Results for
FERPLAST SNC
Italy
The HD series lifting platforms are lifting equipment to be installed in a fixed position and are driven by an electro-hydraulic control unit. The double pantograph structure allows a high stroke and reduced overall dimensions (only the minimum height increases). Built according to accident prevention guidelines, they are equipped with a fall protection valve and a safety perimeter. General characteristics: Very robust structure in painted steel Construction according to CE safety standards Upper platform in smooth sheet Aluminum safety perimeter on the upper platform High quality hydraulic power unit, internally positioned, designed for intermittent use of 30% Push-button panel with low voltage controls Hydraulic system with safety valve for overload Control valve for descent speed Oversized hydraulic cylinders with anti-fall valve in case of broken pipes Anti-shearing safety distance between the pantograph arms Joints with self-lubricating bushings
Request for a quoteFERPLAST SNC
Italy
FPHK 285-C - DRUMS TILTER FOR FORKLIFTERS The FPHK 285-C tilter has a fork-mounted structure and is suitable for lifting and emptying metal drums from lt. 200 with diameter mm. 580-600. The device is complete with a band for locking the drum, a frontal safety rod and an angular transmission with a handwheel for rotation. The tilter can also lift plastic drums with edges but only of the type that can be seen in the picture.
Request for a quoteFERPLAST SNC
Italy
PLIERS FOR DRUMS MOD. DL FP 350 The clamp DL 350 for drums used to lift quickly and safely metal drums Lt. 200 and diameter mm. 600 and maximum weight of 350 kg. The pantograph structure for weight effect applied closes blocking with a strong grip on the drum board. The pliers can be attached directly to a crane or you can attach to the forks of a forklift truck using appropriate lifting straps (not supplied). If you use a forklift we recommend pairing with forks hook MKFP 1000.
Request for a quoteFERPLAST SNC
Italy
The HZ series lifting platforms are lifting equipment to be installed in a fixed position and are operated by an electrohydraulic control unit. Manufactured according to the anti-accident guidelines, they consist of two lower and upper planks and a pantograph system operated by a hydraulic cylinder. TECHNICAL FEATURES: Sturdy structure Construction according to CE safety standard Top plate in smooth sheet Aluminum safety perimeter on the top deck European production hydraulic control unit, positioned externally, designed for intermittent use of 30% Pushbutton with low voltage controls Hydraulic system with overload safety valve Control valve for descent speed Over-dimensioned hydraulic cylinder with anticadut valve in case of pipe breakage Safety distance between the arms of the pantograph Self-lubricating sleeves Removable lifting hooks for transport and installation Yellow color RAL 1028 painting
Request for a quoteFERPLAST SNC
Italy
Lifting platform HY 1001 pantograph with low profile. Also included in the price is the access ramp of 1200 mm length, for the discharge and the load by pallet truck. Features: Structure in high thickness sheet steel with high thickness Construction according to European safety standards Electrohydraulic control unit positioned externally Keypad with protection IP 54 positioned on the hydraulic power pack Security perimeter aluminum on the upper platform Hydraulic power unit designed for intermittent use by 30%. Keypad with low voltage controls Hydraulic system with a safety valve for overload Control valve for descent speed Large hydraulic cylinders with valve fall arrest in case of breakage of the pipes Joints with self-lubricating bushings Lifting hooks removable for transportation and installation Mechanical lock for maintenance Painting with yellow RAL 1028 Access ramp length 1200 mm for pallet truck
Request for a quoteFERPLAST SNC
Italy
The lifting platforms HW-C series are lifting equipment to be installed in a fixed position and are driven by a hydraulic power pack. Manufactured according to the accident prevention, they consist of two platforms (upper and lower) and a pantograph system actuated by a hydraulic cylinder. The HW-C series is characterized by the perimeter protection bellows. Main Features: Very strong structure in painted steel Construction according to CE safety standards Upper platform in smooth metal sheet Perimeter protection bellows Hydraulic unit of European production, positioned internally, designed for intermittent use by 30% Keypad with low voltage controls Hydraulic system with a safety valve for overload Control valve for descent speed Large hydraulic cylinders with valve fall arrest in case of breakage of the pipes Antishearing safety distance between the arms of the pantograph Joints with self-lubricating bushings Lifting hooks removable for transportation and installation
Request for a quoteFERPLAST SNC
Italy
Lifting platform single pantograph with U or E profile (FPHU/FPHE 1000) for the insertion of the pallet. On request it is possible to make a modification to the platform transforming the profile from U to E in order to have a central support for the pallet. This variant guarantees the lifting of heavy pallets without risk of flexing. For correct operation of the platform the load must be distributed evenly regardless of the type of profile in use. Features: Structure in high thickness sheet steel Construction according to European safety standards Electrohydraulic control unit externally positioned Keypad with protection IP 54 positioned on the hydraulic power pack Security aluminium perimeter on the upper platform Hydraulic power unit designed for intermittent use by 30%. Hand control with low voltage controls Hydraulic system with a safety valve for overload Control valve for descent speed Large hydraulic cylinders with fall arrest-valve in case of breakage of the pipes
Request for a quoteFERPLAST SNC
Italy
FP SPA 800-DE-1V DOUBLE PANTOGRAPH PLATFORM - ELECTRICAL FEEDING AND ELECTRO-HYDRAULIC LIFTING Double pantograph wheeled lifting platform, completely electric with motorized advancement and lifting. The platform is equipped with: - Driving tiller with feed and lift controls - Two pivoting steering wheels - Two traction wheels - Geared motor for feeding - 24 V electrohydraulic power unit - Chrome cylinder for lifting - 2 long-lasting batteries of 12V / 60Ah each - Single-phase 220 V battery charger supplied
Request for a quoteFERPLAST SNC
Italy
PLATFORM ON WHEELS 800X1600 - LOAD 500 KG The manual lifting trolley is a special model with a large and sturdy structure in sheet steel with reinforced edges. With a lifting height of 900 mm, it transports all types of goods to a comfortable working height. It is equipped with a sturdy pedal pump, which allows effortless lifting of the table.
Request for a quoteFERPLAST SNC
Italy
ALUMINUM LIFT TABLE Aluminum lift table, lightweight and practical with 100 kg capacity and maximum lifting height mm. 755. Folding handle.
Request for a quoteFERPLAST SNC
Italy
Mechanical platform with wheels and single pantographwith actuation by crank. The platform consists of a sturdy steel frame and is equipped with polyurethane wheels with locking brake. The movement ascent and descent takes place through the actuation of a crank with threaded pin which opens and closes the pantograph. Turning the handle clockwise opens the pantograph and the platform is lifted, naturally turning counterclockwise this lowers. (is the system of mechanical cric). The mechanical crank platform is used primarily as a work surface and where you have to make a few lifting because it is slower than the hydraulic models. It 'also suitable for assembly of molds or mechanical components in tight spaces because it does not have the the driving tiller and is not bulky.
Request for a quoteFERPLAST SNC
Italy
INCLINABLE LIFTING PLATFORMS The tilting lifting platform BL series are specially designed to allow operators to fill or empty boxes and containers with maximum comfort, without having to perform repetitive movements harmful to health. The inclination is automatic and maximum lifting height reaches 45°, this greatly facilitates the removal of small parts at the bottom of containers. The lifting is by foot pump and the BL 15 to reach the maximum height takes only 20 pump strokes. The load floor is equipped with a robust containment drawer side.
Request for a quoteFERPLAST SNC
Italy
DOUBLE PANTOGRAPH WHEELED PLATFORMS Double pantograph lifting platforms with pedal pump, 4 wheels, 2 fixed and 2 pivoting, holding brake, chrome handle for pushing, hand lever for the descent at a controlled rate, enamel paint dried in the oven.
Request for a quoteFERPLAST SNC
Italy
BATTERY LIFTER FOR BOXES AND REELS FP PS 04 E - LOAD 400 kg Lifter with manual pushing and lifting with electro-hydraulic pump, allows to lift loads (axis, bags, containers, minipallet, etc.) with maximum weight of 400 kg up to a height of mm. 1510. The elevator FP PS 04 E is compact and easy to handle. Is equipped with polyurethane wheels of large diameter for a high smoothness (two fixed and two steerable complete with brake). It is supplied with loading forks with a length of 650 mm. The battery 12 V-80 Ah. without maintenance, combined with the robust engine and control electronics with overload protection ensures safe and reliable operation. The battery charger is integrated.
Request for a quoteFERPLAST SNC
Italy
Lift height mm. From 1500 to 2000. Robust and reliable. Forklift with manual traverse and battery lifting. Practical and manageable is very useful for lifting loads up to 100 kg or 200 kg depending on the model. Depending of the optional mounted, can be used to lift boxes, handling reels or hooking products to hook "G". The lowering frame allows it to fit under the standards pallets to achieve reels or boxes positioned in the center to the pallet. Supplied with batteries and charger. Available in the following versions: BIG 100/150 capacity 100 kg Lifting height 1500 mm BIG 100/175 capacity 100 kg Lifting height 1750 mm - mast height mm. 2170 BIG 100/200 capacity 100 kg Lifting height 2000 mm BIG 200/150 capacity 200 kg Lifting height 1500 mm BIG 200/175 capacity 200 kg Lifting height 1750 mm - mast height mm. 2170 BIG 200/200 double capacity: 200 kg with lifting height 1500 mm / 100 kg with lifting height 2000 mm
Request for a quoteFERPLAST SNC
Italy
LIFT WINCH STACKER WITH AUTOMATIC CLUTCH MOD. ARG W 181 Practical and functional allows to lift loads of 180 kg up to a maximum of 2450 mm. The exclusive hand winch can lift the load with minimal effort and, through the built-in automatic clutch, you can stop to any point in the ascent lifting. The descent of the load is only possible if the operator acts on the winch and intentionally causes its gradual descent.Equipped with strands of rope fiber core, push handles horizontal system of brake pedal, aluminum and epoxy powder coating oven-dried. Painting RED - BLUE - YELLOW according to availability.
Request for a quoteFERPLAST SNC
Italy
HYDRAULIC DRUMS TILTER MOD. DA-FP 45 for metal or plastic drums. The new drums-tilter mod. DA-FP 45 is equipped with hook and safety band and is suitable for lifting, transporting, emptying both 210 liter metal and plastic drums. Equipped with hydraulic system with pedal or rudder drive, push handles, angular transmission with practical handwheel for drum rotation, hook and safety band to lock the drum, nylon wheels with high smoothness and brake. The lifter can also be used as a stacker for stacking or for positioning the drums on shelves with a maximum height of 1500 mm. The rotation also allows the drum to be placed horizontally at a height of 1650 mm from the ground. RAL 1028 yellow painting. Attention: the drum turner is suitable for handling metal drums or plastic drums with rim (as in the photo). Do not use for different drums.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FERPLAST SNC
Italy
Lift height mm 1500/2000. Stainless steel version. Forklift with manual operation and battery-lifting, with aluminum upright to guarantee lightness and great maneuverability. The frame is made of AISI 304 stainless steel and the thermoformed ABS hood guarantees hygiene and safety in hazardous environments. Practical and handy it is very useful for lifting loads up to 100/200 kg to a height of mm. 1500 or 2000, depending on the model. Depending on the optional mounted, it can be used to lift boxes, moving coils or hook products with "GX hook". The low structure allows it to fit under standard pallets and reach reels or boxes positioned in the center of the pallet. It comes complete with two 12 V/40 Ah batteries.
Request for a quoteFERPLAST SNC
Italy
Manual winch lifter with aluminum frame, 4 models with capacities from 160 to 227 kg, max lifting from 1800 mm to 4200 mm. General features: Compact design; Made of aluminum, lightweight and durable; Access to individual ports; Forks standard steel; Non-marking rear wheels of 20 cm and double front swivelling wheels of 5 cm (only on the standard base and straddle base); Rear swivelling wheels of 12,7 cm. with lateral brakes and fixed front wheels of 10 cm (only on the counterweight base); Easy to load and unload on vehicles for transport; Safety fixing of transportation; Standard winch; Reversible winch to lift heavy loads quickly. Standard features: FPLG-4 maximum height forks at the top 1,80 m - load capacity 227 Kg. FPLG-8 maximum height forks at the top 3,06 m - load capacity 181 Kg. FPLG-10 maximum height forks at the top 3,56 m - load capacity 159 Kg. FPLG-12 maximum height forks at the top 4,20 m - load capacity 159 Kg.
Request for a quoteFERPLAST SNC
Italy
Practical and functional MINI ARG allows to lift loads of 100 kg up to a maximum of 970 mm./ 1180 mm. depending on the model. The exclusive hand winch allows to lift the load with minimum effort and through the automatic clutch incorporated may stop the ascent at any point in lifting.The descent of the load can only occur if the operator acts on the winch and intentionally causes its gradual descent. The trolley ARG load 100 Kg painted is available in: MINI ARG/V lifting height 970 mm rubber wheels MINI ARG/1V lifting height 970 mm - bidirectional rubber wheels - delivery 10 days MINI ARG/2V lift height 1180 mm - large raised rubber wheels MINI ARG/4V lifting height 970 mm - 260 mm diameter pneumatic wheels - delivery 10 days MINI ARG/4V-2 lifting height 970 mm - wheels ANTI DRILLING - delivery 10 days
Request for a quoteFERPLAST SNC
Italy
BATTERY FORKLIFTER FPBINGO 150 N Forklift with manual traverse and lift battery. Available with platform, forks or spike reel holder. Complete with battery charger. The lifter lifting speed without charge is approximately 17 seconds (90 mm/sec.) for the total stroke up to 1500 mm. The product comes with the standard support surface but it can be equipped with other accessories by purchasing them separately.
Request for a quoteFERPLAST SNC
Italy
Hydraulic forklift for lifting and transporting steel drums of 210 lt. The particular shape of the angled front supports allows the loading and unloading on each type of pallet or platform. The hydraulic lifting system coupled to automatic hooking/unhooking and high maneuverability allows a single operator to handle drums in maximum security. The maximum distance between the ground and the bottom of the drum is 500 mm. The FP 450 DT hydraulic drum trolley can be used exclusively for handling welded metal drums, with rim and screw caps Tri Sure, having a diameter of 600 mm with a height of 900 mm and a maximum capacity of 210 liters. The lifter is supplied complete with usage and maintenance manual and regular CE certification.
Request for a quoteFERPLAST SNC
Italy
BATTERY LIFTING TROLLEY MOD. FPE 250 A - MAX. LOAD 250 KG Practical and handy with manual traction and electric lifting, the mod. FPE 250 A allows to lift loads with a maximum weight of 250 kg up to a height of 1800 mm. The small size and limited weight allow it to be used in warehouses, laboratories, offices, kitchens, shops, etc .. The 24 V.-20 Ah battery. maintenance-free, combined with the robust motor and control electronics with overload protection, it ensures safe and reliable operation. The charger is integrated. To guarantee maximum safety, the lifting system is equipped with a fall arrest belt.
Request for a quoteFERPLAST SNC
Italy
SEMI-ELECTRIC LIFTER MOD. FPE 150 A/200 H Manual traction and electric lifting, suitable for lifting loads weighing up to 150/100 kg. up to a height of 1500/2000 mm. Practical and easy to handle with manual traction and electric lifting, the mod. FPE 150 A is able to lift loads with maximum weight of 150 kg to a height of 1500 mm, while mod. FPE 200 H lifts loads up to 100 kg to a maximum height of 2000 mm. The small size and light weight makes it suitable in shops, workshops, offices, kitchens, etc.. The battery 24 V-12 Ah. maintenance free, combined with a robust motor and electronic control with overload protection ensures safe and reliable operation. The battery charger is integrated. To ensure maximum safety, the lifting system is equipped with fall arrester belt.
Request for a quoteFERPLAST SNC
Italy
MANUAL BOXES AND REEL LIFTER FP PS 04 - LOAD 400 kg Compact and easy to handle manual forklift equipped with hydraulic foot pump and large diameter polyurethane wheels for high smoothness (two fixed and two steering complete with brakes). It is supplied with 650 mm long loading forks. The lifting pedal can be positioned vertically to reduce its overall dimensions and the descent is controlled by a valve with handwheel.
Request for a quoteFERPLAST SNC
Italy
MANUAL LIFTER BY WINCH MOD. M 200 Practical and easy to handle allows to lift loads with maximum weight of 150 kg to a height of mm. 1500 mm. The winch with crank allows to lift the load with minimum effort and through the automatic brake can block the ascent at any point of lifting. The descent of the load can only occur if the operator acts on the winch intentionally and causes the gradual descent. Equipped with steel rope, vertical push handles, parking brake on steering wheels, painted steel structure. Are available accessories for lifting and rotation of reels. The product comes with the standard support surface. The cart can be equipped with other accessories by purchasing them separately.
Request for a quoteFERPLAST SNC
Italy
GALVANIZED PALLET BOX FOR GAS CYLINDER STORAGE The galvanized cylinder pallet allows the storage of up to 12 cylinders in a vertical position. It is equipped with lifting hooks with cranes and safety stickers already included. To facilitate the loading of the cylinders there is a folding platform in embossed plate. The cylinders are held in place by a bar that can be lifted and locked using a steel pin.
Request for a quoteFERPLAST SNC
Italy
LF FP800 – TILTER FOR DRUMS SUITABLE FOR FORKLIFT The tilter for drums LF FP800 it has fork mounted structure with elevator cart and is suitable for lifting and emptying 200 liter metal drums with 580-600 mm. diameter. The device is complete with bracket for locking the drum, frontal safety rod and bevel gearbox with handwheel for rotation. More about CE certification The equipment is supplied complete with CE certification and manual of use and maintenance related to the sole subject of the sale. Before using the machine, the customer must check that the elevator cart on which the object will be installed is in compliance with all regulations, including lifting combination and equipment. It is also responsibility of the customer to inform of any special tests that must be performed before use. By purchasing the customer, he/she becomes aware of this information and, where necessary, undertakes to test his/her elevator before using it with the mounted equipment.
Request for a quoteFERPLAST SNC
Italy
MECHANICAL/HYDRAULIC FM LIFTERS FOR FURNITURE Ideal for transporting furniture, safes, containers and machine tools. The FM series mechanical/hydraulic lifter kit for furniture is suitable for moving furniture components in furniture stores, during removals or simply when you need to move furniture safely and without any effort. The maximum load capacity of the pair is 600kg (FM60 mechanical model) and 1800kg (FM180/A - FM 180/B hydraulic models). The kit consists of 2 lifts with lifting plates with non-slip coating and a strap for fixing. Lifting is by means of a screw with crank for the FM 60 model and a practical lever with a hydraulic pump for FM 180. The lifts are equipped with non-marking pivoting rubber wheels with steering lever. RAL 1028 yellow paint for the FM 180 models and blue for the FM 60 model Operation: Position the lifting plates below the part to be lifted, adjust the upper support and tension the safety belt.
Request for a quoteResults for
Lifting%20equipment - Import exportNumber of results
30 ProductsCountries
Company type