Results for
NOVOSIM
Turkey
This system is very valuable for testing the durability and expected life of the transmissions, axles, gears, transfer cases and shafts under various scenarios. It is hard to do vehicle level durability tests and without the need of getting the vehicle on the road for replicating claims caused by the powertrain, such type of a custom system help replicate the driving conditions where problems occur and the engineering team can develop a solution and iterate on the bench. Easy to use user interface; simplicity in get the system running in a target time is our most important goal. Operators in a test center can quickly receive training and begin running a variety of scenarios. Data from low speed channels such as sensors including thermocouples, RTD temperature sensors, pressure sensors and others can be collected whereas data from fast channels such as acceleration or microphone are collected through data collection (DAQ) systems, depending on the customer's preference.
Request for a quoteIGUS® GMBH
Germany
Other information Series E1.10 Inner height hi: 10 mm Inner height Bi: 13 mm Bending radii R: 18 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series E1.17 Inner height hi: 17 mm Inner width Bi: 21 - 44 mm Bending radii R: 28 mm Pitch: 25,5 mm E-Chain®, snap-open along the outer radius E1.18 series Inner height hi: 18 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25.25 mm E-Chain®, snap-open along the outer radius Series E1.20 Inner height hi: 20 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25 mm E-Chain®, snap-open along the outer radius UL94-V2 classification Series E1.10 Inner height hi: 10 mm Inner height Bi: 13 mm Bending radii R: 18 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series E1.17 Inner height hi: 17 mm Inner width Bi: 21 - 44 mm Bending radii R: 28 mm Pitch: 25,5 mm E-Chain®, snap-open along the outer radius E1.18 series Inner height hi: 18 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25.25 mm E-Chain®, snap-open along the outer radius Series E1.20 Inner height hi: 20 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25 mm E-Chain®, snap-open along the outer radius Other information E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Shortening and lengthening of the E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E-Chain® Applications Overview E-Chain® in one band Cost-effective solution for large numbers E1: E-Chain® in one band Length of each chain band: 255 mm Can be shortened or lengthened as required through injection-molded, modular chain band Easy snap-open Mounting link for connection of several chain bands Fastening potential by the bore on the chain band Several potential materials Typical industrial sectors and applications General construction machinery Automotive sector Office technology Machine construction Electronic equipment General construction machinery etc. UL94-V2 classification
Request for a quoteSTIL ELEKTRONIK
Turkey
Stil Elektronik combines electroluminescent technology with membrane switch technology and brings it into use in the areas where homogenous lighting is needed, for several industries such as machinery, security, marine electronics, automotive, marketing etc. Electroluminescent technology is technically and visually better than the LED technology and it works properly in all kind of condition and temperature. It has 4 different colors as standard. On the other hand it is possible to brighten the printings by using transparent paints, in case of demand of different colors. There can be various colors on one panel as well one color too.
Request for a quoteWEBER GMBH & CO. KG, KUNSTSTOFFTECHNIK UND FORMENBAU
Germany
From the initial concept to a safe and reliable series delivery, our customers get everything from a single source. They benefit from our decades of experience in manufacturing interiors as well as exteriors for the automotive industry.
Request for a quoteSITEC INDUSTRIETECHNOLOGIE GMBH
Germany
We are specialized in the production of precision parts and assemblies for the medical technology, automotive, telecommunications, metrology and renewable energy industries. We use our own equipment and technologies and undertake in-house fixture construction. Laser machining, electrochemical metalworking and mechanical manufacturing are our core competencies. We manufacture quantities from 50,000 up to several million per year. You will find further information in brochure at our homepage.
Request for a quoteSITEC INDUSTRIETECHNOLOGIE GMBH
Germany
From semi-automated to fully automated - from simple to complex: As a manufacturer of special systems, we are specialized in assembly systems to develop according to customer requirements, so that innovative products can be created. We are industry-neutral, i.e. our systems are used in the most diverse industrial sectors. We have references in automotive, medical technology, e-mobility, renewable energies and aerospace. Here you can find a selection of the implemented assembly system types: - Robot solutions - Interlinked systems - Fully automated lines - Rotary transfer machines - Manual workstations - Hybrid systems An in-house development from our company is the VARIOMODUL®, which allows your system to be quickly adapted to dynamic market changes. Standardized modules, processes, handling technology and peripherals are used. For further information please refer to the corresponding download.
