Results for
ELAP AUTOMAZIONE INDUSTRIALE
Italy
Stout, easy to install, highly protected against environmental agents: ELAP linear wire potentiometers series HPS are the ideal solution for those industrial applications which require high accuracy and measuring length up to 8 metres. The series HPS, with potentiometer output, is supplied with strokes ranging from 250 to 8000 mm, ±0.25% linearity, 5 KOhm resistance and infinite resolution. The analogue output signals 4-20 mA or 0/10V are also optionally available. The types HPS-S, HPS-M and HPS-L differ for mechanical size and measuring stroke. Series HPS-S: 250, 500, 1000 mm Series HPS-M: 500, 750, 1000, 1250, 1500, 2000, 3000, 4000 mm Series HPS-L: 3000, 4000, 5000, 6000, 8000 mm
Request for a quoteELAP AUTOMAZIONE INDUSTRIALE
Italy
Wire transducers series WDS are composed by the draw-wire mechanics coupled to Elap multiturn absolute high-resolution encoder MEM-BUS or MEM. They can provide different communication protocols – EtherNet/IP, EtherCAT, PROFINET, Profibus, CANopen or SSI output signal. The encoder grants high resolutions values (28 or 29 bit) and strokes ranging from 3000 to 15000 mm. The housing is out of aluminium, whilst the wire consists of coated poliamide stainless steel.
Request for a quoteELAP AUTOMAZIONE INDUSTRIALE
Italy
Wire transducers series WPS are composed by the draw-wire mechanics coupled to Elap multiturn absolute high-resolution encoder MEM-BUS or MEM. They can provide different communication protocols – EtherNet/IP, EtherCAT, PROFINET, Profibus, CANopen or SSI output signal. The encoder grants high resolutions values (28 or 29 bit) and two availble strokes: 2300 or 5000 mm. The housing is out of glass fiber reinforced nylon, whilst the wire consists of coated poliamide stainless steel.
Request for a quoteELAP AUTOMAZIONE INDUSTRIALE
Italy
Stout, easy to install, highly protected against environmental agents: ELAP wire encoders series HLS are the ideal solution for those industrial applications which require high accuracy and measuring length up to 12 metres. The encoder HLS is available with strokes ranging from 1000 to 12000 mm, and resolutions ranging from 0.04 to 1 mm, push-pull or line driver output signal. The types HLS-S, HLS-M and HLS-L differ for mechanical size and measuring stroke. Series HLS-S: 1000 mm – Resolution mm: 0.04 – 0.1 – 0.2 – 0.5 – 1 Series HLS-M: 1000, 2000, 3000, 4000, 5000 – Resolution mm: 0.05 – 0.1 – 0.2 – 0.5 -1 Series HLS-L: 6000, 7000, 8000, 9000,10000, 11000, 12000 mm – Resolution mm: 0.5 – 1
Request for a quoteTECNO IMPIANTI SRL
Italy
Tecno Impianti designs and manufacture a series of horizontal wire drawing bullblocks Mod. MO/P, for the drawing of cold heading wire. These wire drawing bullblocks are utilized for big productions of drawn wire and are meant for wire drawing companies which produce cold heading wire or for big manufacturers of fasteners who execute the wire drawing off-line and take the drawn wire to the cold heading machines, in the form of wire coiled on wire carriers or as bound coils. The horizontal wire drawing bullblocks Mod. MO/P are manufactured by us in 4 different models, for covering a range of wire diameters between 6,0 and 30,0 mm. The drawn wire is taken-up on a rotating platform positioned into a hole in front of the capstan. It is taken-out with wire carriers or through a coil extractor.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TECNO IMPIANTI SRL
Italy
Tecno Impianti has designed and manufactured the new wet wire drawing machine Mod. TS310-2. It is an evolution of the model TI-310, which was one of the most successful products in the history of Tecno Impianti Srl. This machine can be used for drawing of low carbon wire, galvanized wire, welding wire. It is available also in the 4-cones version, named TS310-4. We can supply production lines complete with uncoiler, coppering baths, spooler. Our sales offices is at your disposal for any additional info you might need.
Request for a quoteTECNO IMPIANTI SRL
Italy
Tecno Impianti designs and manufactures straight-line multipass wire drawing machines Mod. TR for the dry wire drawing of thin wires. Our range is composed of machines for processing wire with maximum inlet diameter 6,0 – 6,5 mm., for obtaining wire with minimum diameter 1,80 mm. and machines for processing wire with maximum inlet diameter 3,0 mm., for obtaining wire with minimum diameter 0,80 mm. The take-up of the drawn wire is on reels, or in form of coils of drawn wire.
Request for a quoteTECNO IMPIANTI SRL
Italy
Tecno Impianti manufactures vertical wire drawing bullblocks, which are utilized for drawing wire of small-medium diameter. They are available in two types: Mod. MV e Mod. MVC. In the models MV, which cover a range of wire diameters from 4,0 to 12,0 mm., the drawn wire can be coiled on the wire drawing capstan and then taken-up with a coil extractor, or, after the wire drawing operation, it can be sent to a vertical spooler which spools it on reels. The models MVC, commonly known as vertical inverted bullblocks, cover a range of wire diameters from 5,0 to 9,0 mm. The wire drawn on this type of machine is taken-up on wire carriers positioned under the wire drawing capstan.
Request for a quoteTECNO IMPIANTI SRL
Italy
Tecno Impianti designs and manufacture a series of horizontal wire drawing bullblocks Mod. MO/P, for the drawing of cold heading wire. These wire drawing bullblocks are utilized for big productions of drawn wire and are meant for wire drawing companies which produce cold heading wire or for big manufacturers of fasteners who execute the wire drawing off-line and take the drawn wire to the cold heading machines, in the form of wire coiled on wire carriers or as bound coils. The horizontal wire drawing bullblocks Mod. MO/P are manufactured by us in 4 different models, for covering a range of wire diameters between 6,0 and 30,0 mm. The drawn wire is taken-up on a rotating platform positioned into a hole in front of the capstan. It is taken-out with wire carriers or through a coil extractor.
Request for a quoteTECNO IMPIANTI SRL
Italy
Tecno Impianti designs and manufactures coil compactors Mod. CR which are utilized together with our drawing lines equipped with the wire drawing bullblocks Mod. MO/P. The wire drawn by the bullblocks Mod. MO/P is taken-out of the rotating platform through a coil extractor and positioned on the compactor. The compacted coil will be strapped by means of steel strapping unit and then it will be tilted in a horizontal position for permitting an easy unload by a fork-lift truck.
Request for a quoteTECNO IMPIANTI SRL
Italy
Tecno Impianti has designed and manufactured the new wet wire drawing machine Mod. TS310-2. It is an evolution of the model TI-310, which was one of the most successful products in the history of Tecno Impianti Srl. This machine can be used for drawing of low carbon wire, galvanized wire, welding wire. It is available also in the 4-cones version, named TS310-4. We can supply production lines complete with uncoiler, coppering baths, spooler. Our sales offices is at your disposal for any additional info you might need.
Request for a quoteTECNO IMPIANTI SRL
Italy
Tecno Impianti designs and manufactures straight-line multipass wire drawing machines Mod. TR for the dry wire drawing of thin wires. Our range is composed of machines for processing wire with maximum inlet diameter 6,0 – 6,5 mm., for obtaining wire with minimum diameter 1,80 mm. and machines for processing wire with maximum inlet diameter 3,0 mm., for obtaining wire with minimum diameter 0,80 mm. The take-up of the drawn wire is on reels, or in form of coils of drawn wire.
Request for a quoteTECNO IMPIANTI SRL
Italy
Tecno Impianti manufactures vertical wire drawing bullblocks, which are utilized for drawing wire of small-medium diameter. They are available in two types: Mod. MV e Mod. MVC. In the models MV, which cover a range of wire diameters from 4,0 to 12,0 mm., the drawn wire can be coiled on the wire drawing capstan and then taken-up with a coil extractor, or, after the wire drawing operation, it can be sent to a vertical spooler which spools it on reels. The models MVC, commonly known as vertical inverted bullblocks, cover a range of wire diameters from 5,0 to 9,0 mm. The wire drawn on this type of machine is taken-up on wire carriers positioned under the wire drawing capstan.
Request for a quoteTECNO IMPIANTI SRL
Italy
The in-line wire drawing machine mod. SKP is a horizontal-axis monobloc which is positioned between the uncoiler and the cold heading machine. Its function is to size the wire to the exact wire diameter needed for the cold heading application. The in-line wire drawing machine works in automatic with the cold heading machine. The compensator arm (“dancer”) auto-regulates the drawing speed in function of the demand of wire from the cold heading machine. Why do more and more fasteners manufacturers utilize our in-line wire drawing machines mod. SKP? Cost saving, because rod or semi-finished wire are utilized instead of drawn wire. Reduced inventory, because in some cases from the same wire size it is possible to obtain different drawn wire sizes. Improved metal formability, because the wire gets drawn just before entering into the cold heading machine. The wire is warm, so it is easier to form. Age-hardening problem is eliminated. Diameter control, because with an in-line wire...
Request for a quoteResults for
Drawing - Import exportNumber of results
15 ProductsCountries
Company type