Adhesive label applicators - Import export

DFP-WR is a series of semi-automatic distributors of adhesive labels on rolls, completely made of steel, easy to use, versatile for any type of label you normally use. Available in widths up to 100 mm. or 200 mm. The holder can be adapted to any core can accept rolls up to 300 mm. diameter, thus offering long autonomy.The labels are read by two sensors that self-learning by the microprocessor automatically identify the difference in transparency between the label and the backing paper, presenting the label on the peeler, almost completely detached. Withdrawing the label, the next pop-up automatically. The control board also allows you to stop the rotation of the motor when coil is finished, or in case of paper breaking. It sign the anomaly with a sound signal. There is an electromechanical sensor for transparent labels and a preset counter for the regressive or progressive counting of the labels. The use of the battery version allows to work for about 4 hours without power supply.

The labels are read by two sensors that, self-learning by the microprocessor, automatically identify the difference in transparency between the label and the backing paper, presenting the label on the peeler almost completely detached. Withdrawing the label the next pop-up automatically. The control board also allows to stop the rotation of the motor coil is completed, or in case of breakage paper signaling the anomaly with a sound signal.

The label is inserted by the operator under the shaft which is located in front of the gluing cylinder which, with its continuous rotation, drag and applies a thin film of glue, handing the operator already ready to be applied. A special device allows the micrometric regulation of the glue, allowing a perfect gluing and the maximum cleanliness of the label. The EME gluing machines are made of stainless steel and brass, while the tray of glue is in ABS antacid. All parts in contact with the glue are interlocking and can be disassembled easily without any tools, making it quick and easy cleaning. USABLE GLUE: The gluing machines use a sticky compound consisting of powdered dextrin diluted in water. 400 grams of dextrin must be mixed with 600 ml of water. This is vegetable glue derived from potato starch.

D-FPWR BOTTLES - SEMI-AUTOMATIC LABELING MACHINES FOR ROUND PRODUCTS Semi-automatic applicator for rolls of self-adhesive labels with maximum width mm 200/300 on bottles and cylindrical products with a diameter of mm 20 to mm 130 Main features: - Sturdy construction in steel and aluminum - Motorization of the product rotation roller and the drawing of the labels by means of stepper motors with variable speed and electronically synchronized - Microprocessor management electronics with storage of 40 working formats - Possibility to apply a wraparound label or front/back label and also with a different size with adjustment of the distance between the two programs - Maximum label width mm 200/300, and maximum coil diameter 300 mm - Change of format extremely simple and fast

FP RWR is a series of reel-winders of self-adhesive labels in rolls built for industrial use, robust, completely made of steel, equipped with a large support base for a stable connection to the printer. Available in versions with a maximum width of 130 mm. or 230 mm. The expansion mandrel allows the use of internal cores from 40 to 110 mm. (76 mm for the BIG model) and rewind reels up to an external diameter of 300 mm (400 mm for the BIG model). An innovative dancer position detection system allows to perfectly follow the speed of the printer avoiding tears or continuous stops. It is possible to rewind in a clockwise or counter-clockwise direction and select the maximum speed range to be reached. Powered at 230V or on request 115V, it does not require a separate power supply. The microprocessor control board also allows to stop the rotation of the motor when the reel is finished or in case of paper breakage, signaling the anomaly with an audible signal.

Pure Latex Water Based Adhesive is ideal for solution appliers with rolls. The PURE LATEX is a water based adhesive of natural rubber's latex used for assembly of lining, cover with leather and various process of Juntery. CHARACTERISTICS : Viscosity 200+/-50 Cps USING INSTRUCTIONS : Mix very well the adhesive. Apply an homogeneous coat upon the two parts has to be stickked, wait for the evaporation of the water and then press the two parts. APPLICATION : By spray, by rull or by brush ATTENTION : With temperature near to 0°C the product freezes and can no more be used. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 20 - Kg 10 Kg 5 - Kg 1

The ECO-AUTOMASTIK is a NATURAL RUBBER ADHESIVE used on the general processing of JUNTERY. Adapt for who wants to apply the glue only on a part. It is called ECO because the company uses only raw materials with law environmental impact. CHARACTERISTICS : Viscosity : 5500 - 6000 cPs Colour : Amber USING INSTRUCTIONS : Apply an homogeneous coat upon one of the two parts has to be sticked, way for the evaporation of the solvents and then stick the two parts. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGING : Kg 800 - Kg 200 - Kg 40 - Kg 13 - Kg 8 Kg 3,5 - Kg 1

One Side Adhesive for LEATHER'S PRODUCERS The NEOPRENE ONE WAY is a plychloroprene adhesive adapt for LEATHER'S PRODUCERS and GIUNETRIA in particular in the case where you want apply the glue only in a side. Used for the construction of insoles in shoes too. It has high viscosity. High bond strength. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 30 - 60 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon one of the two parts has to be sticked, let it dries for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGING : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1 .

Rubber Soles Bicomponent Adhesive The NEOPRENE ATT is a plychloroprene bicomponent adhesive with high crystallization used for RUBBER SOLES for application of NATURAL RUBBERS.High bond strenght. It is also used for general processing of the shoe. It must be used with a 5% of ACTIVATOR. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 15 - 30 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be stickked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. After the mix between the glue and the activator , the glue has a life of 2 hours more or less. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1

Transparent Adhesive for inner Soles - Footwear Adhesives The NEOPRENE 3S is a plychloroprene transparent adhesive with strong grip , medium opend time uesd for sticking sides of the inner soles. Thanks to its peculiar transparency is especially used for leather goods or by leather company. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 15 - 45 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be sticked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGING : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1

Leather Sole Adhesive The NEOPRENE 1 is a plychloroprene adhesive with high crystallization used for cold sticking of LEATHER SOLES, for the assembly of the GUARDOLO and for the to pair LEATHER-LEATHER and LEATHER-TUNITH. High bond strenght. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 15 - 30 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be stickked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1

The NEOPRENE 14 SPRAYING is a plychloroprene adhesive used for processing on the division of forniture, sticking of wood - textile and expanded polyurethan. Used for bonding expandeds and quits with difficult materials. Spray on both sides. COLOURS : Black, Pink, Grey and Neutral. CHARACTERISTICS : Viscosity : 700 +/- 100 cPs Opened Time : 15 - 20 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be stickked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1.

Practical and pocket-sized. The GEL, denser and more viscous, ensures even stronger and more durable bonding. Perfect for vertical surfaces. It ensures excellent performance totally safety. You can use till the last drop! Ideal for bonding rubber, metal, ceramic, wood, leather, cardboard an various types of plastic except PE, PP, PTFE.