Back doors - Import export

1. Door frame 83 mm 2. Residential sash 130 mm 3. 60 x 40 x 2 mm steel, closed by welding, for an enhanced reinforcement 4. Residential door hinges 5. Weldable corner for an enhanced reinforcement 6. Additional seal on the sill 7. Aluminium drainer with brush and gasket 8. Aluminium lintel with heat barrier 9. Insulation Gaskets: 3 10. HPL plate 2 mm / Aluminium 2 mm / 52 mm thickness Standard: cylinder with the manufacturer's key.

Workbench series 2000/500 Worktop in beech multiplex 2000x750x40 mm left: 1x door 450 mm, 1x drawer front 150 mm middle: 1x shelf in half depth, back panel right: 1x door 450 mm, 1x drawer front 150 mm, drawers with full extension 100%, load capacity 100 kg drawer interior dimension: 450 x 600 mm total load capacity 1000 kg WxDxH 2000x750x859 mm

BEST POSSIBLE ERGONOMICS & EFFICIENCY OF MAINTENANCE: FOR OPERATORS No platform required for machine loading and operating area Pivotable main control panel with good visibility into the work area FOR MAINTENANCE & SERVICE Sliding doors on the back provide generous central maintenance access to the machine, doors in the setup room can be opened wide Central and easily accessible media supply, hydraulic unit and maintenance access for A and W axis through movable housing segment

NAME OF THE PRODUCT: FEED MIXER WAGON MODEL OF THE PRODUCT: VERTI-12 TYPE OF AUGER: vertical DISCHARGE TYPE: optional VOLUME(cbm): 12 NUMBER OF AXLE: 2 NUMBER OF AUGERS: 2 HYDRAULIC POWER: Tractor NUMBER OF KNIVES: 16(8x2) OVERALL LENGTH: 5950mm MINIMUM REQUIRED HP : 70 HP OVERALL WIDTH: 2350mm POWER: PTO OVERALL HEIGHT: 2800mm optional BACK LOADER: WEIGHT: 4500kg SIDE OF DISCHARGE: right Sheet metal thickness of the auger 12 mm optional DIGITAL SCALE: PTO DRIVE 540 RPM Time spent to mix for one load 15minutes Sheet metal thickness of the bottom 20 mm Maximum number of Dairy Cows which can be fed with one load 90-100 cattle Sheet metal thickness of the side walls 6 mm

Keytracker provide a range of bespoke steel cabinets. Each cabinet is designed to hold a maximum of two mechanical key systems or two hook panels, one that will fit inside the cabinet and one that will fit on the back of the door.

Specially developed for use under high vacuum, our vacuum chamber VC P400x400 HV is made of a unique, flexible chamber system based on extruded aluminium profiles. The three-metre long profiles are cut to the required length and fitted with a screwed rear wall, as well as a door. Unlike our standard VC P400x400, the VC P 400x400 HV has no slots in the side walls. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: up to 3000 mm (standard: 625 mm) Width: 400 mm Height: 400 mm Connections 1 x KF 16 6 x KF 40 Additional flanges possible in any position

The VC M600² is based on our new modular chamber system. The system consists of individual, fully milled aluminum modules with a depth of 500mm. Thus the length of the chamber can be variably set in 500mm steps. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: 1000 mm (modular in 500 mm steps) Width: 600 mm Height: 600 mm Connections 2 x KF 16 6 x KF 40 1 x ISO K 63 1 x ISO K 160 Additional flanges possible in any position

The Vacuum Chamber VC P700D is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Excellent thermal conduction ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: up to 3000 mm (standard: 1000 mm, 1400 mm) Inner diameter: 640 Ø Outer diameter: 700 Ø Front panel (optional): 18 U (1 U = 44.45 mm) Connections 2 x KF 16 2 x KF 40 2 x ISO K 63 Additional flanges possible in any position

The Vacuum Chamber VC P400x400 is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. Slits are provided in the side walls of the profile for easy insertion of the product carriers. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Excellent thermal conduction ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: up to 3000 mm (standard: 625 mm) Width: 400 mm Height: 400 mm Front panel (optional): 10 U (1 U = 44.45 mm) Connections 1 x KF 16 6 x KF 40 Additional flanges possible in any position

