Results for
STÄHLE GMBH
Germany
Actuator for precise operation of accelerator pedal in vehicles. External set-point of the scaled pedal position via analog voltage. Fast and simple installation with universal and patented clamping device fixed to the seat rail of the driver seat. Temperature resistant actuator in fail-safe design with de-coupling of the drive by an electro magnetic clutch. Un-powered the pedal can be applied by the human driver. Other interfaces like field bus can be offered. This actuator is also used for vehicle dynamic and unmanned driving tests with the automatzed driving system SPFhybrid !
STÄHLE GMBH
Germany
Actuator for precise operation of accelerator handle of motor cycles and 3-wheeler. External set-point of the scaled pedal position via analog voltage. Simple positioning of stnad to bike - fast and simple attachment to gas handle. Temperature resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation. The system can be expanded by additional actuators for brake and clutch. Other interfaces like field bus can be offered.
STÄHLE GMBH
Germany
Pedal, cable or potentiometer linkage Applications: - Push a pedal (accelerator, clutch, etc.) - pull a cable (e.g. throttle cable) - push a cylinder stick (with adapter) - turn a potentiometer (with adapter) Temperature resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation. It is possible to select the idle position: actuator returned or actuator full engaged. can be configured to have Options such as force measurements and special adapters are available. The system can be linked to the robot shifter SA-RAPID and other products.
STÄHLE GMBH
Germany
Actuator for the actuation of the Engine Start/Stop button in vehicles. Stand-alone controller with buttons for position selection and external selection via potential free contacts. Positions: - Idle position - Ignition On / pre-glow / fuel cell pack power-up - Engine Start / stop Simple set-up with key pad. Temperature resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation which turns the engine off by moving through the engine start/stop position.. The system can be expanded by the actuator SCX for actuation of the ignition key and special mounting devices. A special rocker switch adapter is available for the GM Corvette and similar switches. Other interfaces like field bus can be offered.
STÄHLE GMBH
Germany
Actuator for the ignition key in vehicles. Stand-alone controller with buttons for position selection and external selection via potential free contacts. Positions: - Ignition Off - Ignition On / pre-glow / fuel cell pack power-up - Starter on / Crank Simple set-up with key pad. Temperature resistant actuator in fail-safe design with mechanical, spring-actuated return to ignition off position in power-less situation. The system can be expanded by the actuator SPX for actuation of the engine start / stop button and special mounting devices. Special back pack adapter is available for operation in combination with the full – range column shifter in case of space restriction around the ignition key area.. Other interfaces like field bus can be offered.
STÄHLE GMBH
Germany
Actuator for precise operation of accelerator handle of motor cycles and 3-wheeler. External set-point of the scaled pedal position via analog voltage. Fast, simple and robust installation on driver seat / saddle. Temperature resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation. The system can be expanded by additional actuators for brake and clutch. Other interfaces like field bus can be offered.
STÄHLE GMBH
Germany
Actuator for precise operation of brake pedal in vehicles. External set-point of the scaled pedal position or force via analog voltage. Fast and simple and installation of the unit to seat rail of the driver seat with a universal adapter. Temperature resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation. The system can be expanded by pedal force measurement. Other interfaces like field bus can be offered.
STÄHLE GMBH
Germany
Actuator for precise operation of accelerator pedal in vehicles. External set-point of the scaled pedal position via analog voltage. Fast and simple and installation of the unit to seat rail of the driver seat with a universal adapter. Temperature resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation. The system can be expanded by pedal force measurement. Other interfaces like field bus can be offered.
STÄHLE GMBH
Germany
Actuator for precise operation of accelerator pedal in vehicles. External set-point of the scaled pedal position via analog voltage. Fast and simple and installation by placing the unit to the foot room in front of the driver seat. Temperature resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation. The system can be expanded by pedal force measurement. Other interfaces like field bus can be offered.
STÄHLE GMBH
Germany
Actuator for precise operation of accelerator and brake pedal in vehicles. External set-point of the scaled pedal position or brake force via analog voltages. Fast, simple and robust installation on vehicle driver seat. Temperature resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation. The system can be expanded by additional actuator for and clutch as well as pedal force measurement. Other interfaces like field bus can be offered.
STÄHLE GMBH
Germany
Actuator for precise operation of accelerator pedal in vehicles. External set-point of the scaled pedal position via analog voltage. Fast, simple and robust installation on vehicle driver seat. Temperature resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation. The system can be expanded by additional actuators for brake and clutch as well as pedal force measurement. Other interfaces like field bus can be offered.
SIKO GMBH
Germany
Most compact actuator with high performance for automated positioning jobs Easy mounting, no additional coupling needed. Stainless steel 14 mm hollow shaft, glass fibre reinforced casing. Brushless 24 VDC motor with long service life. Solid absolute sensor, magnetic sensing technology. 2-line LCD for target and position value and operating keys. 2 LEDs for user guidance. Integrated RS485 or CANopen interface. Integrated positioning controller. M8 + M12 component mounting technology.
Request for a quoteSIKO GMBH
Germany
With a maximum nominal torque of 14 Nm, the new AG24 is a real power pack for format adjustment Easy mounting. Stainless steel hollow shafts up to max. Ø 20 mm. “Manual” traveling without control via micro-button. Brushless 160 W, 24 V DC motor with long service life. Integrated absolute position encoder on the output shaft. Integrated positioning controller. Integrated spring-operated brake (option). 2-line LCD for target and position value and operating keys. Integrated Industrial-Ethernet-Fieldbus. M12 component mounting technology. Manual emergency adjustment.
