White grease - Import export

Lubrication of dirt-sensitive sliding points in mechanisms Assembly lubrication with large lubricant reservoir, e.g. chucks in which a supplemental relubrication at longer intervals with grease guns is possible Advantages and benefits Excellently suited for dirt-free assembly and long-term lubrication Highly effective due to optimum solid lubricant combination Broad range of uses in area of parts sensitive to soiling Low consumption due to formation of highly effective lubricating films Good corrosion protection behaviour For best adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610 or OKS 2611 universal cleaning agent. Use a brush, spatula or similar to apply evenly a suitable quantity of paste to the head or nut contact surface and to the thread. The paste will also act as a sealant. Do not use paste instead of grease and mix only with suitable lubricants.

Lubrication of normal-load friction, rolling and pivoting bearings Lubrication of spindles and guides at machines Lubrication of moving parts at fine-mechanical devices as well as household appliances Advantages and benefits Lubrication when dark-coloured lubricants cannot be used Saving of maintenance and lubricant costs by reducing downtimes and corrective maintenance Waterproof NSF H2 registered Also available as spray version OKS 471 (without NSF certification)

Lubrication of normal-load friction, rolling and pivoting bearings Lubrication of spindles and guides at machines Lubrication of moving parts at fine-mechanical devices as well as household appliances Advantages and benefits Lubrication when dark-coloured lubricants cannot be used Saving of maintenance and lubricant costs by reducing downtimes and corrective maintenance Waterproof Clean the lubricating points well for optimal effect. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value below 50,000) and their housings should be filled completely. In as far as available, the bearing and machine manufacturer's instructions should be observed.

Universally applicable Largely biodegradable Silicone-free CO2 propellant Water-displacing Provides a protective coating Saltwater-resistant Super Lube is suitable for many materials and material compounds, such as iron, wood, non-ferrous metals, synthetics, leather, etc. Get your car ready in time for winter: Super Lube prevents car locks and doors from freezing. Super Lube – 17 products in one can: Aluminium cleaner and care product, greaser and lubricant for antennae, interior room spray, adhesive lubricant, high pressure lubricant, fan belt spray, contact and electro protection agent, assembly compound, MOS-2 lubricating and dissolving spray, rust and dirt remover, acid-resistant lubricant and terminal grease, locks and cylinder locks lubricant and line grease lubricant with PTFE, silicone spray, white greases and compounds, chain spray, Bowden cable spray. Fields of application The automotive industry, construction machinery, agricultural...

Super Screw connectors are available in different versions of textile reinforced rubber abrasion resistant, heat resistant, oil and grease resistant, white FDA, self extinguishing, with textile on the running surface or in stainless steel. Screws are available in either galvanised or stainless steel. Super Screw connectors are inserted in the belt diagonally and from both sides. After the rubber layer is removed, the connector is installed using just a cordless screwdriver or, in underground mining, using a breast drill or pneumatic screwdriver. Super Screw® connectors are pre installed, depending on the belt width, in lengths up to 3,000 mm or in rolls up to 25,000 mm long. A variety of screws is also available for the initial installation of the connectors or as spare parts, plus various cordless screwdrivers, a pneumatic screwdriver, brace, PZ 2 or PZ 3 cross head bits and a magnetic bit holder.