Binding - machinery and equipment - Import export

Using for attaching the grommets.

GENERAL OPERATION The machine is built-up of a rotating plate and a knot device that allow to create the requested wire ties. When the cycle is running, the pinch roll insert the wire in the machine and the rotating plate starts to rotate creating the wire ties. The crossed ends of the wire are held together and twisted by rotation of the gripper. AUTOMATIC CYCLE When the operator press the “start” button, the automatic cycle command is sent to the machine. This signal allow to insert the wire into the rotating plate following the sequence below: - Realignment and lifting of the twister. - Realignment of the wire step cylinder. - Closing of the pinch roll. - Moving forward of the puller. - Insertion of the wire by means of forward rotation of the pinch roll. When the twister is in high position, the puller is moved forward, in order to pull out the wire ties. With a time delay, the machine starts a new tying cycle (according to the number of the ties set in the operator’s panel).

Manufacturer: ATS Mechatronics srl - Automazioni Industriali Capitanio (AIC) Min stack size: 150 x 150 mm Max stack size: 500 x 500 mm Wire diameter (upon customer's request): 5,5 ÷ 8 mm Knot position: 45 degrees Number of turns (Selectable via control panel): 1 or 2 Turn type (Selectable via control panel): Tight or Loose Installed power: 20 kW Working pressure: 120 bar (Hydr.) Tying cycle: 7,5 s

Mobile Pile Turner Maxi Toppy Adv is an electrically powered pile turner used to quickly overturn piles is small areas. It is ideal for the large formats of the graphic industry, as it can handle pallets of paper up to a maximum weight of 1800 kg, and with size from 70 x 100 cm up to large formats of 120 x 160 cm.

This version of Master Toppy can effortlessly be managed by the operator from the control panel. The air jogger allows for sheet separation , alignment and dust removal.

Maxi Toppy mobile pile turner comes with flat legs that are ideal for loads of carboard up to 1500 Kg and sizes up to 1500x2000mm. The base is wide and the legs are lower than the pallet and easy to insert. The pile turner is electrically powered and doesn't need much space.

maximum size 225 x 320 mm, maximum number of pages 120, stitching with 2 or 4 metal clips V2 binding (bonded) — Hotmelt and PUR glue maximum format 210 x 430 mm (back edge 430mm), spine thickness 440 mm, folding, creasing embossing, perforation laminating foil embossing, blind printing envelopes — automatic document loading into mail envelopes of C6, DL, C5 Special finishing machines Printing Press Collator — laying down and finalizing multisheet forms. We can produce a form with a maximum of 7 sheets. VariWeb — bonding, cutting, laminating, shaped embossing, applying adhesives. This is mainly used for producing integrated cards and integrated stickers (link) up to the size of A3.

Flowing the dry cleaning of wheat, it is used for the humidity of wheat with a little consumption of water and time. At the same time, the wheat is unshelled also because of the two rotor, which turns with high speed.It can add up to 7% of water in a single flow-through.

It is used to separate heavy foreign materials such as stones, glass and metal pieces or soil pieces in the grain with the help of screening method and air. The machine consists of a fixed chassis and vibrating body. The stone separator, designed considering the difference in density of stone and grain, separates the stone by directing the grain in the direction of gravity, in the opposite direction of gravity, with the help of vibration. Wheat is separated from the stones with the help of a vibrating sieve. In addition, dust is absorbed by the air aspiration provided from the ventilation line. Apart from flour and semolina factories, it is also used in all grain factories, vegetable oil factories, cocoa and coffee processing plants.

It is utilized as a part of the flour plants to isolate any outside material that might be blended into conclusive item amid processing procedure or capacity. The remote materials isolated from item before pressing, item stockpiling or mass stacking storehouse. FEATURES - MFDJ It is utilized as a part of the flour plants to isolate any outside material that might be blended into conclusive item amid processing procedure or capacity. The remote materials isolated from item before pressing, item stockpiling or mass stacking storehouse. - MFNM - Best machine in practice. - Most economic spare parts. - Long life. - Seperation of fat with intensive operation. - Nindamac helps to achive high aqualit diffrent granulation of finished product with low fat content. For high technology degermination done by Nindamac by the

