Working process - Import export

Logistics software solutions to optimise your work process The software house of Lödige Industries LogIT GmbH, the software house of Lödige Industries, has 30 years of experience in data processing and host systems in the field of logistics. Based on standardized software modules, we develop solutions tailored to the specific projects of our customers. Experience, practical knowledge and competent handling are guaranteed by specialists in data and information processing. Storage management, material flow and transport technique, data base applications are implemented in state of the art logistics software. LogIT GmbH realizes and optimizes business processes within the logistic chain, from primary production to recycling. Our products include: Manual consignment solutions for distribution centers (MAN-Log) Truck dock management (TRUCK-Log) Air cargo systems (Cargo Professional)

Roller die Roller die for the roller process of round work pieces with or without starting slope. These dies can be given flexible texts from individual insert milling or wire-cut excavations. The selection of materials depends on the relevant use. During production, we are guided by your drawings or data.

The semicontinuous TFi3000 for industrial use is not a compromise, but rather the combination of the benefits of two entirely different systems! It permits smoke, heat and cold treatments in a single production step. Automated work processes lower your operating costs while at the same time increasing production capacities. Efficient combination of Ti3000 & IKi3000 Production justintime, controllable and reproducible work processes Much lower germ formation and contamination – for longer durability Automatic transport system Producing, packaging and delivery in a very short time Lesser demand of cold storage capacities Higher trolley capacity as comparable floor conveyor systems by low construction

This inline thermocouple is especially invented for using under humid conditions. Compared with normal wire production this wire isolation is made in one work process, both conductors get moulded in Teflon at the same time. With this wire the measurement equipment is protected from capillary rising moisture through the wire. gas-, steam- and watertight Temperature range: -75°C to +250 °C, short-duration to + 300 °C Wire type: Teflon,0.38 mm, solid, Tmax: +300 °C

The TFi3000 Autovent is a true efficiencywonder! The patented procedure for lowpressure steam cooking without any fans at all, in combination with automated work processes, reduces the operating costs to a minimum. Cooling of the products in the closed system, directly subsequent to heat treatment, also ensures ideal hygiene conditions and increases durability. Production justintime, controllable process with reproducible work processes Automatic transport system Much lower germ formation and contamination – for longer durability Short cooking times and weight loss reduced by up to 15% Temperature difference across the system no more than 1 °C Uniform products at maximum quality due to turbulences and air velocities up to 200 m/s Very low maintenance and operation costs thanks to dispensing with fans Long service lives due to stainless steel construction and steamtight welding allround

Resource-saving, sustainable and future-oriented. In addition to a well-working recycling process, a functioning circular economy also requires extensive possibilities for using the recycled material. The use of mechanically recycled post-consumer recycled material is not yet feasible in the food industry at the present time and is prohibited by law. Outside the food industry, however, there are already various areas of application. Your desired article geometry can be developed individually.

The smart solution: Fully-automatic defatting machine ASD 460 enables removal of fat layers from loins and cutlets in predefined strengths. Advantages Fully-automatic recognition of the fat strength using Weber camera technology, with programmable controlled movementalong longitudinal profile Continuous work process Sensor-controlled electronic spring for perfect pressure application Uniform fat layers Considerable minimisation of reworking (trimming) Back bacon instead of small trimming cuts Clearly improved product image for cooking after slicing Product-specific blade holders Combinable with pre-installed derinder Options: Special Weber transport rollers Product-specific blade holders Product-specific pressure devices for products withand without bones Fixed or adjustable guide plates for supply and output belts

Stamped parts / contract manufacture Your products delivered punctually As a flexible stamping business, Schulz Stanztechnik manufactures various stamped and stamped bent parts for the most diverse areas of application from conveyance technology components, the automotive industry to mechanical components such as washers and angle connectors or entire assemblies. We place particular emphasis on high-quality and punctual manufacture and delivery of the ordered products and services. We are also in a position to meet special requests of our customers at short notice. Alongside the actual stamping process, Schulz Stanztechnik carries out numerous additional tasks, such as the creation of threads, use of installation parts or the installation of several components to the stamped parts. These activities can be carried out during stamping as well as in a separate work process.

