Results for
RHEIN-CHEMOTECHNIK GMBH
Germany
Proved, versatile release agent for moulds of wood, coated boards, steel and plastic. Sticks excellent on moulds, easy and clean mould release, for high-quality surface finish.
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Proved, versatile release agent for moulds of wood, coated boards, steel and plastic. Sticks excellent on moulds, easy and clean mould release, for high-quality surface finish.
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® 410 is a liquid, alkaline mould cleaning agent for the removal of burnt rubber and plastic residues from metallic surfaces. It is also used as a paint stripper. WIWOX® 410 is used undiluted for immersion cleaning of metal moulds. The construction material for the tank can be sheet steel or stainless steel. The tank size depends on the moulds to be cleaned. The pool can be heated from the outside or inside by a heating coil. The processing temperature is generally approx. 80° C. The processing time depends on the degree of soiling and the type of soiling between 10 – 30 minutes.
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Heavy-duty release agent with excellent adhesion on vertical moulds, e.g. for precast garages. Very good adhesion on vertical moulds, excellent demoulding, results in clean, uniform and almost flawless fair-faced concrete, economical in use.
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Proven special release agents for the production of concrete products by wet-cast process using either PE, PU or silicone moulds. Fast and easy release of concrete products from the mould, results in clean, uniform and almost flawless surfaces.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
WIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® CORUS HD ultrasonic systems have been specially designed for cleaning high-quality moulds and precision tools. In maintenance these replace the labour-intensive and often ineffective manual cleaning. The ultrasonic cleaning process can be used for all metal moulds, in particular tools for injection moulding, extrusion, rubber processing as well as aluminium and gravity die casting. A typical structure consists of three stages: 1. cleaning, 2. rinsing and 3. passivating. The usable dimensions are matched to common mould sizes. The workpieces to be washed are placed in the tank either with the aid of a washing basket or with a lifting beam. Our ErgoStation is recommended for manual rinsing, drying and post-treatment. The working area is completely enclosed, brightly illuminated and ventilated. Operation is safe and simple, as the moulded parts are loaded laterally through a sliding door and held by a lifting device during treatment.
Request for a quoteRHODIUS ABRASIVES GMBH
Germany
Steel cup brush with crimped steel wire on a 6 mm shank, for use on straight grinders. With high maximum permitted revolutions. • For flexible working • For careful cleaning • Moulded in plastic for up to 10 times longer lifetime.
RHODIUS ABRASIVES GMBH
Germany
Steel cup brush with crimped steel wire on a 6 mm shank, for use on straight grinders. With high maximum permitted revolutions. • For flexible working • For careful cleaning • Moulded in plastic for up to 10 times longer lifetime.
RHODIUS ABRASIVES GMBH
Germany
Steel wheel brush with crimped steel wire on a 6 mm shank, for use on straight grinders. With high maximum permitted revolutions. • High max. revolutions • For careful cleaning • Moulded in plastic for up to 10 times longer lifetime.
RHODIUS ABRASIVES GMBH
Germany
Steel wheel brush with crimped steel wire on a 6 mm shank, for use on straight grinders. With high maximum permitted revolutions. • High max. revolutions • For careful cleaning • Moulded in plastic for up to 10 times longer lifetime.
HEXPOL TPE GMBH
Germany
We are successfully helping to convert a rapidly growing plastics waste stream into new life plastic products with our Dryflex TPE compounds based on Post Consumer Waste. The thermoplastic elastomer materials were developed to address demands in the automotive industry, which is obliged to use increasing quantities of post consumer waste and operate under the EU ELV Directive to ensure recyclability at the end of each vehicle’s life. The materials contain a high volume of post consumer waste from 33% to 80% by weight. Recyclate consists of polypropylene drawn from automotive mouldings, which are cleaned and re-ground and rubber tyre crumb from both OEM and after market tyres. Apart from the obvious benefit of recycling, the material exhibits other advantages when compared with virgin materials particularly its superior Ultra Violet, and weathering resistance and sound reduction properties. Applications Automotive interior & exterior trim Mudflaps Underbody stonechip protectors An
Request for a quoteGROCHOWZKI AND PARTNERS
Germany
Origin : Germany Size 4.5cm-5.0cm, 5.0cm-5.5cm, 5.5cm-6.0cm, 6.5cm and up Varieties Pure white garlic(Super white garlic) Normal white garlic(red garlic/purple garlic) Supplying period All year round Supply capacity yearly 100,000 MTS Exporting standard and quality No root, clean, no black mould ,not broken,No splits on the skin, no internal germination growth, no insects or fungous stuff. Weight/Conveyance 29 tons/40’'reefer container. (package: mesh bag) 26 tons/40'’reefer container. (Inner packing,3pcs/net bag, outer packing:10/kg carton) 27 tons/40'’reefer container. (Inner packing: in bulk, outer packing:10kg /carton) 13 tons/20'’reefer container. (Mesh Bag Packing) 11 tons/20'’reefer container. (Carton Packing) MOQ 1 Ton Whatsapp : +4915211483881 E-Mail: grochowzkiandpartners at mail dot com
Request for a quoteResults for
Mould cleaning - Import exportNumber of results
13 ProductsCountries
Company type