Round die - Import export

CF disc finishing systems with Siemens touch panel for setting and storing all main process parameters.

Round aluminum wire to create the equipotential bonding of the mounting rails.

Round belt catalog

• For gripping and bending • With long round jaws • Serrated inside jaws • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• Strong design • With long round jaws • Serrated inside jaws • With lap-joint and strong handles • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• For gripping and bending • With long round jaws • Serrated inside jaws • Handles coated with plastic • Made of tool steel, forged, oil-hardened

The cylinders described here are pneumatic drive units mainly for linear movement. The piston rods or the magnetic traction transfer the movement of the piston to the components to be moved. We offer round, short-stroke, compact, profiled barrel cylinders and piston rod-free drives. In addition you will find here a whole range of sensors, fastening parts and accessories. Our piston rod cylinders are fabricated according to various ISO standards and are available in single-acting or double-acting design. They are suitable for filtered, unoiled or oiled compressed air.

The cylinders described here are pneumatic drive units mainly for linear movement. The piston rods or the magnetic traction transfer the movement of the piston to the components to be moved. We offer round, short-stroke, compact, profiled barrel cylinders and piston rod-free drives. In addition you will find here a whole range of sensors, fastening parts and accessories. Our piston rod cylinders are fabricated according to various ISO standards and are available in single-acting or double-acting design. They are suitable for filtered, unoiled or oiled compressed air.

DryLin® R - Installation videos System selection & service life calculation DryLin® R - Introduction and technical information Special info on DryLin® R linear plain bearing L1 series drylin® igus® test method Liners and pressfit bearings Open and enclosed DryLin® R liners Linear Bearings Open, enclosed, split and self-aligning DryLin® R linear plain bearing Housing bearing Enclosed linear bearing, adjustable, split, in tandem design and as floating bearing DryLin® R housing bearing Flange housing Linear bearing with round or angular flange DryLin® R flange housing Carriage and linear housing Open or enclosed in several long designs DryLin® R carriage and linear housing Shaft end supports and shaft blocks Fixed and moving shaft end supports, shaft blocks in several designs DryLin® R shaft end supports and shaft blocks Shafts and supported shafts Shafts made of aluminum, steel and carbon fiber DryLin® shafts and supported shafts Linear round guide DryLin® R linear plain bearings are based on extremely wear-resistant polymers specially developed for the linear technology. The dimensions are compatible with standard ball bearings. The special geometry guarantees ruggedness even in extreme environments. DryLin® R - Installation videos Advantages: 100 % lubricant-free Dimensionally interchangeable with (recirculating) ball bearings Large variety of choice in housing shapes Shafts, shaft blocks and accessories available from stock 8 different shaft materials Replaceable liners VA stainless steel housing available When not to use it? When little installation space is available drylin® N drylin® W When twist-protection is required for single-axis systems DryLin® T DryLin® N Liners and pressfit bearings Open and enclosed DryLin® R liners Linear Bearings Open, enclosed, split and self-aligning DryLin® R linear plain bearing Housing bearing Enclosed linear bearing, adjustable, split, in tandem design and as floating bearing DryLin® R housing bearing Flange housing Linear bearing with round or angular flange DryLin® R flange housing Carriage and linear housing Open or enclosed in several long designs DryLin® R carriage and linear housing Shaft end supports and shaft blocks Fixed and moving shaft end supports, shaft blocks in several designs DryLin® R shaft end supports and shaft blocks Shafts and supported shafts Shafts made of aluminum, steel and carbon fiber DryLin® shafts and supported shafts

rounded corners

rounded corners

Round ring

Siegling Round belts are used for conveying in the textile, wood-working, ceramic, packaging and chemical industries.Siegling Transilon round belts serve as efficient drive elements in both precision tool and machinery manufacturing. Siegling Round belts have also proven their reliability as drive elements for live roller conveyor repeatedly. Their great flexibility and elasticity make any turn possible.

The housing of the 2008Q floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 8 installation devices. The sockets have a VDE mark. With internal tube for using the tank with the lid closed. Further equipment variants on request.

The housing, the lid and the frame of the floor box 2003B are made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be covered with your own floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 3 installation devices. The sockets are VDE certified. Further equipment variants on request.

Round floor socket 7501A with screw lid. Single box made of solid PVC, gray, heavy duty, to be set at floor level. Solid aluminum upper part anodized in natural aluminum. Waterproof when closed. The lid can be completely removed and can be locked with a special key. Further equipment variants on request.