Request for a quoteSIKO GMBH
Germany
Compact dimensions, high power density. Easy mounting and commissioning. High flexibility, high protection category. Stainless steel 20 mm hollow shaft, robust housing. Brushless EC motor with a long service life. Solid absolute sensor, magnetic sensing technology. Integrated power and control electronics. Integrated Industrial-Ethernet-Fieldbus. Integrated positioning controller. M12 component mounting technology.
Request for a quoteSIKO GMBH
Germany
Ultra-compact and powerful actuator with hollow shaft, Industrial Ethernet interface and 5 Nm nominal torque for demanding, fully automated positioning jobs. Small dimensions, high power density. Easy mounting and commissioning. High flexibility, high protection category. Stainless steel 14 mm diam. hollow shaft, robust housing. Brushless EC motor with a long service life. Solid absolute sensor, magnetic sensing technology. Integrated power and control electronics. Integrated Industrial-Ethernet-Fieldbus. Integrated positioning controller. M12 component mounting technology.
Request for a quoteSIKO GMBH
Germany
Compact and powerful actuator for automated positioning jobs Easy mounting, no additional coupling needed. Stainless steel hollow shaft, glass fibre reinforced casing. Brushless 24 VDC motor with long service life. Solid absolute sensor, magnetic sensing technology. 2-line LCD for target and position value and operating keys. 2 LEDs for user guidance. Integrated RS485 or CANopen interface. Integrated positioning controller. M8 + M12 component mounting technology.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Electromagnetic cylinders and actuators for use in applications where compressed air is either not available, too expensive, too slow or for other reasons is not the optimal solution.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SIKO GMBH
Germany
Sturdy and powerful actuator for complex positioning jobs Easy mounting. Through hollow shafts up to max. ø14 mm. Integrated absolute position encoder on the output shaft. Integrated positioning controller. Integrated fieldbus interface (option).
Request for a quoteSIKO GMBH
Germany
High-performance compact actuator for complex positioning jobs Space-saving, easy mounting. Through hollow shafts up to max. ø14 mm. Brushless 50 W, 24 V EC motor with long service life. Integrated power and control electronics with inverse polarity and overload protection. Integrated absolute position encoder on the output shaft. Integrated CANopen or Profibus-DP with M12 component mounting technology. Integrated RS458/SIKONETZ5 interface with M8 component mounting technology. With IO-Link
Request for a quoteSIKO GMBH
Germany
Sturdy and powerful actuator for simple positioning jobs Easy mounting. Through hollow shafts up to max. ø14 mm. Integrated magnetic position encoder on output shaft. Integrated motor control (option).
Request for a quoteSIKO GMBH
Germany
High-performance compact actuator for absolute positioning tasks Easy mounting. Through hollow shafts up to max. ø14 mm possible. Integrated analog absolute position encoder. Electrical connection via cable or connector.
Request for a quoteSIKO GMBH
Germany
High-performance compact actuator for simple positioning tasks Easy mounting. Through hollow shafts up to max. ø14 mm possible. Integrated magnetic position encoder on output shaft. Electrical connection via cable or connector.
Request for a quoteSIKO GMBH
Germany
Sturdy and powerful actuator for absolute positioning jobs Easy mounting. Optional through hollow shafts up to max. Ø 14 mm. Integrated analog absolute position encoder.
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
Modular design, can accommodate modulating and Fail safe option Self contained, only requires electrical power. Fail-safe close, open or fail freeze. ESD option – Logical or hard wired Partial stroke test capability 4-20 mA or 0 -10 VDC input signal optional Full featured LCD display for installation, commissioning and operation SIL 2 & SIL 3 capable to IEC 61508:2010 Available torque range from 25 to 6,00,000 Nm for rotary and 1.2 to 8000 kN force for linear actuator Water tight up to and including IP65,optional IP68 (10m / 96h) EXD explosion proof enclosure Extended diagnostics and functionality over various communication networks Supported communication network includes Modbus ® , Profibus ® , Foundation Fieldbus ® and HART ®Data logging and event record capabilities Optional operating temperature -50 °C to +70 °C Integrated hydraulic system
Request for a quoteHALSTRUP-WALCHER GMBH
Germany
The HIPERDRIVE HDA 70 positioning drive allows adjustment procedures for positioning and auxiliary axes to be performed efficiently, at low cost and with a high degree of precision. The HIPERDRIVE is available with Industrial Ethernet interface for direct connection to a control module. Status massages retrievable via bus. With an durable EC motor.
Request for a quoteHALSTRUP-WALCHER GMBH
Germany
Positioning system with protection class IP 68 for wet area applications in hygienic design The PSW 30x-8 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module.
Request for a quoteHALSTRUP-WALCHER GMBH
Germany
The PSE 21x/23x-8 positioning systems are compact solutions with integrated intelligence that frees up the machine´s central control unit. The intelligent positioning system automatically adjusts auxiliary and positioning axes using a DC-motor, gear, controller, measuring system and CANopen, DeviceNet or Modbus RTU interface. No external motors, proximity or limit switches are required. The absolute measuring system at 64 revolutions (optional) eliminates the need for time-consuming reference runs and increases the efficiency of the machine. The economical motor also makes the system suitable for automation jobs that were previously uneconomic due to the cost. The separated supply voltages for the control and performance electronics provides an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches (optional) simplify start-up, even without the knowledge of the control software.
Request for a quoteHALSTRUP-WALCHER GMBH
Germany
Positioning system with protection class IP 65 for damp area applications The PSS 31x-8 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes with hygienic design. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. Two bus connections are available for looping the bus signal (not for IO-Link). Set-up mode or manual positioning permits the connection of jog keys (optional, not for IO-Link).
Request for a quoteHALSTRUP-WALCHER GMBH
Germany
Positioning system with protection class IP 68 for hygienic applications The PSW 31x/33x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up.
Request for a quoteResults for
Actuators - Import exportNumber of results
334 ProductsCountries
Company type
Category