Incremental, miniature design, analog interface 1 V SS Profile LS100: Repeat accuracy max. ±1 μm Output circuit sin/cos 1 V SS Signal period 1000 μm (analog) Real-time signal processing Works with MB100/1 magnetic tape

Repeat accuracy max. ±1 μm. Output circuit sin/cos 1 VSS. Signal period 1000 μm (analog). Real-time signal processing. Works with MB100/1 magnetic tape.

Features • Low effort and rapid processing • Especially for working with injection mortar cartridges • Ergonomic, non-slip handle • Sturdy, metal design • High quality alternative to the Profi model • Transmission ratio up to 1:18 Description & Area of Application • Guidance of the feed rod: The plastic in the core guarantees smooth gliding • Feed Plate: 2 thin metal layers with a plastic interlayer for problem-free dosing of the injection mortar • Riveted frame: Sufficient robustness to meet normal requirements • For the use of injection mortar with coaxial cartridges.

Dynamic Spur Gearboxes MS-Graessner produces customer-specific spur gearboxes of a helical or straight-toothed design. The design of the toothing is carried out using KISSsoft and our own design and calculation programs. In addition to the provision of technical support and advice to our customers, we also take over the entire engineering process. By working closely together with our customers, we guarantee the development and production of the optimum drive solution in each case. Advantages: economical production simple mechanical movement and power transmission high level of efficiency high running smoothness high axial and radial loads low circumferential backlash broad range of applications long service life

The Planetary Gearbox for Power and Precision Full power with the highest levels of precision. The PlanetGear has the necessary power reserves available for the most challenging power transmission requirements. Advantages: compact design high level of efficiency high torsional rigidity low mass moment of inertia torque high overload capacity high dynamics large transmission ratios MS-Graessner offers innovative, customised gearbox solutions in a helical or straight-toothed design. The design of the toothing is carried out using KISSsoft and our own design and calculation programs. In addition to the provision of technical support and advice to our customers, we also take over the entire engineering process. By working closely together with our customers, we guarantee the development and production of the optimum drive solution in each case.

TEPROSA GmbH has specialized for many years in the manufacture of sophisticated, precisely fitting laminated cores of exceptionally high quality. In the field of electrical steel sheet, we manufacture individual laminations and sheets for stators and rotors, as well as entire sheet packages stator- or rotor packages) from various steel grades. We process grain oriented electrical steel for generators, transformers and other electrical machinery. Our most common method for packaging the individual laminations is baked enamel technology. Alternatives are welding or bolting of laminations. As a long-standing supplier to various OEMs, the quality of our work is particularly important to us. Therefore, we work according to uniform processes and thus ensure consistent quality and complete traceability of each individual production step.

The directly driven dividing apparatus of the TA3 series are excellent suited for the exact positioning of workpieces or, due to the high speeds, also for round machining of workpieces. The direct drive is absolutely backlash-free and ensures highest dynamics. All dividing apparatus are equipped with an automatic, pneumatically actuated clamping system. The dividing apparatus TA3G180 can be optionally equipped with an automatic hydrodehn clamping system (hydraulic expansion technology). Field of applications Rotation axis for angle positioning of work piece carriers in: Processing centers CNC - grinding machines Tool machines Laser processing machines, etc.

Floor marking tapes: Ideal for marking walkways and footpaths In industrial halls and warehouses, clear marking of walkways and driveways is not only important for smooth work processes. Safety and danger zones must also be clearly recognizable as part of occupational safety. Hazardous areas, parking spaces and aisles can be easily and quickly marked with DURABLE floor marking tapes. Depending on the area, a single- or two-color marking tape can be selected; different RAL tones enable use as warning marking tape, for example. The ideal complement: DURAFRAME® SECURITY two-color info frames in safety colors for warnings and notices on walls and doors. Registered safety signs additionally convey important rules of conduct for accident prevention.