Endless extruded round belts Our endless extruded round belts are ideal for low power requirements. They are elastic power transmission elements that do not need cost-intensive tensioning devices. In view of the special production process, they do not have any welding seams or terminal connections and run very smoothly. Moreover, they allow a minimum pulley diameter starting from 5.5 x belt diameter. Our types E80, V75, C70 and P82 are made of specially selected and dynamically tough materials. In addition, type E80 also is antistatic to a limited extent and has a resistance value of about 106 Ohm; thus, it is excellent for use in electronic devices and chip production. Available diameters: 1.8mm - 7mm Available lengths: 40mm – 1,610mm Temperature resistance: -20°C - +160°C Coefficient of friction: 0.35µ - 0.9µ* Maximum tension: >100N

Round floor socket 7702A with screw cap made of aluminum with 2 slots. The floor socket is made of solid, gray PVC and can be used both outdoors and indoors. When closed, it is waterproof. The floor socket is opened and closed with a special key. Further equipment variants on request.

Discover the versatility of circular formwork for the construction of circular concrete walls with or without clamping points. With this innovative circular formwork for concrete for radii from 3 m, you can efficiently realise construction projects such as biogas plants, silos, tunnel entrances, storage basins, sewage treatment plants, adventure pools, towers or stairwells.

Round bottom bags are the perfect packaging for poultry, bread or sanitary items. Thanks to the rounded corners, no unsightly corners will appear after the packaging process. The bag will adapt perfectly to its content. All round bottom bags are available as wicketed bags for automatic packaging, as well as loose. We would be pleased to give you advice about our round bottom bags. We look forward to your inquiry by mail or by phone: +49 (0)9181/2960-0!

Discover the versatility of circular formwork for the construction of circular concrete walls with or without clamping points. With this innovative circular formwork for concrete for radii from 3 m, you can efficiently realise construction projects such as biogas plants, silos, tunnel entrances, storage basins, sewage treatment plants, adventure pools, towers or stairwells.

Round CEE floor tank 7022A with lockable lid made of saltwater-resistant aluminum. The CEE floor tank is installed at floor level and can be driven on by car due to its solid construction. Waterproof when closed. Protection class IP 67. Standard surface in natural anodized aluminum. Further configurations and colors on request.

Our endless turned round belts are wound either out of one homogeneous strand or one cord and spliced endlessly without thickening. For special applications, it is possible to vulcanize the inner splice or to make a special splice based on our in-house engineering methods. This increases the tensile strength by up to 60%. In elastic types, the core is welded. In view of their special structure, twisted round belts exhibit very quiet running properties, are extremely flexible and, thus, make possible very small minimum pulley diameters of 3x belt diameter. For several types, speed up to 70,000 rpm is possible; however, the speed of 60m/s should not be exceeded. Elastic types: PU, Vulkollan Semi-elastic types: PA.6, Set-Polyester, Nylon, HE Types with limited extensibility: Polyester, Nomex, Nomex-PTFE, Polyester-PTFE, Kevlar/Twaron, PA.6 anti-static, PBO

Round hook belts are the ideal solution for power transmission or conveying systems where several belts run on one shaft. Since they are easy to install, downtimes and maintenance costs can be reduced significantly. The hook belts only have to be inserted. Then the belt is joined to the hook and the second side of the hook is closed with pliers. Thus, there is no time-consuming and cost-intensive assembly work.

Hollow core belts for nipple connections when quick and easy installation is needed. Standard stock program: 75° Sh.A red, smooth 80° Sh.A sky-blue, smooth, FDA 85° Sh.A green, smooth Available diameters: 4.8mm - 15mm Available lengths: starting from 110mm Available hardness: 75° Sh.A – 85° Sh.D Temperature resistance: -30°C - +70°C Coefficient of friction: 0.3µ - 0.7µ

We have a complete range of polyurethane round belts for conveying and power transmission applications. PU round belts, extruded in open lengths, are homogeneous round profiles that can be welded for use as high-quality power transmission and conveying elements. Our stock mainly comprises solid profiles with a smooth or slightly roughened surface and hollow profiles for nipple connections. Several types have FDA/USDA approval and comply with EU Directive 2007/19/EC. Although we generally produce in open lengths, we can also produce all belts according to your specifications. Our round belts convey a wide range of products such as foodstuffs, glass, roof tiles, PC boards and many more. The standard range of round belts is rounded off with aramid, polyester or glass-fiber reinforcements. If an appropriate quantity is purchased, we also produce special types with PES or aramid reinforcements.

Product name: Round lid Article number: 262 Shape: round Closure system: sliding lid Material: PP Dimensions: Ø 98,00mm x 12,00mm Possible decoration: IML-label Units per box: 1.540 pcs. Units per pallet: 24.640 pcs. Fitting combination article: 275ml container round 402

1000 ml

Round ring, welded