Light applications - Import export

Worldwide: known, used and admired across the globe! The HUMMEL® is powerful, efficient and reliable. With its optimal dust extraction you are able to work almost dust free. The sophisticated and durable technology for perfect sanding along with its enormous performance quality make the HUMMEL® the undisputed number one machine for sanding wooden floors. It has been convincing craftsmen all over the world for over half a century. It is simultaneously powerful and easy to operate and maintain. Both changing the sanding belt and dismantling the machine are extremely simple. The HUMMEL® can be ordered with or without the powerful LED work light. Applications with the HUMMEL®: The HUMMEL® belt sander is mainly used for sanding wooden floors. It enables precise and economical sanding of both small and large surfaces.

The RESISTOMAT® model 2320 is a universally applicable and easy to operate measurement device for low-ohmic resistances. The light and handy device in a stable IP54 plastic housing with membrane keypad is likewise suitable for use in service, laboratory or on the production floor. The power supply is done via built-in rechargeable battery packs or by standard batteries. If need be, the temperature of samples can be measured and the sample resistance is subsequently compensated to fit the value at 20°C. This applies for samples with resistances depending on the sample’s temperature. The temperature coefficients for copper and aluminium are included as standard. A third and fourth coefficient may be set individually for any given material to be measured. Features: — Measuring ranges from 40 mΩ to 4 kΩ — Resolution up to 10 μΩ — Measuring accuracy 0.05 % Rdg. — Autorange — Temperature compensation — Bipolar measurement — Input voltage protection up to 415 Vrms

Light duty castors and wheels are mainly used for less demanding applications requiring a load capacity of up to 280 kg. They are designed for speeds of up to 3 km/h and therefore more frequently used indoors.Typical applications of light duty castors are medical equipment, display bases or equipment for large-scale catering establishments.

The UV measuring probes with 14 mm diameter only serve as compact, long-term, stable measuring heads for the supervision of UV irradiation systems and for UV measurements in inaccessible locations. In addition, optional water and light guide adapters enable the application in hot locations and in water disinfection systems. The integrated electronics generate a signal voltage that is transferred to the UV monitor RM-31 or to the PLC with low noise by a shielded cable.

Zoller + Fröhlich has developed the Z+F PROFILER® 9012 and the Z+F PROFILER® 9020 laser scanners for mobile mapping applications, which can be flexibly integrated into the mobile mapping systems of almost all MMS providers. Railway applications on vehicle (train, etc.) and trolley platform Light space applications, for the inventory of tunnel tubes (railway and road), vegetation, signs and safety corridors Road applications (MMS) for road maintenance, traffic infrastructure detection, and general object acquisition Because of the high data capture rate, Z+F laser scanners operate accurately even from mobile platforms, at speeds of up to 120 km/h (approx. 75mph).

ACURIA is the most precise machine light we have ever built as a machine light professional. With the most powerful, efficient lighting technology. With the best tightness. The safest protection against high temperatures. The best cable protection and the easiest installation. The simplest control and the most seamless integration. More precisely thought, more precisely shaped, more precisely built. A perfect combination of Waldmann know-how for industrial lighting and application-oriented design language by renowned product designer Dominic Schindler. Light source: LED LED service life:> 60,000 h (L70) Beam angle: 90° Glare control: Focusing optic array UGR rating: ≤ 22 Colour temperature: 5,000 K (neutral white) Colour rendering Ra: ≥ 80 Connection: M12 connector plug, A-coded, rotatable 360°, 6 x 60° snap-in Connection voltage: 24 V DC Protection class: III Activation: Digital inputs for on/off and step dimming Housing/exterior material: Colourless anodised aluminiu

ACURIA is the most precise machine light we have ever built as a machine light professional. With the most powerful, efficient lighting technology. With the best tightness. The safest protection against high temperatures. The best cable protection and the easiest installation. The simplest control and the most seamless integration. More precisely thought, more precisely shaped, more precisely built. A perfect combination of Waldmann know-how for industrial lighting and application-oriented design language by renowned product designer Dominic Schindler. Light source: LED LED service life: > 60,000 h (L70) Beam angle: 90° Glare control: Focusing optic array UGR rating: ≤ 22 Colour temperature: 5,000 K (neutral white) Colour rendering Ra: ≥ 80 Connection: M12 connector plug, A-coded, rotatable 360°, 6 x 60° snap-in Connection voltage: 24 V DC Protection class: III Activation: Digital inputs for on/off and step dimming Housing/exterior material: Colourless anodised aluminium L

Smooth high speed rotation and low vibration enables precision grinding. Stepless speed change from 0 to 56,500 rpm meets a wide range of grinding applications. Compact & light weight for comfortable operation over long periods of time. Triangular grip fits operator's hand. Special plastic grip prevents cold hands and absorbs vibration. Rear exhaust system.

Compact spindle with synchronous motor for micron machining with speed up to 45,000 rpm. Due to the bearing arrangement the PRECISE SG100-45-2-P-HE25 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with synchronous motor for micron machining with speed up to 20,000 rpm. Due to the bearing arrangement the PRECISE SD61104 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with synchronous motor for micron machining with speed up to 20,000 rpm. Due to the bearing arrangement the PRECISE SD60124 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with synchronous motor for micron machining with speed up to 36,000 rpm. Due to the bearing arrangement the PRECISE SD50124 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with synchronous motor for micron machining with speed up to 50,000 rpm. Due to the bearing arrangement the PRECISE SD4060 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with synchronous motor for micron machining with speed up to 65,000 rpm. Due to the bearing arrangement the PRECISE SD3164 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with synchronous motor for micron machining with speed up to 60,000 rpm. Due to the bearing arrangement the PRECISE SD3063 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with aynchronous motor for micron machining with speed up to 20,000 rpm. Due to the bearing arrangement the PRECISE SC60124 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with asynchronous motor for micron machining with speed up to 30,000 rpm. Due to the bearing arrangement the PRECISE SC50124 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with asynchronous motor for micron machining with speed up to 50,000 rpm. Due to the bearing arrangement the PRECISE SC4084 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with asynchronous motor for micron machining with speed up to 50,000 rpm. Due to the bearing arrangement the PRECISE SC4064 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with asynchronous motor for micron machining with speed up to 50,000 rpm. Due to the bearing arrangement the SC 4060 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with asynchronous motor for micron machining with speed up to 65,000 rpm. Due to the bearing arrangement the PRECISE SC3164 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted.

Compact spindle with asynchronous motor for micron machining with speed up to 60,000 rpm. Due to the bearing arrangement the PRECISE SC3162 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact motor spindle for micron machining with speed up to 60,000 rpm. Due to the bearing arrangement the PRECISE SC3163 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with asynchronous motor for micron machining with speed up to 60,000 rpm. Due to the bearing arrangement the PRECISE SC3061 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with asynchronous motor for micron machining with speed up to 60,000 rpm. Due to the bearing arrangement the PRECISE SC3060 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact motor spindle for micron machining with speed up to 80,000 rpm. Due to the bearing arrangement the PRECISE SC2063 can be used for light milling and drilling application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact motor spindle for micron machining with speed up to 160,000 rpm. Due to the bearing arrangement the PRECISE SC1060 OA can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with asynchronous motor for micron machining with speed up to 60,000 rpm. Due to the bearing arrangement the PRECISE SC1053 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with asynchronous motor for micron machining with speed up to 15,000 rpm. Due to the bearing arrangement the PRECISE ESC4094-MAC can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted.