rubber Heaters are suitable for tubes and flexible pipes and hoses with Ø 6,35 mm (1/4"). Spiral formed flex heaters can be used up to Ø 12 mm (the length of the stretchable silicone spiral wrap heater is reduced accordingly). The thickness of our spiral-wrapped silicone strip heaters is 2,2 mm. Also our gas and pump line heaters, most frequently used in the semi-conductor process, are shaped and pre-formed according to the object geometry to be heated. They are designed to regulate temperatures in order to prevent condensation in the line. Current applications here are Semi Conductors, Vacuum Chambers, Wafer Chucks, Valves, Exhaust & Pump Systems.

Gas Heater Safety Valve,Gas Heater Safety Control gas oven gas Valve

Immersion heaters from 0,1 kW up to 300 kW for tank heating or as components for machines: - Lube oil heaters for compressors, pumps, turbomachinery, refrigeration machines and others - Tank heaters for oil, water and other liquids - Gas heaters for process applications - Anticondensation heaters for electrical motors and machine housings Range from 0,1 kW up to 300 kW ATEX, IECEx, TR-CU and other international certificates

Electrical pocess heaters from 0,5 kW up to 1000 kW including pressure vessel, according ASME, PED or TR-CU. Gas heaters for natural gas, seal gas, fuel gas, industrial gas applications, process gas. Liquid heaters for oil, water and any process liquids. ATEX, IECEx, TR-CU certificates. Operating temperature up to 1000°C Operating pressure up to 500 bar

Screw-in Tubular Heaters are the standard solution for all heating processes with liquids or gas. The heater is installed in a tank or a tube system by the G1½" screw fitting. The IP54 connection head, fitting and tubular heater consists of stainless steel. The tube sheath material 1.4529 is resistant to sulphite, phosphors and hydrochloride media.

* FriCon - gas dehumidification * Gas heaters * ActiCo - activated carbon filters * Gas compressors * Process gas heat exchangers

Explosionproof/flameproof gas preheater EEx d -ATEX und IECEx zertifiziert In general a cooling down takes place at expansion of gases whilst a heating takes place at compression. Typical gases are carbon monoxide, natural gas and air. The temperature change, which occurs at expansion of gas or gas mixture from a high to low pressure i.e. after a gas pressure control is called Joule-Thomson effect. In order to prevent the effects of Joule-Thomson as icing or condensate separation, the gas will be heated up before expansion. The gas pre heaters are suitable for all kind of gaseous media (i.e. air, natural gas, technical gases, fuel gas) and low flow process applications, suitable for pressures up to 300 bar. The “Cast electric heaters” type flameproof electrical gas pre heaters are certified for use in zone 1 or 2 hazardous area, custom built to meet client specification. The gas pre heater consists of a process tube coil and an electrical heating bundle, casted in aluminium. The process gas flows through the tube coil and is heated by the aluminium block that provides the heat transfer. This indirect electric heating gives an accurate control of the process and eliminates pressure vessel design and associated costs.

Flameproof unit air heater ATEX EEx d IIC T3 ATEX The „FUH“ range of flameproof electrical unit air heaters offer a hazardous area, space heating solution, for large premises requiring high heating capacity. They are certified for zone 1 or 2 areas, where the flammable atmosphere is a group IIA, IIB or IIC gas. This heater has an internal fan.

Wherever condensation free warmth is needed without long air transportation ways, on site and immidately effective, the favourable electric heating units of the TDS R series are best choice. Because in comparision to direct fired gas or oil heaters dont consume oxygen and produce no combustion gases, they are well suited for temperature management of unheated inside rooms, workshops or garages. Thanks to the integrated thermostat control the produced warm air flow can be adjusted continuously to the desired temperature. If needed, the heating elements of the TDS 30 R switch on thermostatic controlled additional to the constant fan. Benefits in practise: Multistage temperature control with up to 3 heating stages Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 30 R is suitable for uses in enclosed rooms Easy transportable and easy to use

Flameproof mini line heaters ATEX Ex II 2 G Ex’d’ IIC T4-T6 nach EN60079-0 und EN60079-1 The Exheat range of flameproof mini line heaters consist of a screw plug or flanged type immersion heater mounted in a thermally insulated heating vessel. They are designed to efficiently transfer heat to a flowing medium (liquid, air or gas). All flameproof heaters are fully ATEX certified and designed for use in zone 1 & 2 hazardous areas, gas group IIC.