SCHMIDT Zerspanungstechnik has already become many customers' system partner of choice We provide complete mechanical engineering solutions: Whether you want to modify or upgrade existing systems, optimise manufacturing processes or automate your production: Our expertise in mechanical engineering enables us to come up with the ideal solution for you. We support you throughout the entire production process - even as your system partner if you wish: We listen to your ideas; we draw, design, engineer, build and even surface finish the new product that is destined to go into service as a machine, jig or tool at your site. We have clear organisational structures and work processes: Our qualified staff, who not only have many years of experience, but also undergo continuous training to ensure that they are always up to date, ensure that everything runs smoothly.

We provide complete mechanical engineering solutions: Whether you want to modify or upgrade existing systems, optimise manufacturing processes or automate your production: Our expertise in mechanical engineering enables us to come up with the ideal solution for you. We support you throughout the entire production process - even as your system partner if you wish: We listen to your ideas; we draw, design, engineer, build and even surface finish the new product that is destined to go into service as a machine, jig or tool at your site. We have clear organisational structures and work processes: Our qualified staff, who not only have many years of experience, but also undergo continuous training to ensure that they are always up to date, ensure that everything runs smoothly. We have a high degree of vertical integration and manufacture everything under one roof – that's also the reason we can react quickly and flexibly to any change requests you may have.

Optimise your production process by automating the supply of your laser system. With our flexibly configurable and scalable robot systems, your jobs will be done quickly and accurately. Fully automated process operation The table already loaded with the new material will be released through a digital signal. Once the working process on the second table is completed, the change will start fully automatically. The new material is cut automatically while the robot will unload the finished work pieces, parallel to the cutting process and without downtimes.

For certain modules extensive safety measures are required. Wire Meshes from WDM Deutenberg are ideally suitable for human and machine protection and guarantee an optimal working process.

Melt pump for the production of medical flow. Melt pumps of this type are used, among other things, in the production of medical fluids, such as those used in respiratory masks. The melt-blown fluid can be used in many different ways in protective masks or filters. The EXTRU series is exkat adapted to the requirements of the melt-blow process and thus works with highest precision.

Melt pump for the production of HDPE / LDPE / LLDPE. Melt pumps of this type are used in the production and processing of HDPE / LDPE / LLDPE. The EXTRU series is exkat adapted to the requirements in these processes and thus works with highest precision. Special serrations allow an almost pulsation-free conveyance of the melt, which guarantees a constantly high product quality.

STAUFF manufactures one of the most comprehensive ranges of replacement filter elements for hydraulic and lubrication applications which are compatible with most of the common competitor products. The STAUFF Replacement Element Program includes replacement elements for over 10.000 part numbers covering almost every major international brands of filter elements. The majority of these are available from stock. Continuous improvement of the materials used as well as strict quality controls which take into consideration international standards guarantee the consistently high performance data of the filter elements. ▪ Innovative research, design and development ▪ Modern production lines with complete monitoring of production ▪ Certified work processes in accordance with: - ISO 9001:2008 (Quality management), - ISO 14001:2004 (Enviromental protection) - OHSAS 18001:2007 (Occupational health and safety) ▪ Comprehensive stocks and quick delivery ▪ Customised products in accordance with...

