Results for
BS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Retractable power distributor SV301 for outdoor use, made of saltwater-resistant aluminum. The retractable power distributor SV301 is accessible by car, of course, only when the lid is fully closed. The standard surface is natural aluminum. As standard, the distributor is equipped with 4 SCHUKO sockets with VDE test mark. The housing is watertight when closed, protection class IP67. Further assembly variants on request.
Request for a quoteKERSTEN ELEKTROSTATIK GMBH
Germany
The DV 106 high-voltage Distributor serves as a link between the generator and discharge components. The system can be expanded due to its additional slots.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor 5622E with 4 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The surface-mounted wall distributor 5622E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor 5606E with 6 slots. The housing of the wall distributor is made entirely of stainless steel. The door can be locked with a profile half cylinder lock and can also be closed with standard plugs inserted. The 5606E on-wall distributor is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Hanging distributor HV1006 made of stainless steel with 6 units: three Schuko sockets with VDE certification, one CEE 5/16A 400V/6h socket with VDE certification, one RJ45 double CAT6A and a compressed air coupling. Ideal for use in workshops. The hanging distributor HV1006 is delivered with hooks and carabiners (without cables, hoses and wire ropes shown).
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Retractable Power Distributor/power bollard SV501 for indoor and outdoor use, made of saltwater-resistant aluminum. Due to its solid construction, the SV501 lowering distributor can be driven over by a truck, of course, only when the lid is fully closed. The surface is anodized with a stainless steel look. The retractable power distributor SV501 is equipped with 8 protective contact sockets 2 / 16A 230V with hinged cover (unsecured, without wiring). The devices are raised and lowered using a crank. Drainage is required for outdoor installation. The housing is watertight when closed, protection class IP67. Alternatively, other combinations are also possible. Further equipment variants and colors on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Retractable power distributor SV302 for outdoor use, made of saltwater-resistant aluminum. The retractable power distributor SV302 is accessible by car, of course, only when the lid is fully closed. The standard surface is natural aluminum. As standard, the distributor is equipped with 4 SCHUKO sockets with VDE test mark. The housing is watertight when closed, protection class IP67. Further assembly variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor 5722E with 4 slots, splash-proof. Protection class IP 44 (electrical units). The housing is made of Sendzimir galvanized sheet steel. The frame and the door are made of stainless steel and the device carrier is made of aluminum. The door closes even when standard plugs are inserted and can be locked with a profile half-cylinder lock. The 5722E flush-mounted wall distributor is suitable for indoor and outdoor use. The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.
Request for a quoteJ.D. GECK GMBH
Germany
The Geck disinfection system Aguarico is an optional mobile display to enable mobile disinfection use and to protect you and your customers or employees in highly frequented locations. Our product portfolio includes disinfection systems with pump dispensers for manual operation and SensorTouchcontrolled systems that can be operated without contact. Both systems are currently available, we look forward to your inquiry. Contact us at any time via gesundheit@geck.de or visit our website https//www.geck.de/en/healthpreventionsystems.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor 5723E with 5 slots, splash-proof. Protection class IP 44 (electrical units). The housing is made of sendzimir galvanized sheet steel. The frame and the door are made of stainless steel and the device carrier is made of aluminum. The door closes even when standard plugs are inserted and can be locked with a profile half-cylinder lock. The flush-mounted wall distributor 5723E is suitable for indoor and outdoor use. The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor 5623E with 5 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half-cylinder lock, even with plugged-in standard plugs. The surface-mounted wall distributor 5623E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor 5620E with 2 CEE slots and a housing made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The on-wall distributor 5620E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor with 2 slots, splash-proof. Degree of protection IP44 (electrical units). The housing is made of sendzimir galvanized steel sheet. The frame and the lid are made of solid aluminum and anodized in natural aluminum. The cover also closes in straight or angled form when standard plugs are inserted. Ideal for sports halls: tested, unrestricted ball throwing safety in accordance with DIN 18032-3: 1997-04. Further equipment variants and colors on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor 5503A with 3 slots, splash-proof, protection class IP44. The storage box is made of sendzimir galvanized steel sheet. The frame and the lid are made of solid aluminum and anodized in natural aluminum. The lid is secured with a lock and closes in a straight or angled shape even when standard plugs are inserted. Ideal for sports halls: tested, unrestricted ball throwing safety in accordance with DIN 18032-3: 1997-04. Further equipment variants and colors on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall socket 5602E with 2 slots, for standard plugs in straight or angled form. The complete housing is made of V2A stainless steel and the device carrier made of aluminum. The door can be closed with a locking bolt cylinder and also closes when plugged in. The 5602E on-wall socket is ideal for workshops, cellars and washrooms. Further equipment on request!