While the grain is carried upwards with the anchors made of hard material resistant to abrasion formed in appropriate dimensions on the rotor in an angled semi-cylindrical body made of stainless steel, the water is absorbed by the grain by subjecting it to intensive mixing at a measured speed. It is used in grain processing plants to ensure that the desired moisture content of the grains penetrate and feed the grain sufficiently. It brings the grain to be annealed with water and provides a homogeneous mixture. At the same time, a significant amount of peeling is ensured in the grain shell as a result of friction caused by the rotor rotating at high speed. Application Fields ◾ At food industry ◾ At the dry cleaning units of the flour and semolina mills ◾ At the grain processing plants where moistening process is required

It is used for separating garbage, straw, ear, other coarse and small foreign matter from wheat and other whole grains. In the food industry; In flour and semolina factories, seed cleaning facilities, grain cleaning and calibration facilities, grain factories, feed mills, silo facilities. In other similar industrial facilities; Low power consumption, high efficiency and high capacity Easy and minimum maintenance, trouble-free operation thanks to vibro-motor drive, Possibility to reach maximum capacity and efficiency for various grains with adjustable sieve angle, Durability and longevity Quick and easy replacement of sieves, practical cleaning possibility Quiet working

Thanks to the belt-pulley mechanism driven by an electric motor, the rotational motion is transferred to the sieve shaft. The sieve weights, which are placed unbalanced, connected to the sieve shaft, make the sieve vibrate. The position of the screen weights can be adjusted around the screen shaft in order to change the vibration amplitude of the screen. The screen is hung on the ceiling of the place where it is located by means of composite rods in order to create the vibration comfortably. Thanks to this vibration movement, in specially designed sieve boxes, the incoming product is classified and sifted according to its grain size. The product to be screened is sent to the screening area through one or more inlet pipes. Various types of silk-covered cases allow separation in seven channels. This part is directed to the outlet by the channel. After the product is sifted, it is sent to the outlet pipe on the bottom plate. It also has sight pipes for product control and monitoring.

It is used for breaking and crushing wheat in flour factories. The most important machine of the flour mill, the roller mill consists of two pairs of roller balls operating in parallel. Unlike the pneumatic roller, the incoming product amount is measured with the help of a sensor or load cell. Feeding rollers change speed according to the incoming product amount and provide homogeneous flow. At the same time, the gap between the rolls is closed by pneumatic pistons and allows the product to be grinded by passing through the rolls. The bearings of the rolls are ductile iron and the arms of the rolls are conical. It is produced with gear drive and belt drive. It can also be produced with an optional touch control screen. Especially thanks to the side covers that can be opened one by one based on the opening system, it provides fast and easy access and the possibility of rapid ball removal with the cover opened on the ball.

By separating the flour particles adhered to and remaining in the bran, it both prevents the loss of flour and increases the efficiency. Thanks to the special pallets on the rotor that rotates horizontally, the flour is separated from the bran while being thrown towards the screen. The centrifugal directed product strikes the pore size preselected screen. Thus, it is ensured that the flour particles are directed to the outside of the sieve and the bran to the outlet channel from the inside. Applications Fields ◾ Flour Mills ◾ Semolina Mills

This machine is utilised for blending of various sort of grain as asked for rates and conformity of limit before processing area or treating segment. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

Instantly measure and display of humidity and hectoliter of wheat Calculation of water flows according to the required humidity. Automatic water dosage according to the calculated water flow value Automatic water dosage according to the wheat flow variation by the connection of wheat flow control or measure unit Alarms of failure More than one humidity – hectoliter measuring unit and water the dosage unit can be controlled by the PLC control unit.

The Air Channel is used for cleaning wheat, barley, legumes and soybeans. The machine removes all kinds of light materials different from cereal grains in terms of aerodynamic properties: garbage, straw and spike fractures, various seeds, peeled shell and dust from the product by means of air flow. While the grain products are distributed homogeneously in the width of the Air Channel with the feeding table of the machine or a vibrating feeder, the light particles in it are conveyed to the upper outlet channel with the air flow coming from the bottom, and the cleaned product falls down and transferred into the system. ◾ The lighting created by the window enables the separation to be seen clearly and thus all kinds of air adjustments can be made. ◾ Manufactured in two types, this machine with vibro motor is usually used with a Peeler machine, the non-motorized one is used with a Garbage Purifier machine.