The Vacuum Chamber VC P150x160 is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. Slits are provided in the side walls of the profile for easy insertion of the product carriers. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Excellent thermal conduction ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: up to 3000 mm (standard: 325 mm, 600 mm) Width: 150 mm Height: 160 mm Front panel (optional): 6 U (1 U = 44.45 mm) Connections 4 x KF 16 1 x KF 40 Additional flanges possible in any position

The VC M1200² is based on our new modular chamber system. The system consists of individual, fully milled aluminum modules with a depth of 500mm. Thus the length of the chamber can be variably set in 500mm steps. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: 1000 mm (modular in 500 mm steps) Width: 1200 mm Height: 1200 mm Connections 2 x KF 16 6 x KF 40 1 x ISO K 63 1 x ISO K 160 Additional flanges possible in any position

The VC M1000² is based on our new modular chamber system. The system consists of individual, fully milled aluminum modules with a depth of 500mm. Thus the length of the chamber can be variably set in 500mm steps. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: 1000 mm (modular in 500 mm steps) Width: 1000 mm Height: 1000 mm Connections 2 x KF 16 6 x KF 40 1 x ISO K 63 1 x ISO K 160 Additional flanges possible in any position

The Vacuum Chamber VC P400X600 is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Excellent thermal conduction ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: up to 3000 mm (standard: 625 mm) Width: 400 mm Height: 600 mm Front panel (optional): 16 U (1 U = 44.45 mm) Connections 1 x KF 16 7 x KF 40 Additional flanges possible in any position

The Vacuum Chamber VC P240X240 is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. Slits are provided in the side walls of the profile for easy insertion of the product carriers. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Excellent thermal conduction ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: up to 3000 mm (standard: 420 mm, 600 mm) Width: 240 mm Height: 240 mm Front panel (optional): 8 U (1 U = 44.45 mm) Connections 2 x KF 16 3 x KF 40 Additional flanges possible in any position

The Vacuum Chamber VC P572X125 is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Excellent thermal conduction ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: up to 3000 mm (standard: 300 mm, 650 mm) Width: 572 mm Height: 125 mm Connections 1 x KF 16 4 x KF 40 Additional flanges possible in any position

The Vacuum Chamber VC P110x120 is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. Slits are provided in the side walls of the profile for easy insertion of the product carriers. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Excellent thermal conduction ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: up to 3000 mm (standard: 300 mm, 600 mm) Width: 110 mm Height: 120 mm Front panel (optional): 5 U (1 U = 44.45 mm) Connections 3 x KF 16 Zusätzliche Flansche in beliebiger Position möglich

The Vacuum Chamber VC P305X300 is made of a unique, flexible chamber system based on extruded aluminium profiles. The three meter long profiles are cut to the desired length and equipped with a bolted rear wall and a door. ✓ Flexible length of max. 3 meters ✓ Very fast delivery because only door and back wall must be supplemented ✓ Low-cost ✓ Low-weight ✓ Low desorption of the aluminium, therefore also suitable for high vacuum ✓ Highly clean processes possible, e.g. in the semiconductor field ✓ Easy operation ✓ Easy attachment to the existing division bars Vacuum chamber specifications Internal dimensions Length: up to 3000 mm (standard: 370 mm, 620 mm) Width: 305 mm Height: 300 mm Front panel (optional): 9 U (1 U = 44.45 mm) Connections 1 x KF 16 5 x KF 40 Additional flanges possible in any position

back bar two door from the factory

-Walls are made of round tube. -Doors: upper one is hinged, lower one – is turning, opens aside together with upper door. Height of each door is 632 mm. -Horizontal bars on the sidewalls, back wall and doors are made of the flat bar. It adds more hardness to the container. -Container is entirely meshed that allows automated wash. -Work load: 270kg. -Weight of the product – 35 kg. -External dimensions (W*D*H): 710*800*1620mm -Mesh size:150*450mm. -Finishing external: Galvanic zinc. Тhe container is equipped with: -metal pocket/plate -plastic panel for meshed bottom -castors Ø125mm (2 pcs – swivel, 2 pcs – fixed) Additional options: -foot kip -swivel castors with break -magnet plate -branded sticker Contact us to check possible dimensions and other options.