Request for a quotePFEIFFER VACUUM GMBH
Germany
Single-stage rotary vane pumps from Pfeiffer Vacuum have long been some of the most widely used products for processes in the low and medium vacuum range. Their long life and pumping speed, irrespective of the gas used, are the outstanding properties of this pump. Typical applications are found in widely ranging sectors: — Analytics (mass spectrometry, electron microscopy) — Coating technology (surface protection, decorative films, display units, monitor screens) — Vacuum metallurgy (vacuum soldering, vacuum sintering, vacuum alloys, furnace construction) — Leak detection technology (vacuum systems, automotive tanks, airbag cartridges, packaging) — Lighting industry (light bulb manufacture) — Drying industry (vacuum drying, transformer drying)
Request for a quoteTYROLIT - SCHLEIFMITTELWERKE SWAROVSKI AG & CO K.G
Austria
Honing tools from Tyrolit deliver the smoothest surface effects with precision down to the smallest µ-range, essential for industries like cutlery, ski, automotive, watchmaking, and medical technology. These sectors benefit from our extensive range of honing and finishing tools, known for high precision. Tyrolit's dynamic innovation in quality and processes ensures our partners are well-equipped for industry challenges. Best Honing Tools for Various Industries: Our broad assortment offers optimal solutions for any application. In the automotive industry, our products use special polyester film. For superfinishing, the Facetec MF line offers high process stability and cost-effectiveness. The thermal glass industry benefits from our elastic bonded tools for easy metal layer removal. The ski industry uses resinoid-bonded elastic tools to sharpen edges. For precision machining of hip and knee joints, the medical industry relies on our diamond and CBN tools.
Request for a quoteN&H TECHNOLOGY GMBH
Germany
We manufacture customer-specific molded parts made of rubber, silicone and elastomer composite parts in small and large series production according to your sample or drawing. Molded rubber parts are generally characterized by their good formability, chemical resistance, pressure and abrasion resistance and good electrical properties. We advise you in detail on the selection of the suitable material, with a view to the functional description, temperature resistance, chemical requirements, weather influences and resilience. Our molded parts are used in all industries, such as the automotive industry, medical technology, mechanical engineering and electronics industry. We offer customized parts: Protective covers for input devices, Rubber seals and rings, Grommets, flanges, bellows, Form Tubes, Rubber damper, PU molded parts (e.g. wheels and rollers) Combined rubber-metal parts / rubber-plastic parts, etc.
Request for a quoteSCHULZ STANZTECHNIK GMBH
Germany
Stamped parts / contract manufacture Your products delivered punctually As a flexible stamping business, Schulz Stanztechnik manufactures various stamped and stamped bent parts for the most diverse areas of application from conveyance technology components, the automotive industry to mechanical components such as washers and angle connectors or entire assemblies. We place particular emphasis on high-quality and punctual manufacture and delivery of the ordered products and services. We are also in a position to meet special requests of our customers at short notice. Alongside the actual stamping process, Schulz Stanztechnik carries out numerous additional tasks, such as the creation of threads, use of installation parts or the installation of several components to the stamped parts. These activities can be carried out during stamping as well as in a separate work process.
Request for a quotePEEKCHINA CO., LTD.
China
100% unfilled PEEK natural PEEK(Polyetheretherketone)is a kind of heat-resistant, high performance thermoplastic special engineering plastics. It has good mechanical properties and chemical resistance, abrasion resistance, and hydrolysis resistance properties etc.; it has a light proportion and self-lubricating properties.Mechanical and automotive engineering, nuclear and vacuum technology, transport and conveyor technology, textile, packaging and paper processing machinery, electronic and precision engineering, food processing. Key Features Temperature: -40°C up to +260°C. Creep resistant and excellent resistance to high energy radiation. Hydrolysis resistant, even against super-heated steam. Extremely strong and wear resistant plastic. Noise dampening. Highly machinable. MACHINING PEEK
Request for a quoteTYROLIT - SCHLEIFMITTELWERKE SWAROVSKI AG & CO K.G
Austria
In precision grinding, maintaining tight tolerances and perfect surface structures is crucial. The demands in this area have increased, challenging both grinding tool manufacturers and producers. Tyrolit meets these requirements through innovations in precision grinding wheels, distinguished by extensive process know-how and pioneering consulting services. We serve a wide range of industries, including tool manufacturing, automotive, steel, turbine, and medical technology, always adhering to the principle: accuracy is key! Tyrolit offers standardized application technology advice and process support at the highest level. Our expert team, with years of experience, provides constant support. Employees across various countries are closely linked with our headquarters in Austria, ensuring qualified technical support for all precision grinding applications, such as external and internal cylindrical grinding, surface and creep feed grinding, or honing.