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
CEE wall socket 5510E with one slot, waterproof. Degree of protection IP 67. The housing is made of stainless steel V4A, for mounting on the wall. The CEE on-wall socket 5510E can be used both outdoors and indoors. Excellent for use in the catering sector and in a saline environment. Further configuration variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall socket 5501A with one slot, splash-proof, with protection class IP44. The hinged lid can be locked with a key and is therefore primarily protected against unauthorized use. The storage box is made of sendzimir galvanized steel sheet. The frame and the lid are made of solid aluminum and anodized in natural aluminum. Further colors and equipment variants on request.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TECHNOTRANS SOLUTIONS GMBH
Germany
PROCESS DATA MEASUREMENT AND PROCESS CONTROL ON HIGHEST LEVEL AND MAINTENANCE-FREEFollowing the user‘s request for easy maintenance and low susceptibility to slightly soiled water, the proflow ultrasonic - as a replacement for the current and widely used standard measuring variant with impeller, turbine or vortex - now makes contactless measurement according to the ultrasonic principle (without rotating parts) available. The sensors can be visualized via a protemp controller or connected to a PLC. Alternatively, the mechanical flow measurement according to the differential pressure principle is available with the proflow mechanical. Easy to integrate in machines and plant lines 4 or 6 x consumer channels (forward/return) 1/2“ With LED-display on fl ow sensor Temperature measurement PT 1.000 Big RED/GREEN Status LED 1 x main connection 1“ Flow rate each channel 1 ... 30 l/min (no „overload-risk“-> 60 l/min possible]) Operating temperature: 0 ...120 °C
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
The multiple water quantity control system in modular design that is available in several versions fulfils not less than three requirements at the same time. It combines the advantages of the conventional water distributors, the impulse cooling systems and the continuously operating temperature control units while eliminating the disadvantages of each of these systems. The temperature control system disposes of up to 128 individually adjustable circuits and is suitable for the processing of polyolefins and technical thermoplastic materials. In case of the basic execution (itd B) the requested flow rate is adjusted manually and is then monitored by a flow meter and presented digitally and graphically on the central display of the control unit. In the standard execution (itd R) the water quantity is individually set for each circuit at the central operating unit and - if necessary - is readjusted automatically via a water quantity regulation valve within adjustable limit values.
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
PROCESS DATA MEASUREMENT AND PROCESS CONTROL ON HIGHEST LEVEL AND NEARLY MAINTENANCE-FREEFollowing the user‘s request for easy maintenance and low susceptibility to slightly soiled water, the proflow mechanical - as a replacement for the current and widely used standard measuring variant with impeller or turbine - now makes mechanical measurement according to the differential pressure principle (without rotating parts) available. The sensors can be visualized via a protemp controller or connected to a PLC. A completely non-contact flow measurement based on the ultrasonic principle is available with the proflow ultrasonic. Robust flow measurement in consumer return line PT 1.000 temperature measurement in consumer return line 6 x 2 consumer channels 3/4“ female screw thread 1 x 2 main connection 1“ female screw thread Available in three temperature variants: operating temperature up to 100°C, up to 160°C and up to 180°C Max. flow rate each channel:: 25 l/min or 50 l/min
Request for a quoteKERSTEN ELEKTROSTATIK GMBH
Germany
The DN 102 power supply in the KERSTEN neXt® product family is the control station for your discharge system. It supplies and controls up to 5 high voltage generators in the KERSTEN neXt® range and also offers you connection and control of a solenoid valve or AK 1x6 compressor controller. Floating contacts are provided for error and enabling signals. The current operational status of each function is signalled via 9 LEDs in the enclosure lid.
