Beryllium - Import export

About Beryllium Oxide (BeO) Ceramic: No other oxide ceramic material collectively exhibits these highly desirable properties and characteristics. BeO ceramic conducts heat more quickly than virtually all metals with the exception of copper and silver. Beryllia exhibits extremely low dielectric loss characteristics, possesses high electrical resistivity, and offers excellent strength with high specific stiffness properties. BeO provides all the desirable physical and dielectric characteristics exhibited by an aluminum oxide or aluminum nitride, in addition, offers thermal conductivity ten times higher than alumina, and fifty percent higher than aluminum nitride, a dielectric constant that is lower than both alumina and aluminum nitride, and weight per given volume that is fully a quarter less than alumina, and nearly ten percent less than aluminum nitride. As a thermally conductive and electrically insulating material, its performance is exceeded only by that of the diamond.

No other oxide ceramic material collectively exhibits these highly desirable properties and characteristics. BeO ceramic conducts heat more quickly than virtually all metals with the exception of copper and silver. Beryllia exhibits extremely low dielectric loss characteristics, possesses high electrical resistivity, and offers excellent strength with high specific stiffness properties. BeO provides all the desirable physical and dielectric characteristics exhibited by an aluminum oxide or aluminum nitride, in addition, offers thermal conductivity ten times higher than alumina, and fifty percent higher than aluminum nitride, a dielectric constant that is lower than both alumina and aluminum nitride, and weight per given volume that is fully a quarter less than alumina, and nearly ten percent less than aluminum nitride. As a thermally conductive and electrically insulating material, its performance is exceeded only by that of the diamond.

A complete turnkey service for all Technical Brushes & Seals from concept through to delivery and after-sales. Please contact us for information.

Beryllium Oxide (BeO), which is commonly referred to as Beryllia, is endowed with a virtuously unique combination of thermal, electrical, optical, and mechanical properties which may be exploited for a diverse range of applications from thermal management systems for integrated electronics to high-performance refractory components for nuclear reactors.

Our Spinodal materials are custom-engineered for safety hand tools that are non-sparking, non-magnetic and highly corrosion resistant. They benefit from age hardening techniques that further increase their strength and hardness for high performance safety tools. Alloys AM 388™ (UNS C72650) is a copper based Spinodal alloy that offers non-sparking, non-magnetic and high strength properties. AM 388™ is accepted as a safe replacement material for Beryllium Copper alloy. Safety Tool Applications Engineered for an array of hand-held non-sparking safety tools including: Corrosion resistant wrenches Hammers, axes and picks Corrosion resistant screwdrivers, pliers and spatulas

We offer two Spinodal alloy grades produced through the same wrought powder metallurgy as copper based products with nickel and tin additions. Our Pfinodal® (C72900) and AM 388® (C72650) spinodal materials deliver similar mechanical properties to Beryllium Copper alloy (C17200) but without the carcinogenic exposure risks. Advantages include: No carcinogenic elements - only copper/nickel/tin Ductile state and heat treatable Electrically conductive Reduced distortion during heat treatment Reduced stress relaxation Safe Alternative to Beryllium Copper (UNS C17200) Recently, Pfinodal® and AM-388® have been chosen as a replacement for Beryllium Copper due to the carcinogenic effects of Beryllium and fears of bans on Beryllium containing products due to REACH, RoHS, and OSHA mandates. Spinodal materials are gaining acceptance in new projects as well as legacy qualifications as manufacturers, OEMs, and consumers reject products

We manufacture bar and tube products in our corrosion resistant Spinodal alloy, Pfinodal® (C72900), for use in downhole housings, centralizers, and joints that operate in demanding subsea environments. Advantages Our Copper nickel tin Pfinodal® (C72900) bar and tube products present a combination of unique properties that deliver significant advantages for downhole oil and gas applications. Non-sparking and non-magnetic Anti-galling Anti-corrosive Heat treatable to high hardness Safe alternative to Beryllium Copper (BeCu) Pfinodal ® (C72900) Bar and Tube C72900 copper alloy materials are available in bar and tube sizes up to 6” (152.4mm) diameters as well as in both strip and plate products. Our C72900 material is generally provided as machining bar in the aged condition with many sizes available to ship from inventory. We also offer the ability to provide turnkey solutions by providing fully machined parts to OEM drawings.

AMETEK Specialty Metal Products has led the industry in the production of Pfinodal® (C72900), a highly specialized Spinodal alloy, with superior bearing properties. Our production processes and heat treatments combine to ensure the high hardness required in tough drill bit material for bearing components such as sleeves, bushings, washers and caps. Our Pfinodal® (C72900) bearing materials has been in use for 20 years under patent numbers 5527113 and 5552106 for these rock bit bearing applications. Advantages The near-net shape processing of our Spinodal materials eliminates waste thereby reducing cost for the finished product. We specialize in offering the turnkey solutions of materials that are machined, plated and packaged to your specifications. These can be shipped to your facilities around the world for incorporation in the bits, reamers and equipment needed to power the world.

Our specialized Pfinodal® C72900 material is a Spinodal copper based alloy with nickel and tin additions. It competes with Beryllium Copper alloy C17200 for electrical connectors and bearing materials where high strength and excellent formability without dimensional instability are required.

Our highly specialized Spinodal materials are custom-engineered for electronic connectors and deliver major advantages in comparison to traditional materials such as Beryllium Copper (BeCu). We offer precision strip and wire products in alloy Pfinodal® (UNS C72900), a copper nickel tin Spinodal alloy, for the manufacturing of high performance electronic connectors in the electronics industry. Safe Alternative to Beryllium Copper (BeCu) Beryllium Copper (BeCu) materials are the historical choice for electronic connectors. Our high performance Pfinodal® (UNS C72900) delivers similar mechanical properties to Beryllium Copper but without the harmful exposure risks.

Beryllium Copper 25 is a Copper base alloy with the capability of being strengthened by precipitation heat treatment. The alloy furnishes the best combination of electrical conductivity, corrosion resistance and mechanical strength necessary for numerous electronic and electromechanical devices. The alloy is quite satisfactory for fabrication with good formability and joining characteristics. Forming is readily accomplished from the annealed temper. Severe bending will be less successful from hard or heat treated tempers and requires large fold radius ratios. Beryllium Copper 25 is able to be soldered, brazed, and welded by most standard techniques. The brazing temperature must be kept under 1450º F and cycle time minimized to avoid loss of heat treated strength. Heat treating should be performed subsequent to welding to obtain uniform high strength. The alloy is not susceptible to an increase in magnetic attraction from plastic deformation during service

HPM® Beryllium Nickel is a Beryllium-Nickel alloy capable of high strength through precipitation heat treatment. The excellent spring characteristics to 550°F make it suitable for many of the most demanding electromechanical devices. The alloy can be readily formed and even deep drawn from the annealed temper. Cold rolled tempers prior to heat treatment can be blanked and folded provided a radius to thickness ratio approaches 2.0. The optimum heat treatment for highest strength is 925ºF for 2 hours. The material can be joined using conventional TIG methods, silver brazed and soldered. Available Sizes: HPM® Beryllium Nickel is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.025” in (0.0127 to 0.635 mm) widths up to 7.0” (177.8 mm). A foil product is available as thin as 0.000085” (0.002159 mm) and widths of 4.0” (101.6 mm) maximum. The material conforms to UNS N03360.

Non Sparking TOOLS Striking Wrench Ring End Non-Sparking, Non-Magnetic, Corrosion-Resistant  Made in China CodeSpecs OY6160 17、19、22、24、27、30、32、34、36、41、 46、50、55、60、65、70、75、80、85、90、 95、100、110、120、130、140、150(mm) Our beryllium mater alloy import from Kazakhstan,which make the raw materials of non-sparking safety tools pure,and ensure our non-sparking safety tools high quality compared with others.And our non-sparking safety hand tools are punch forged manufacturing processes,best quality design and manufacturing processes,make non sparking safety tools high density and strength. There are 2 kinds of non-sparking, non-magnetic materials available: 1.Be-Cu: Beryllium Copper (Best material for Non Sparking Non Magnetic Safety Hand Tools, the very highest quality); 2.Al-Cu: Aluminium Bronze (Economic material for Non Sparking Safety Hand Tools, still excellent).