Moving through the centre, the product is transported to a horizontally positioned blade rotor. During rotation, the product is pushed against the wall of the machine and the eggs, if any, are destroyed inside the machine.

ZWP is one of the leading independent manufacturer in Germany for gears, pinions and rim gears. We supply already well-known manufacturers for gear boxes, drive technology and are looking forward to new customers. Sectors of our (international) customers are: Mining, Oil, Offshore, rail and ship transmissions, industrial transmissions, and many more fields of applications. Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / rim gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible Cooperation with companies for special manufacturing of gears and pinions etc We speak English. ZWP is looking forward hearing from you.

ZWP is one of Germany’s largest independent gear, pinion and shaft manufacturers. We manufacture according to customer drawings and supply renowned customers from a wide variety of industries. We also supply renowned customers on an international level with our products for mining technology. Here is an overview of our production possibilities: Internal toothed rings hardened and grinded Module up to 20 mm Diameter 100 to 1,800mm Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Interlocking shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible We manufacture for different customers: mining, rail, wind power, shipping, industry and special machinery. Production is carried out according to customer drawings and standards. Further information in the first interview. We look forward hearing from you.

ZWP is one of the leading independent manufacturer in Germany for gears, pinions and ring gears. We supply already well-known manufacturers for gear boxes, drive technology and are looking forward to new customers. Sectors of our (international) customers are: Mining, Oil, Offshore, rail and ship transmissions, industrial transmissions, and many more fields of applications. Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / ring gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible Cooperation with companies for special manufacturing of gears and pinions etc We speak English. ZWP is looking forward hearing from you.

DESIGN - MANUFACTURE - INSTALLATION - COMMISSIONING COMPLETE INSTALLATIONS MINING - QUARRYING - RECYCLING

PRODUCT SPECIFICATIONS It has an air blowing system. It has a flouring system. It works silently and has a long life. It is made of 304 quality stainless steel.

DSUE series are mobile flour sifting machines. Thanks to the 800 micron silk tulle used, no substance other than flour passes through the sieve. Separated external substances are collected in a garbage bag. With this system that ventilates the flour and breaks the stoned flour, 50 kg of flour can be sifted in 1.5 minutes. PRODUCT SPECIFICATIONS 50 kg flour sifting in 1.5 minutes Produced from 304 quality stainless steel Works silently, has a long life Can be prepared as electrostatic oven painted or completely 304 quality stainless steel

DKDM series is designed to save time, energy and especially to make hygienic production by transferring the dough in the GKHYM series mobile bowl to the desired environment in a practical way. PRODUCT SPECIFICATIONS Hydraulic lifting system Reinforced body Parts in contact with food are made of 304 quality stainless steel Quiet operation Emergency stop button Lifting and lowering function with a single press Electrostatic oven painted surface "DKDM -700 It is prepared with special dimensions upon order."

DSPM series are standard mixers. It has a double-speed motor and belt-pulley equipment. The dough mixing process is completed in 18 minutes. It can be used in making dough, meatballs, butter, minced meat, cream, tobacco, cookies and similar products. PRODUCT SPECIFICATIONS Time setting Reinforced body Double-speed motor Parts in contact with food are made of 304 quality stainless steel. Electrostatic oven painted surface

The settings are made easily from the PLC-controlled touch screen. Mechanical settings are simple to use and easy to learn. Information on usage can be stored in memory and used continuously. Daily cleaning is easy. It is easy to disassemble, install and replace belts and running parts. The speeds of all belts can be adjusted to the desired level. Electrical and electronic faults that may occur are displayed on the PLC screen with pic and text.

The settings are made easily from the PLC-controlled touch screen. Mechanical settings are simple to use and easy to learn. Information on usage can be stored in memory and used continuously. Daily cleaning is easy. It is easy to disassemble, install and replace belts and running parts. The speeds of all belts can be adjusted to the desired level. Electrical and electronic faults that may occur are displayed on the PLC screen with pic and text.