With high-quality filter tubes and PTFE diaphragms. Paint dust filters Wet painting also results in overspray. Overspray is the solid portion of the paint that is not taken up by the workpiece. According to the purpose of use, the overspray is moist and sticky immediately after release. It is captured by the exhaust air stream in the spray booth and fed to a filter. This can be, for example, a baffle plate filter, paper filter, fleece filter, glass fibre filter or also combinations of these. The adhesive effect causes the paint particles to adhere to the contact surfaces of the respective filter medium, as a result of which a good degree of separation is achieved. However, all these filters are storage filters, i.e. the filters clog up more and more during operation and cannot be regenerated. A filter exchange becomes necessary if the exhaust air rate of the spray booth falls below the minimum. This can be very time-consuming under certain circumstances and the work process must be interrupted in order to do it. To make things worse, not only must the filtered and bound paint residues be disposed of, but also the actual filter materials. Such tooling times are not justifiable for automatic, continuous or multi-layer painting processes. Continuous procedures such as automatically cleaned filters are likewise required for this. The humidity and the adhesiveness of the particles to be filtered are thereby the problem. In order to solve this problem, the paint particles should be relieved of their adhesive capability as far as possible whilst still inside the paint booth. Our patented ‘RTS-Rotation’ system is outstandingly well suited for this. The system is comprised of slowly rotating brush rollers, which take up the adhesive paint particles on the surface of the bristles and allow them to dry there. The bristles are automatically regenerated at pre-specified time intervals by combing devices that swing in at the rear of the brush rollers. The dislodged paint residues can then be removed and disposed of either manually during work breaks or automatically during operation. The degree of separation of this system is, however, insufficient to satisfy the environmental protection requirements concerning residual dust content in the exhaust air. A further filter stage is necessary for that. It must be assumed that the paint particles arriving here are to a certain extent still damp and sticky. For this we use special paint dust filters with high-quality filter tubes with PTFE diaphragms. If necessary, precoating agents (auxiliary dust) are used in order to neutralise the adhesive capability of the particles and to keep the dust layer on the filter elements permeable to air. The precoating agent is injected into the raw air pipe by means of special dosing units. The filter tubes are cleaned by means of compressed air impulse cleaning. The use of this technology requires special know-how. We have had the appropriate experience for almost ten years. The implemented plants have capacities ranging from 5,000 to 90,000 m³ /h. Because of the large number of different paint systems, individual experiments are usually necessary in our pilot plant in order to find the correct solution for the individual case.

Description The multi-coupling has been created for connecting and disconnecting several hydraulic lines at the same time. This is done by an operating lever the guide crank of which is designed for a minimum of operating force. The connection of the hydraulic lines is done with flat face couplings. Due to the secial sealing it is possible to couple against trapped pressure on the male halves (max. 4x100 bar/ 5802 PSI) The main features of the multi coupling are: · Safety against commutability of hydraulic lines · Quick connecting · Coupling against trapped pressure · Optimally minimized leakage during coupling process Working Pressure 250 bar / 25 MPa / 3626 PSI Material Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE, PU

Glasslifter for field assembly at construction side for windows and glass Windows and glass are expensiv and damageable. AERO-LIFT has developed the CLAD-LIFT to handle glass with care and save. Four seperate vacuum circles with four vacuum pumps holds the load save even if one seal of a suction plate ist defectiv. Functionality and features Vacuum lift for glass panes weighing up to 1000 kg, with off-grid power supply. Safety is ensured during the work process by a so-called quadruple circuit system. The redundant valves, suction plates and vacuum tank are used for controlling four separate suction circuits. The four suction circuits are monitored separately by the warning system and thus ensure full load-bearing capacity even in the event of a power outage. The glass lift is able to pick up and put down the panes both vertically and horizontally. Glass panes can be turned unrestricted 360°. Thanks to the battery power supply, the vacuum lift can also be...

Cutting, punching, perforating, folding and register cutting are among the most important work steps in the production process. These are the main tasks of our knives – used in a wide variety of ways, for applications on various types of machines. With excellent repeat performance and optimally protected against wear and tear, for highly profitable knife inserts and tool life.

Cutting, punching, perforating, folding and register cutting are among the most important work steps in the production process. These are the main tasks of our knives – used in a wide variety of ways, for applications on various types of machines. With excellent repeat performance and optimally protected against wear and tear, for highly profitable knife inserts and tool life.

Cutting, punching, perforating, folding and register cutting are among the most important work steps in the production process. These are the main tasks of our knives – used in a wide variety of ways, for applications on various types of machines. With excellent repeat performance and optimally protected against wear and tear, for highly profitable knife inserts and tool life.