Impulse heat sealer - Import export

Impulse manual bag sealers machines FPS series are the simplest and most economical series of sealers machines. The model FPS-C is equipped with a cutter for trimming the envelope. This system allows you to pack products with different lengths and then performing the trimming of the bag, leaving no protruding edges and unsightly. This model is only available in sizes 300 and 400 mm. The sealers FPS/FPS-C are suited to a medium-low production and allow the closing of plastic bags without folding, with maximum thickness of 0.15 mm (0.30 mm total). The sealing is by impulse (the resistance heats for a few seconds) and can be adjusted by timer. The sealing cycle is generally 3 seconds and is indicated by an indicator light. These sealers has a sealing width of 2 mm.

Impulse sealers MG 621 series, with 620 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. The MG 621 series sealing machines are available with mechanical or motorized closing bars with 3 or 5 mm sealing thickness depending on the model. Also available in stainless steel with mechanical closure of the bars and and 3 mm sealing.

Impulse heat sealer for closing and coding plastic tubes of variable height, from 105 mm to 220 mm, with diameter up to 50 mm (60 mm with optional). Simple and compact with electromagnetic operation and innovative temperature control that constantly monitors, cycle after cycle, the real sealing temperature. CE certified. The TUBO3 heat sealer for tubes can seal tubes starting from 20 mm in diameter and 105 mm high. On request it is possible to make a special tube holder for tubes with a diameter of 20 mm and a height of 70 mm. However, it is not possible to seal tubes with a diameter of less than 20 mm and a height of less than 70 mm.

Semiautomatic impulse heat sealers for the bench, for closing PE, PP, PVC and light coupled bags. Equipped with timer, pedal and trimmer. They can be used for: food products, in the automotive, cosmetics, electronics, mechanical and plastic parts, packaging for e-commerce, pellets and agriculture and for chemical products. Available in 460mm and 610mm welding lengths, and 4mm high. Suitable for bags of different thickness, with moist or dusty contents. Double sealing bar with separate regulation of temperatures and times. Manual and semi-automatic operation with electromagnetic closure. Adjustment of the welding power by means of a 6-position switch. Activation by electric pedal or automatic cycle button with digital control of the welding parameters. Digital timer with LCD, for precise control of welding (0-10 sec.) And cooling (0-20 sec.) Times. Can be combined with dosing systems.

Semiautomatic table top version or with pedestal sealing machine with electrical pedal and double sealing impulse bar, (resistance to heat for a few seconds), suitable for closing envelopes polyethylene, polypropylene, PVC, coupled in aluminum, etc. The closing of the sealing bars by pressing the electric pedal with solenoid allows the operator to have both hands free. The timers for adjusting the sealing and cooling ensure maximum reliability of each type of material. Simple to use, requires no preheating. The double sealing bar (above and below) and the sealing of 5 mm. allows the closing of envelopes with thick, laminated bags and bellows. Through a selector switch, you can choose whether to use one or two sealing bars. Maximum solderable thickness 0.25 mm. (0.50 mm. overall). It's also available the model ME 6010 FDA / FDV with 600 mm sealing bars and 10 mm welding.

ME-ASD SERIES with 10 mm DOUBLE SEALING BAR BY IMPULSE WITH TEMPERATURE CONTROL Semiautomatic bench sealing machine with electric pedal and double impulse sealing bar with temperature control, (an electronic circuit prevents overheating and allows continuous operation), suitable for closing polyethylene, polypropylene, PVC, aluminum coupled bags, etc. The sealing bars are closed by means of an electromagnet with foot control. Timers for sealing and cooling control ensure maximum reliability on all types of material. The "cold closing" time allows the bars to remain closed for a time set by the operator and apply a pressure that reinforces the sealing. The ME ASD series sealers can in some cases be used for sealing advertising banners and creating pockets for fixing them.

MG 421 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 421 series with 420 mm sealing bar and suitable for sealing polyethylene pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. They can be equipped with special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized closing of the bars. The MG 421 series sealing machines are available with bars with mechanical or motorized closure with a sealing thickness of 3 or 5 mm depending on the model. There are also special models in stainless steel and with 2 parallel welds of 3 mm.

The ME-FD double Impulse sealers with pedestal incorporate twin elements (top and bottom) for heavy-duty applications and can accommodate up to 0.5mm material. Makes a 5 mm wide seal and fuses the material from both sides. Ideal for sealing large heavy bags. Also equipped with slide switch to select single side sealing or double sides sealing. By having a foot control, the hands are free to feed the machine. Units come complete with pedestal, stand, adjustable working plan and adjustable foot control. The sealing time is adjustable with a timer and is indicated by a light. Easy and simple to operate. No pre-heating required. Maximum seal thickness 0,25 mm. (0,50 mm total).