Request for a quoteTEPROSA GMBH
Germany
We are specialized in performing thermal shock testing of electronic and mechanical assemblies and have a lot of experience with the requirements of the automotive industry and medical technology. On behalf of our customers, we perform environmental and climatic tests according to customer specifications and applicable standards, thus uncovering optimization potential. We will be happy to advise you with regard to your testing tasks and, together with you, transfer the entire testing process into a specification sheet. OUR OPPORTUNITIES 2-chamber system air-air Test chamber volume up to 130 liters Temperature range hot chamber 50°C to 200°C Temperature range cold chamber -80°C to -100°C Change between chambers <15 seconds Maximum test material weight 25 kg State monitoring of the test specimens during the test
Request for a quoteSCHMIDT ZERSPANUNGSTECHNIK
Germany
SCHMIDT Zerspanungstechnik manufactures machines for many different industry sectors With our high-precision machinery and qualified employees, we fabricate custom machinery and plant equipment individually tailored to the needs of the particular industry. We act as dialogue and development partner for industry in the field of mechanical and plant engineering, and our service portfolio encompasses everything from consultancy and development work and implementing precisely tailored solutions to on-time assembly and installation on site. We design and develop machinery and plant equipment for our customers that need to meet very stringent requirements. SCHMIDT Zerspanungstechnik has a very high degree of vertical integration - something that has resulted in us becoming system partner in many branches of industry. We construct machinery and plant equipment for the following branches of industry: Steel processing Automotive Defence engineering Energy technology
Request for a quoteSAMAG MACHINE TOOLS GMBH
Germany
MULTISPINDLE DEEP DRILLING MACHINES AND SPECIAL DEEP DRILLING AND MILLING CENTRES – TBM roto, TBM flex, TBM mono TBM roto - Machining of rotationally symmetrical workpieces - Used in the automotive industry and medical technology, among others - Customized solutions, automation, handling, workpiece clamping, workpiece cleaning, etc. - Durable machines for parts with maximum precision 24/7 - Optimized accessibility for maintenance and service TBM flex - For individual and series production - Skiving and roller burnishing possible - Machining of forklift forks, telescopic forks, aircraft landing gear parts, special screws, special cylinders TBM mono - Very small drilling diameter with large drilling depth - Crane loading possible - Service and maintenance-optimized accessibility - Short set-up times
Request for a quotePHILPLAST LTD.
Bulgaria
Using the technologies of extrusion blow moulding we create: - Bottles and vials - Jars - Canisters with and without handles - Plastic articles with a slanted neck - Plastic articles with a transparent line for content level control The volume of blow-molded articles can vary from 10 to 2000ml. These products have numerous applications in multiple industries – technology, cosmetics, chemical, automotive, etc. We use a wide variety of plastic materials: PP, PE, PVC, ABS, PS, POM и PA, all sourced from established and reliable suppliers from Germany, Italy, Germany and Great Britain.
Request for a quotePHILPLAST LTD.
Bulgaria
Philplast can produce a wide variety of plastic items using extrusion blow moulding with the following characteristics: Volume: from 10 to 2000ml.; Materials: PP, PE, PVC, ABS, PS, POM, PA and others; Specialty bottles: bottles with a slanted neck, with a transparent line for content level control, high pressure resistant bottles and others; Industries: technology, cosmetics, chemical, automotive and others. We also offer a complete set of services that help in the manufacturing of plastic products and mould maintenance: Design, 3D model and a “Rapid Prototype”; Tooling; Mold servicing and repairs; Additional processing and assembly of plastic articles.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
WALTER STAUFFENBERG GMBH & CO. KG
Germany
▪ Compact and light-weight design for applications such as Pneumatics, Instrumentation and Automotive Technology, Machine Tool Industry, Lubrication and Mechanical Engineering ▪ Available in 4 different sizes and covering all standard metric and imperial diameters between 6 mm and 22 mm / .24 inch and .87 inch
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
▪ Compact and light-weight design for applications such as Pneumatics, Instrumentation and Automotive Technology, Machine Tool Industry, Lubrication and Mechanical Engineering ▪ Available in 4 different sizes and covering all standard metric and imperial diameters between 3,2 mm and 25,4 mm / .13 inch and 1.00 inch
Request for a quoteJINTIAN COPPER
Germany
Main products: TMY copper, T2 / TU2 copper rods, profiled bars, electrical round copper billets Product characteristics: High copper content, low oxygen content, compact structure, uniformity, low electrical resistivity, high electrical conductivity, precise size, excellent mechanical properties; can be customized according to demand Applications: High and low voltage electrical appliances, power electronics, power transmission and transformation, automotive industry, molds, communication technology, cables, machining, metallurgical chemicals, construction industry Production capacity: 100,000 tons Honorary titles: Zhejiang Famous Brand Product
Request for a quoteMKV METALL- UND KUNSTSTOFFVERARBEITUNG GMBH
Germany
Supplementing material properties Whether it’s the automotive industry, medical technology, or machine construction: the demand for material and resource-saving development runs throughout many industries. New, lighter weight materials and new kinds of material combinations offer possible solutions. However, such solutions frequently require a specialized surface coating that balances material properties, technological requirements, and specialized operating conditions to be successful. This balancing act places high demands on system technology, which must ensure these key attributes for ever more complex components in perfectly controlled processes.
Request for a quoteKAWASAKI ROBOTICS GMBH
Germany
The B Series line of body shop robots were developed using Kawasaki's proven advanced technology and extensive automotive experience to take performance to the next level. The robust, yet lightweight slim design achieves the sought after optimization of functionality, flexibility and investment efficiency for maximum spot welding effectiveness and multi-purpose use.
Request for a quoteKAWASAKI ROBOTICS GMBH
Germany
The B Series line of body shop robots were developed using Kawasaki's proven advanced technology and extensive automotive experience to take performance to the next level. The robust, yet lightweight slim design achieves the sought after optimization of functionality, flexibility and investment efficiency for maximum spot welding effectiveness and multi-purpose use.
Request for a quoteKAWASAKI ROBOTICS GMBH
Germany
The B Series line of body shop robots were developed using Kawasaki's proven advanced technology and extensive automotive experience to take performance to the next level. The robust, yet lightweight slim design achieves the sought after optimization of functionality, flexibility and investment efficiency for maximum spot welding effectiveness and multi-purpose use.
Request for a quoteKAWASAKI ROBOTICS GMBH
Germany
The B Series line of body shop robots were developed using Kawasaki's proven advanced technology and extensive automotive experience to take performance to the next level. The robust, yet lightweight slim design achieves the sought after optimization of functionality, flexibility and investment efficiency for maximum spot welding effectiveness and multi-purpose use.
Request for a quoteKAWASAKI ROBOTICS GMBH
Germany
The B Series line of body shop robots were developed using Kawasaki's proven advanced technology and extensive automotive experience to take performance to the next level. The robust, yet lightweight slim design achieves the sought after optimization of functionality, flexibility and investment efficiency for maximum spot welding effectiveness and multi-purpose use.
Request for a quoteKAWASAKI ROBOTICS GMBH
Germany
The B Series line of body shop robots were developed using Kawasaki's proven advanced technology and extensive automotive experience to take performance to the next level. The robust, yet lightweight slim design achieves the sought after optimization of functionality, flexibility and investment efficiency for maximum spot welding effectiveness and multi-purpose use.
Request for a quoteKAWASAKI ROBOTICS GMBH
Germany
The B Series line of body shop robots were developed using Kawasaki's proven advanced technology and extensive automotive experience to take performance to the next level. The robust, yet lightweight slim design achieves the sought after optimization of functionality, flexibility and investment efficiency for maximum spot welding effectiveness and multi-purpose use.
Request for a quoteKAWASAKI ROBOTICS GMBH
Germany
The B Series line of body shop robots were developed using Kawasaki's proven advanced technology and extensive automotive experience to take performance to the next level. The robust, yet lightweight slim design achieves the sought after optimization of functionality, flexibility and investment efficiency for maximum spot welding effectiveness and multi-purpose use.
Request for a quoteResults for
Automotive technologies - Import exportNumber of results
30 ProductsCompany type
Category