Plastic panels - Import export

The accessories of panel.

Vacuum suction systems with special plates for rough surfaces such as stone slabs, plastic panels, wooden panels, wood based boards and much more up to 6000 kg.

Design-oriented, one-sided brochure rack with heavy metal base for holding brochures in A3 landscape format or A4, A5 and 1/3 A4 portrait format (depending on version). The brochures are held in the front area by crystal-clear plastic panels, which allow an unobstructed view on the leaflets. The 4 brochure compartments are arranged one above the other on the anthracite-colored metal back of the floor-standing rack and each is 40 mm deep. Each compartment front (color: aluminium silver) has a writable area measuring 200 x 90 mm (W x H) or 420 x 90 mm (W x H). Here is space for your individual lettering. The scope of delivery also includes a self-adhesive label "Info".

In those areas where employees meet each other or where sales staff and customers are standing together, special hygiene regulations must be observed in the current situation. The "Construct" partition wall is ideal for protecting employees and customers. The silver anodised aluminium square tube provides the basis for setting up the plastic panel. It is crystal clear and, with a size of 1000 mm width and 800 mm height, offers exactly the right hygiene protection for separating the breathing areas of at least one person standing. For transport, the partition wall can be divided in height. The spitting protection wall has a total height of 2000 mm and offers optimal application possibilities, for example at cash registers or service counters. Adjoining workplaces can thus be easily separated from each other, while room brightness and atmosphere are only slightly affected. Documents or goods can be pushed through under the separating pane.

We have already designed and built an array of different spray protection systems for indoor and outdoor use at industrial plants on behalf of our customers. These traditionally consist of a loadbearing system made of weatherresistant GRP profiles and transparent, weatherresistant plastic panels. The spray protection system has already been enhanced with e.g. fastener frames for electric distributors, pipe supports, GRP cable bushing systems, GRP doors and ports and special openings for sample extraction. As the GRP spray protection systems for outdoor use are also exposed to high wind loads, we are happy to provide auditable static analysis from an independent structural engineering firm to confirm their stability.

The sneeze guard "Alba" is delivered to you in three parts made of clear plastic. Simply insert the panel into the two matching feet. The sneeze guard is quickly assembled ready for use and can be stowed away flat when not in use.Use the "Alba" protective screen in the checkout area or on service counters. Create a protective barrier between customers and staff with unrestricted personal contact. In the lower area of the sneeze guard, use a hatch in the screen to pass change or documents through. The opening of the window varies with the selected size:60.0605.6 - 300 x 150 mm (width x height) 60.0605.7 - 300 x 150 mm (width x height) 60.0605.8 - 200 x 150 mm (width x height)

The GESIPA® TRI-FOLD® blind rivet forms three press lashes on the closing head side during setting. The advantages The large moulded lashes distribute the exerted clamping force evenly and gently onto the riveted material. Also, the large surface of the lashes offer excellent protection against the rivet being pulled through very soft, porous or brittle application parts. Thanks to its special design, the TRI-FOLD® is also able to compensate over-dimensional or irregular drill hole diameters. Application areas TRI-FOLD® blind rivets are excellently suited for the automotive field, e.g. for plastic panelling, car body parts and for the interior work inside vehicles, but also for all other applications that are particularly soft, brittle, easily deformed or porous.

Plastic display panel for A4 information sheets. Or use in SHERPA® and VARIO® display panel systems. • Polypropylene display panel for use in SHERPA® and VARIO display panel systems • For information materials in A4 format, e.g. price lists, catalogue pages, etc. • Insertion of paper from the top • With fully circumferential, coloured profile frame • Low-reflection film suitable for scanners • Can be retrofitted with tabs (product # 5603 and 5609) • 5-year warranty

Magnetic Name Badge is a commonly used magnetic product. It is composed of magnets and plastic or metal panels. It is widely used in office environment, hotels, teahouses and other service personnel. The magnetic chest is small and beautiful in appearance, easy to wear and durable

Economic and high performance punching machine for high volume production FRIMO's EcoCut punching machine is ideally suited for trimming very complex and large plastic components such as instrument panels, door panels and armrests. Its high capacity makes it the optimal choice for large-scale production. The EcoCut has been specifically developed for trimming towards the ram and in many additional punching directions. The product fixture is integrated directly into the lower table. The vertically driven upper tool replaces the press ram.

for universal protection of building sites, continuous support tube, with welded plate for mounting in the base plate, film red / white attached on both sides, reflec- ting, film area protected by outer edge, socket 60 mm x 60 mm or 40 x 40 mm

These films serve for the temporary surface protection from the damage caused by processing, transport and installation - for example as thermal laminating or paint protection or as carrier films in the production of adhesive protective films. Typical examples of application are painted steel sheets and plastic panels. Our protective films are characterised by optimal thickness tolerances, low amount of specks and machine processing. Due to the exact coordination of the film with the surface requiring protection and the exact compliance with the lamination parameters we are able to provide our customers with the individually defined adhesive values for every application.

These films serve for the temporary surface protection from the damage caused by processing, transport and installation - for example as thermal laminating or paint protection or as carrier films in the production of adhesive protective films. Typical examples of application are painted steel sheets and plastic panels. Our protective films are characterised by optimal thickness tolerances, low amount of specks and machine processing. Due to the exact coordination of the film with the surface requiring protection and the exact compliance with the lamination parameters we are able to provide our customers with the individually defined adhesive values for every application.

Screw conveyors primarily comprise a U-shaped trough and the worm shaft with blades. They are primarily used for internal transportation of bulk goods (filter cake, pellets, wood). Our standard screw conveyors are manufactured with pedestal bearings and gland seals. The construction forms for material transport can be selected with a pitch of between 0° and 90°. The construction length can be varied depending on requirements. The materials for the screw conveyors can be supplied in normal steel and wear-resistant steel; plastic panels are also possible.

AERO Pleat Z APZ model panel filters with plastic or card board frame are a new generation environmentally friendly coarse filters, with 100%incinerable materials. Filters are made up of self supporting synthetic media in G3, G4 and F5 grades. Frames usually are plastic or card board.It contains no metal parts and hence free from corrosion too. It is an ideal choice to use as a prefilter in air handling units.

MARCO Decor is the manufacturer of plastic molding,3D wall panels,photo frames,baseboards and mirrors. Our company is a trusted name in the plastic molding industry, known for delivering high-quality products to clients across diverse sectors. Our commitment to precision, innovation, and customer satisfaction positions us as the ideal partner for your upcoming shop project. 2) Advantages of cooperation with us: -reliability and loyal conditions of cooperation -the possibility of manufacturing products taking into account the wishes of the client -different payment options -fast delivery -95% of positions are always in stock.

MARCO Decor is the manufacturer of plastic molding,3D wall panels,photo frames,baseboards and mirrors. Our company is a trusted name in the plastic molding industry, known for delivering high-quality products to clients across diverse sectors. Our commitment to precision, innovation, and customer satisfaction positions us as the ideal partner for your upcoming shop project. Advantages of cooperation with us: -reliability and loyal conditions of cooperation -the possibility of manufacturing products taking into account the wishes of the client -different payment options -fast delivery -95% of positions are always in stock Collaborative Design Process: as the largest producer of plastic molding,we can guarantee a wide range of colors and types of molding. Thanks to this, we are able to supply orders continuously.