TDS 50 Electric Fan Heater The TDS 50 electric heater provides a heating performance between 4.5 kW and 9 kW in 3 stages (stage 1 only fan). Furthermore the TDS 50 has an integrated thermostat for continously adjusting the desired temperature. In comparison to direct fired gas or oil heaters, the electric fan heaters of the TDS series dont consume oxygen or produce combustion gases. Because of that this devices can be used everywhere, in particular for temperature control of unheated interiors. Benefits in pratice: 100% TROTEC - development, design, production Multistage temperature control Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 50 is suitable for uses in enclosed rooms Wall and ceiling bracket available - mounting is available as an accessory

In addition to its standard models, ASCO offers a large number of modern and easy to maintain CO2 vaporisers. In accordance to your requirements, we provide you with a suitable model. In order to meet every customer's need, we have different types, technologies and capacity ranges from 100 to well over 2000 kg/h. ASCO offers following technologies Cold water circulation Electric water bath heater Gas heated water bath Electric Atmospheric Individual solutions Costoptimised applications Reliable operation Minimal maintenance Customised adaptations to local conditions Expert knowhow Outstanding customer service

Hot air heaters with gas operation from 23 to 34 kW The K gas hot air heaters are units that work completely autonomously, that is, they do not need heat dissipative elements, which reduces acquisition and installation costs. Its operation can be methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - They do not take up space on the floor. - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - Combustion efficiency greater than 90%.

Hot air heating with portable equipment with butane gas or propane gas for open or properly ventilated premises Hot air heaters with butane or propane gas operation are a really effective system for heating open or properly ventilated spaces. The equipment has a gas-operated burner, which provides an internal flame responsible for heating a small combustion chamber. The air driven by the fan passes through the combustion chamber and the hot air provided in this exchange is used to increase the temperature of the room to be heated.

Gas Thermostatic Valve/BBQ oven thermometer/Oven safety gas valve, Multifunctional control with thermoelectric flame supervision device for gas heater

Universal Gas Thermocouples Used on BBQ Grill or Fire Pit Heater or Gas Water Heater M8x1 End Nut and Head Tip

Most of the Europem incinerators are equipped with waste heat recovery systems. Europem has supplied a wide range of waste heat recovery installations including steam boilers, thermal oil boilers, gas-liquid heat exchangers, gas-gas heat exchangers, bath heaters and air heaters. All waste heat recovery installations are tailored to the needs of the client and the optimal design of the overall installation. Our range of waste heat recovery systems include: -Fired tube boilers with or without economizer. Single pass and multi-pass systems can be supplied Boilers can be equipped with an on-line cleaning system to allow operation with dust-loaded (flue) gases Boilers up to 30 MW capacity can be supplied with pressures ranging from 10 to 22 bar. - Single pass and multi-pass systems can be supplied -Water tube boiler boilers with or without economizer Superheated or saturated steam Horizontal or vertical boiler arrangements Bundles in refractory lined casing or with membrane walls Capacities up to 40 MWth with pressures ranging from 15 to 65 bar. – Thermal oil boilers – Bath heat exchangers – Air – flue gas tube and shell heat exchangers – Flue gas – liquid tube and shell heat exchangers – Air heaters Heat exchangers can be manufactured in carbon steel or high grade alloys e.g. Duplex, Hasteloy, Inconel, AISI 316, AISI 304.

DC inverter Heat Pump, with the advanced DC inverter and EVI technology, can save you 80% heating cost compare with the traditional heating device like gas/fuel boiler and electrical heater. It heats fast and works perfectly with the radiator and floor heater to provide you a comfortable living environment even in very cold winter. It is one of the best heating devices available today. Main Features 1) Twin rotary compressor with inverter control – DC inverter technology control the heat pump output according to the household's energy requirements. Low waste of the power! 2) Electronic Expansion Value allows the accurate refrigerant go through under different working conditions. 3) Intelligent controller and LCD displaying. 4) Safely operation with multi-protections. 5) Auto defrosting function. 6) Hydrophilic coating air exchanger and plate heat exchanger all available. OPTIONAL: R410a, R22, R407c refrigerant is available.

YINI domestic all in one heat pump water heater uses free renewable energy from the air, the unit is highly efficient with low running costs. Its efficiency can be up to 3~4 times more than conventional gas boiler or electrical heater. It is suitable for heating and hot water supply of family, villa, apartment,business restaurant, hotel and multi-floor living building in city and village. Our Air to water heat pump water heater saves up to 80% electrical power energy than normal electric water heater. 150L, 200L are optional.

DC inverter Heat Pump, with the advanced DC inverter and EVI technology, can save you 80% heating cost compare with the traditional heating device like gas/fuel boiler and electrical heater. It heats fast and works perfectly with the radiator and floor heater to provide you a comfortable living environment even in very cold winter. It is one of the best heating devices available today. Main Features 1) Twin rotary compressor with inverter control – DC inverter technology control the heat pump output according to the household's energy requirements. Low waste of the power! 2) Electronic Expansion Value allows the accurate refrigerant go through under different working conditions. 3) Intelligent controller and LCD displaying. 4) Safely operation with multi-protections. 5) Auto defrosting function. 6) Hydrophilic coating air exchanger and plate heat exchanger all available. OPTIONAL: R410a, R22, R407c refrigerant is available.

High efficiency, Homogeneously heat distribution in a short time, Ease to assemble and execute, Economic, Investment and operating costs are lower than, Long life, Electronic ignition system heating system with boiler and tubing system With the low or high step burning system, the desired temperature comfort can be provided easily according to the temperature of the air. Built-in remote control for convenient and easy operation. Technical Features Model Sirokko 20 Sirokko 30 Sirokko 40 Unit 1st-2nd Step 1st-2nd Step 1st-2nd Step Nominal Thermal Power (kW) 10,4 - 17,3 16,4 - 27,2 22,1 - 36,7 Natural gas Consumption (Nm3/sa) 1,1 - 1,81 1,7 - 2,84 2,3 - 3,83 Heating Area (m2) 60 - 120 80 - 150 150 - 225

Gufo HG gas fired heater is designed as an economic heating solution to be used in the winter gardens of restaurants, cafes, hotels and offices, smoking areas and terraces. Impact, moisture and wind resistant stainless steel chassis. Resistant to 1100 degrees and thermal shocks, having 98% heat conduction and aesthetic ceramic glass. With the low or high step burning system, the desired temperature comfort can be provided easily according to the temperature of the air. Built-in remote control for convenient and easy operation. Technical Features 1. Step Power 7 kW 2. Step Power 12,5 kW Heating Area 25-50 m² Natural Gas Consumption 1,3 m³/saat Recommend Hanging Height 2,2 m Natural Gas Pressure 20 - 55 mbar Gas Connector Diameter 1/2’’ Electric Voltage 220-240 V

Gas unit heater free blowing. 90 KW, ErP 2021

The gas heaters are specially designed for the corrosive environment inside greenhouses and tunnels. These are machineries used by professionals in order to obtain the ideal climate for the crops. One may chose between nozzles for natural gas or for propane (GPL). The air admission is made from the exterior. The evacuation of the burnt gases is made through a stainless steel exhaustion system. A thermostat can be equipped on each device in order to regulate the needed temperature. For a more efficient use of the gas heaters, it is recommended to destratify the air inside the greenhouse using recirculation fans. Advantages: - the most efficient means of heating the greenhouse - the possibility of setting the necessary temperature - reduced maintenance costs - relatively low installation costs - zero operation costs (automation) The heater has additional accessories that can be viewed on our website, as well as other types of heating systems.

CHARACTERISTICS optimum thermal efficiency optimum efficiency of the turbine optimum load-case design flow optimized design vibration-optimized design OPTIONS custom specific design on international design codes (ASME, EN 13445, SVTI, AS1210, PD5500 etc.) design acc. to TEMA custom specific TPIs (Inspections / Third Party Inspections) custom specific testings sour gas application (NACE) temperature range -50 °C till + 350°C custom specific nozzle orientation GENERAL Performance Heaters, type VEV-LS are serially arranged heat exchangers, which heat up gas for a subsequent system requirement. Performance heaters can also be designed as coolers in reverse. The design is carried out as a steel welded construction in a horizontal design. FUNCTION Fuel Gas Performance Heater Type VEV-LS are used in high efficient combined-cycle gas and steam power plants (CCPP).

Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser