Convention - Import export

Side-gusseted bags have got a considerably larger filling volume than conventional bags. Due to its appealing design, the content of the side-gusseted bags can be better appreciated. We would be pleased to give you advice about our side-gusseted bags. We look forward to your inquiry by mail or by phone: +49 (0)9181/2960-0!

High Temperature Grease (05/20/2021) High temperature multi-purpose grease Description Castrol High Temperature Grease is a high-performance lithium complex grease that is characterized by its excellent high-pressure properties. It contains a high-quality base oil based on mineral oil, to which corrosion protection inhibitors and antioxidants are added in a balanced ratio. The high resilience and good wear protection of Castrol High Temperature Grease goes far beyond the standard of conventional lubricating greases. These good properties result from the effectiveness of the innovative additive package developed specifically for Castrol High Temperature Grease . By smoothing the surface roughness on the friction surfaces , their load share increases . This creates increased safety with regard to the load capacity of the bearings with reduced friction.

The modular, preassembled PERO N2 units are available at short notice for your specific application Thanks to its highly efficient process technology and low energy consumption, the N2 offers excellent cleaning results and high throughput. Operators can choos from a range of solvents in order to achieve best cleaning results for their specific tasks. The energy manager function enables operators to control the heating output for maximum energy efficiency. Cleaning with hydrocarbons or modified alcohols with a flash point > 55°C; halogenated hydrocarbons; other solvents on request Standardised and strong High efficiency High throughput combined with ourstanding cleaning quality Available as 1 and 2bath unit with loading of the unit via Manual charging unit Automatic charging unit Hall trolley

The R4 from PERO is able to clean large quantities of parts as well as large workpieces in a hgihly efficient manner with short cycle times. With its high cleaning capacity, the R4 meets the needs of companies in the automotive and aerospace industries, as well as those forming plants, heat treatment specialists and contract cleaners. Thanks to customised parts carriers and logistics concepts, the R4 offers reliable degreasing and cleaning results for emobility suppliers. Cleaning with hydrocarbons or modified alcohols with a flash point > 55°C; halogenated hydrocarbons; other solvents on request Available as UNIVERSAL unit Suitable for 1/2 EURO wire mesh boxes Suitable for largesize workpieces Efficient cleaning to high cleanliness standard Available as 1 and 2bath unit with loading of the unit via Hall trolley Pallet truck Automatic charging unit

The modular, preassembled PERO R2 units are available at short notice for your specific application Thanks to its unique design and optimised process technology, the R2 offers maximum throughput rates and excellent cleaning quality. At the same time, the unit is know for its energy efficiency. The performance of the R2 is primary determined by the size of the parts carrier and the cycle time per batch. As the R2 is available with chambers of various size, it is probably the most flexible cleaning unit in its class Cleaning with hydrocarbons or modified alcohols with a flash point > 55°C; halogenated hydrocarbons; other solvents on request Available as UNIVERSAL unit 660 x 480 x 300 mm (std.) 1.000 x 480 x 300 (B chamber) 1.340 x 480 x 300 mm (D chamber) High flexibility Maximum throughput Unrivalled cleaning quality Available as 1 and 2bath unit with loading of the unit via Manual charging unit Automatic charging unit Hall trolley

Scope of application: -Horizontal and vertical installation – suitable for both vertical and horizontal CNC-controlled milling machines -Lateral installation is also possible Product features: -Extreme accuracy for your machining -The TC vice is ground and polished on all sides -Clamping force can be preset in 11 increments – fine gradations for delicate workpieces. At most, one revolution is required to reach the max. clamping force -Preselectable and reproducible clamping forces enable the workpiece position to be repeated within a tolerance of less than 0.01 mm

Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines Product features: -Extreme accuracy for your machining -Clamping force can be preset in 4 to 11 increments. At most, 2 revolutions are required to reach the max. clamping force -Preselectable and reproducible clamping forces enable the workpiece position to be repeated within a tolerance of less than 0.01 mm Important: -LC 90: drive head with finer clamping force preselection for sensitive workpieces (11 increments)

Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines Product features: -Extreme accuracy for your machining Clamping force can be preset in 4 to 11 increments. At most, 2 revolutions are required to reach the max. clamping force -Preselectable and reproducible clamping forces enable the workpiece position to be repeated within a tolerance of less than 0.01 mm

Scope of application: -Horizontal installation -Suitable for conventional clamping and for gripper clamping or a combination of both -The support jaws enable a wide range of unmachined parts from flame-cut and sawn materials through to complex castings to be clamped securely and economically. Suitable for materials Product features: -Clamping range adjustment for clamping two workpieces of different sizes -Reproducible clamping forces enable excellent repeating accuracy of the workpiece position -Mechanical power-transfer device -Fully enclosed and maintenance-free high-pressure spindle – high chip protection, minimum cleaning requirements, constant clamping forces up to 40 kN -Use with a torque wrench – max. 40 Nm

Scope of application: -Horizontal & vertical use - therefore suitable for vertical & horizontal CNC milling machines -Conventional clamping, grip clamping and low tension clapping possible -Titanium 2 K - ideal for use on 5-axis machining centers -Clamping of raw, thermal & saw cut parts by penetrating hardened & interchangeable grip elements into the work piece -The support jaws safely & cost effectively allow raw part, different types of materials & complex geometries to be handled Product features: -To monitor & optimize milling processes -Safety for people & machines -High flexibility - the modular clamping system combines almost all possibilities of our tried & tested models -Titanium 2 M - finely polished sides so that all sides can be used -Titanium 2 K and M can be vertically used -Force translated high-pressure spindle. -Increased power stroke for safe clamping of raw parts -Loss of 8 mm clamping edge in low tension, 3 mm with GRIPP

Scope of application: -Horizontal & vertical use - therefore suitable for vertical & horizontal CNC milling machines -Conventional clamping, grip clamping & low tension clapping possible -Titanium 2 K - ideal for use on 5-axis machining centers -Clamping of raw, thermal & saw cut parts by penetrating hardened and interchangeable grip elements into the work piece -The support jaws safely and cost effectively allow raw part, different types of materials & complex geometries to be handled Product features: -To monitor & optimize milling processes -Safety for people & machines -High flexibility - the modular clamping system combines almost all possibilities of our tried and tested models -Titanium 2 M - finely polished sides so that all sides can be used -Titanium 2 K & M can be vertically used -Force translated high-pressure spindle. -Increased power stroke for safe clamping of raw parts -Loss of 8 mm clamping edge in low tension, 3 mm with GRIPP

Scope of application: -Horizontal and vertical use - therefore suitable for vertical and horizontal CNC milling machines -Conventional clamping, grip clamping and low tension clapping possible -Titanium 2 K - ideal for use on 5-axis machining centers -Clamping of raw, thermal and saw cut parts by penetrating hardened and interchangeable grip elements into the work piece -The support jaws safely and cost effectively allow raw part, different types of materials and complex geometries to be handled Product features: -To monitor and optimize milling processes -Safety for people and machines -High flexibility - the modular clamping system combines almost all possibilities of our tried and tested models -Titanium 2 M - finely polished sides so that all sides can be used -Titanium 2 K and M can be vertically used -Increased power stroke for safe clamping of raw parts Loss of 8 mm clamping edge in low tension, 3 mm with GRIPP

Scope of application: -For horizontal & vertical usage-suitable for CNC controlled milling machines & large machining centres -Clamping unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece -With the support jaws, unmachined parts in highly varied materials, or with complex geometries, can be clamped securely -Gripper studs suitable for materials with a strength of up toapprox. 1000N/mm² Product features: -High versatility – the modular clamping system combines practically all the possibilities of our tried-and-tested models -Fully compatible with the accessories of the LC/TC 160 series, for example gripper studs, universal gripper set & pull down sets -Grounded sides so that all sides can be used High-pressure spindle with mech. force amplifier for the safe clamping of raw parts in combination with gripping & pull down spring function -Lost clamping margin 8 mm with pull-down, 3 mm with GRIPPER

Scope of application: -Can be applied horizontally or vertically – therefore suitable for vertical and horizontal CNC milling machines -Conventional clamping, gripper clamping or pull-down clamping are all possible -Clamping unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece -With the support jaws, unmachined parts in highly varied materials, or with complex geometries, can be clamped securely and economically. Product features: -High versatility – the modular clamping system combines practically all the possibilities of our tried-and-tested model -High-pressure spindle with power intensification. -Enlarged clamping span for secure clamping of unmachined parts -Lost clamping margin 8 mm with pull-down, 3 mm with GRIPPER -Clamping near to neutral axes -Clamping jaws of forerunner are compatible -Clamping range of the middle fixed jaw groove: Max clamping width -176 mm