ME SERIES HI - single bar 5 mm. (suitable for medium thick envelopes in PE, polypropylene, coupled light) Welders Series ME HI 5 mm with closure lever, allowing the sealing of heat sealable plastic bags with thickness up to 0.40 mm total. The models ME HC 5 mm are equipped with cutter for trimming of the envelope. This system allows you to pack products with different lengths and then performing the trimming of the bag, leaving no protruding edges and unsightly. The sealers ME HC are available in sizes 300, 400 and 500 mm. This series of sealers makes a sealing of 5 mm, very beautiful and suitable for food bags or if you want a more valid and robust sealing than the standard 2 mm. This sealers have a impulse sealing (resistance heats for a few seconds) and a timer for adjusting the sealing time. The sealing cycle is indicated by an indicator light. With manual sealing bar, sealing width 5 mm., Maximum thickness of 0.20 mm weldable. (mm. 0.40 total).

PNEUMATIC SEALER CP 500 Electropneumatic sealer with double sealing impulse bar with (the resistance heat for a few seconds) suitable for closing packaging polyethylene, PVC and polypropylene, coupled aluminum, etc. It has four positions of voltage to the sealing bar, timer for adjusting the welding time and timer for the cooling time. The double sealing bar (top and bottom) welded from 3 mm allows the closing of envelopes very thick, laminated bags and bellows. The closing of the bars takes place by a pneumatic cylinder unit with pressure and pedal control. Maximum thickness weldable 0.25 mm. The CP 500 can be easily oriented from 0 to 90 degrees.

Semiautomatic table top sealer with electric pedal and impulse sealing bar (resistance is heated for a few seconds), suitable for closing bags of plastic material heat-sealable. The closing of the sealing bars by pressing the pedal electric with solenoid allows the operator to have both hands free and for increased production, just select the automatic cycle with timed closure. The timers for adjusting the welding and cooling ensure maximum reliability of each type of material. Simple to use, requires no preheating. Maximum thickness. weldable 0.20 mm. (0.40 mm. Overall)

Machine suitable for the closing of bags with height, mm. to 150 mm. 270 and max weight. 3 kg. The welding system with belts PTFE allows for closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc. The temperature is adjustable from 0-250° C. and the feed speed is adjustable from 0 -12 mt. / min.The welding head is adjustable in height and the distance between the welding and the edge of the bag is 10 mm. The machine is equipped with rotary solid ink marker and interchangeable characters (up to 20 characters with a height of 5 mm.), The system works with inked rollers for easy management and is complete with a photocell to do the marking in the desired location. This model is constructed in the standard version, that is, the advancement of the product occurs from right to left.

ME-FDE SEALERS WITH DOUBLE MOTORIZED PULSE SEALING BAR AND TEMPERATURE CONTROL The new bench sealers with double impulse sealing bar and temperature control, allow the optimal sealing of any type of envelopes and sealable bags. The high pressure exerted by the motorized descent of the bars (0.7 Kg./cm2) allows perfect sealing even on very thick materials. The double active motorized sealing bar (heats above and below) and the 5 mm sealing they allow the closure of envelopes with high thickness, laminated and envelopes with bellows. In addition to sealing polyethylene, polypropylene, coupled paper, aluminum, pvc and medical bags, it also allows the sealing of advertising banners. To seal the banners, we recommend sending samples, without obligation, to carry out the sealing tests. Maximum sealable thickness 0.20 mm (0.40 tot). Timers for regulating the sealing and cooling temperature ensure maximum reliability on all types of material.

CF SERIES - CONSTANT TEMPERATURE HEAT SEALERS WITH PEDESTAL AND FOOT PEDAL ( for multi-layer bags) THE CF SERIES of constant heat sealers with pedestal and operated by foot pedal, are ideal for sealing bags made of compunds, multi-layer films, co-extruded films, OPP, heat-sealable cellophane. It is not suitable for polyethylene films. Being operated by foot pedal, the hands are free to feed the machine. The sealing jaws of the type "hot bar" are equipped with resistance and temperature controller for controlling the temperature from 30 ° C to 200 ° C. The temperature of the sealing jaws is adjustable according to the type and thickness of the material to be sealed, and is kept constant by a heat thermo-regulator. The maximum sealable thickness, that always varies according to the type of sealable material, is 0.25 mm. (50 mm. total). Also available in CFN version with timer and acoustic signal at the end of sealing.