Request for a quoteHUGO BRENNENSTUHL GMBH & CO. KG
Germany
For universal outdoor use and permanent use on sites, IP 44. Stackable, robust plastic housing, splash-water protected. Sturdy metal carrying handle. Oil resistant rubber cable for permanent outside use. Cable length: 1 m Cable: H07RN-F 5G1,5 Plug: CEE 5-pin 400 V/16 A Socket: 3 x CEE 5-pin 400 V/16 A 3 x 230 V/ 16 A
Request for a quoteHUGO BRENNENSTUHL GMBH & CO. KG
Germany
For universal outdoor use and permanent use on sites, IP 44. Robust, plastic-coated steel-tube frame for steady position and additional protection for housing. With an ergonomic carrying handle for comfortable carrying. Oil resistant rubber cable for permanent outside use. With RCD circuit breaker 30 mA for extra safety. Earthed sockets in pairs with different phases. Protective cover for fuses, lockable. Cable length: 2 m Cable: H07RN-F 5G4,0 Plug: CEE 400 V/32 A, 5-pin Socket: 1 x CEE 400 V/32 A, 2 x CEE 400 V/16 A, 4 x 230 V/16 A Protection: 1 x FI 40 A 4-pin, 30 mA 1 x LS 400 V/16 A 2 x LS 230 V/16 A Plug-in system: DE
Request for a quoteGRONEMEYER MASCHINENFABRIK GMBH & CO.
Germany
The Gronemeyer synchronized distributor divides the stream of products batch-by-batch and gently into two lanes. During the distribution process the products are not braked, so that functional reliability is ensured even at high speeds. The compact design permits simple incorporation into existing lines. Technical data Distribution: 2 lanes Distribution process during continuous flow of materials Product gap: from 5 mm Conveyor speed: more than 60 m/min. Lane distance: 110 mm, 130 mm Complete machine cover made of Makrolon with maintenance doors Independent electrical control system with congestion monitoring Installation length: 1200 mm Optional equipment Loading and unloading belts
Request for a quoteSANHA GMBH & CO. KG
Germany
SANHA stainless steel heating circuit distributors are suitable for all hot water heating systems in accordance with EN 12828, and for panel heating / cooling systems in accordance with EN 1264, and can therefore be used not only in residential buildings, but also in industrial, commercial and public buildings.
Request for a quoteSTEINER GMBH & CO. KG
Germany
Filling systems are only as good as they were planned, standard solutions rarely provide the desired properties. We offer possible solutions for special template container in L- or Z-form with up to 20 meters conveying height and 60 meters in length, These systems could be integrated into your building architecture. PS: For low-noise operation, we also offer whisper quiet solutions!
Request for a quoteSANHA GMBH & CO. KG
Germany
Stainless steel heating circuit distributor, with integrated control valve insert for supply flow and thermostat valve inserts for return flow, incl. zinc-coated wall bracket and draining set
Request for a quoteSANHA GMBH & CO. KG
Germany
The SANHA®-Heat cross tees and distributors on one or two levels provide an optimal solution for both new construction as well as for the housing stock. Tees and distributors can be installed within the heat and footfall insulation in a way that saves time, money, and space. For a particularly easy and time-saving connection of radiators SANHA also offers a nickel-plated CU-VN-block including insulated box available.
Request for a quoteSTEINER GMBH & CO. KG
Germany
Filling systems are only as good as they were planned, standard solutions rarely provide the desired properties. We offer possible solutions for special template container in L- or Z-form with up to 20 meters conveying height and 60 meters in length, These systems could be integrated into your building architecture. PS: For low-noise operation, we also offer whisper quiet solutions!
Request for a quoteResults for
Distributor - Import exportNumber of results
34 ProductsCountries
Company type
Category