Non Sparking Tools Striking Wrench Open Copper Beryllium NumberSpecification OY6141-1717mm OY6141-1919mm OY6141-2222mm OY6141-2424mm OY6141-2727mm OY6141-3030mm OY6141-3232mm OY6141-3636mm OY6141-3838mm OY6141-4141mm OY6141-4646mm OY6141-5050mm OY6141-5252mm OY6141-5555mm OY6141-6060mm OY6141-6565mm OY6141-7070mm OY6141-7575mm OY6141-8080mm OY6141-8585mm OY6141-9090mm OY6141-9595mm OY6141-100100mm OY6141-110110mm OY6141-120120mm OY6141-130130mm OY6141-140140mm OY6141-150150mm Our beryllium mater alloy import from Kazakhstan,which make the raw materials of non-sparking tools pure,and ensure our non-sparking tools high quality compared with others.And our non-sparking safety hand tools are punch forged manufacturing processes,best quality design and manufacturing processes,make non sparking safety tools high density and strength.

NON SPARKING TOOLS CHAIN PIPE WRENCH COPPER BERYLLIUM NumberSpecification OY6129-1002100*600mm OY6129-1004150*600mm OY6129-1006200*900mm OY6129-1008300*900mm Our beryllium mater alloy import from Kazakhstan,which make the raw materials of non-sparking tools pure,and ensure our non-sparking tools high quality compared with others.And our non-sparking safety hand tools are punch forged manufacturing processes,best quality design and manufacturing processes,make non sparking safety tools high density and strength. There are 2 kinds of non-sparking, non-magnetic materials available: 1.Be-Cu: Beryllium Copper (Best material for Non Sparking Non-Magnetic Tools, the very highest quality); 2.Al-Cu: Aluminium Bronze (Economic material for Non Sparking Tools, still excellent).

Non Sparking Tools Sledge Hammer 2000g Copper Beryllium NumberSpecification OY6192A-10021000g OY6192A-10041400g OY6192A-10061500g OY6192A-10081800g OY6192A-10102000g OY6192A-10122200g OY6192A-10142500g OY6192A-10162700g OY6192A-10183000g OY6192A-10203600g OY6192A-10224000g OY6192A-10244500g OY6192A-10265000g OY6192A-10285400g OY6192A-10306400g OY6192A-10327200g OY6192A-10348000g OY6192A-10368200g OY6192A-10389100g OY6192A-10409900g There are 2 kinds of non-sparking, non-magnetic materials available: 1.Be-Cu: Beryllium Copper (Best material for Non Sparking Non Magnetic Safety Hand Tools, the very highest quality); 2.Al-Cu: Aluminium Bronze (Economic material for Non Sparking Safety Hand Tools, still excellent).

Non Sparking Tool Pipe Wrench 600mm Copper Beryllium NumberSpecification OY6131-100225*200mm OY6131-100430*250mm OY6131-100640*300mm OY6131-100850*350mm OY6131-101060*450mm OY6131-101275*600mm OY6131-101485*900mm OY6131-1016110*1200mm Our beryllium mater alloy import from Kazakhstan,which make the raw materials of non-sparking tools pure,and ensure our non-sparking tools high quality compared with others.And our non-sparking safety hand tools are punch forged manufacturing processes,best quality design and manufacturing processes,make non sparking safety tools high density and strength. There are 2 kinds of non-sparking, non-magnetic materials available: 1.Be-Cu: Beryllium Copper (Best material for Non Sparking Non-Magnetic Tools, the very highest quality); 2.Al-Cu: Aluminium Bronze (Economic material for Non Sparking Tools, still excellent).

Non Sparking Tool Socket Set 1/2"Dr 32 Pcs CodeSpecs OY6101J Socket 8mm,9mm,10mm,11mm,12mm, 13mm,14mm,15mm,16mm,17mm,18mm, 19mm,20mm,21mm,22mm,23mm,24mm, 26mm,27mm,28mm,30mm,32mm 13/16″Spark Plug Ratchet Wrench 245mm Sliding T-Handle 250mm Speed Handle 400mm Driver Extension 125mm,250mm Universal Joint 80mm Screwdriver Socket 52mm Offset Handle 230mm Socket Case There are 2 kinds of non-sparking, non-magnetic materials available: 1.   Be-Cu: Beryllium Copper (Best material for Non Sparking Non-Magnetic Tools, the very highest quality); 2.   Al-Cu: Aluminium Bronze (Economic material for Non Sparking Tools, still excellent).

Copper beryllium semifinished product with high strength