Spraying - Import export

ERC Throttle/Butterfly Valve Cleaning Spray breaks down stubborn impurities in the carburettor system and prevents major repairs. THE EFFECT Deposits and impurities in the intake and throttle valve area impair the function of the carburettor system and increase the risk of corrosion and expensive repairs. THE ADVANTAGES AT A GLANCE - Removes soiling in the intake and throttle valve area - Cleans grease, dirt, and oil residue, as well as rubber abrasion off of metal surfaces - Can be used on (carburettor) linkages, cable wire passages and metal bearings

Highly effective spray for hand sanitisation without water. Provides thorough hand hygiene on the go. With certified organic alcohol and plant-based ingredients for a fresh and clean skin feel. Dosage Thoroughly rub 2 x 3 ml into your hands and allow it to take effect for 60 seconds. Please use biozides with care. Always read the label and product information before using. alkohol denat. aqua glycerine lactic acid citric Acid Made with certified organic ingredients.

SCHÜTZE spray valve MMFS pneumatically controlled roundspray valve. Designed for spraying signature- and marking colours. Very fine and small sprayjet. nozzle and needle: stainless steel available nozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 2,0 mm ø roundspray aircap

SCHÜTZE WS 5/1 fluid sprayer spraying liquids under pressure in a hollow cone jet without atomizing air. drill-hole in nozzle plate: 1,5 mm ø (other drill-holes depends on liquid) Simple design. Also to be connected to any water supply line. weight: 300g

SCHÜTZE W 5 / P blowgun with 50 mm pipe (standard lenght), other lenght available special acessories: rebound guard, flat nozzle, silencer nozzle, venturi nozzle SCHÜTZE W 5 / G blowgun, with spraight handle with 50 mm pipe SCHÜTZE W 5 / PB blowgun with silencer and increased blow power

SCHÜTZE S 720 Universal AIRLESS spraygun S 720/250 up to 250 bar S 720/500 up to 500 bar S 720/LV to be equipped with standard airless nozzles or in LV version for extrusion nozzles standard supply: - filter - 1/4” swivel safety devices: trigger lock trigger guard

SCHÜTZE 2-K-spraygun two-component-spraygun Supply of both components directly into each sprayhead. Supply of atomizing air and control air via gun body. Only one trigger. Mixing within spray jets. Mixing ratio can be regulated individually. available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5 mm ø flatspray or roundspray pattern depending on aircap, all material leading parts made from stainless steel. For glues special nozzle sets (KLS-version) available. weight: only 490g

SCHÜTZE W 3 / FZ-Duo FINE-SPRAY gun, a special design for spraying fluids of low viscosity, f.i. release agents available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0 mm ø nozzle and needle: stainless steel flatspray or roundspray pattern depending on aircap - spiral nozzles for glues etc. - nozzle extensions in various versions gun body: aluminium, anodized blue weight: 245g Also available in HVLP-technique.

SCHÜTZE W 3 / FZ-Duo FINE-SPRAY gun, a special design for spraying fluids of low viscosity, f.i. release agents available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0 mm ø nozzle and needle: stainless steel flatspray or roundspray pattern depending on aircap - spiral nozzles for glues etc. - nozzle extensions in various versions gun body: aluminium, anodized blue weight: 245g Also available in HVLP-technique.

SCHÜTZE W 3 / FZ-Duo with round/flat spray regulation FINE-SPRAY gun available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0 mm ø nozzle and needle: stainless steel gun body: aluminium, anodized blue Also available in HVLP-technique.

SCHÜTZE W 3 / W 3 F decor and “small job” spraygun 50 ccm flow cup, aluminium available nozzle dimensions: 0,3; 0,5; 0,8; 1,0 mm ø type W 3 = Roundspray type W 3 F = Flatspray available flow cups: 50 ccm, aluminium 0,3 ltr., aluminium nozzle and needle: stainless steel gun body: aluminium, anodized blue weight: 310g

SCHÜTZE S 947 heavy duty convertible spraygun incl. precision air micrometer, with feed pipe, flowcup or syphoncup available nozzle dimensions: 0,8; 1,0; 1,2; 1,3; 1,4; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm ø nozzle and needle: stainless steel gun body: aluminium, anodized blue Also available in HVLP-technique

SCHÜTZE W 7 convertible spraygun with feed pipe, flowcup or syphoncup available nozzle dimensions: 0,5; 0,8; 1,0; 1,2; 1,5; 1,8; 2,0; 2,5 3,0 mm ø nozzle and needle: german silver, stainless steel on request - spiral nozzles for glues etc. - nozzle extensions in various versions gun body: aluminium, anodized blue

SCHÜTZE S 941 Heavy duty spraygun incl. precision air micrometer, 0,6 ltr. flow cup, plastic with drop stop available nozzle dimensions: 0,8; 1,0; 1,2; 1,3; 1,4; 1,5; 1,7; 2,0 2,5; 3,0; 3,5 mm ø nozzle and needle: stainless steel gun body: aluminium, anodized blue weight: 720g Also available in HVLP-technique

SCHÜTZE W 4 pressure feed cup gun 0,7 ltr. pressure feed cup, aluminium max. material pressure = 1 bar available nozzle dimensions: 0,5; 0,8; 1,0; 1,2; 1,5; 1,8; 2,0; 2,5 3,0; 3,5 mm ø nozzle and needle: german silver, stainless steel on request gun body: aluminium, anodized blue weight: 950g

SCHÜTZE W 2 roundspray spraygun 0,3 ltr. flow cup, aluminium available nozzle dimensions: 0,5; 0,8; 1,0; 1,2; 1,5; 1,8; 2,0; 2,5 3,0 mm ø nozzle and needle: german silver gun body: aluminium, anodized blue weight: 530g

SCHÜTZE W 1 standard spraygun 0,6 ltr. flow cup, aluminium available nozzle dimensions: 0,5; 0,8; 1,0; 1,2; 1,5; 1,8; 2,0; 2,5 3,0; 3,5 mm ø nozzle and needle: german silver, stainless steel on request - spiral nozzles for glues etc. - nozzle extensions in various versions gun body: aluminium, anodized blue weight: 635g

SCHÜTZE spray valve KA 2/Airless The automatic spray valve KA 2/Airless is an airless spray valve. The fluid will be squeezed through the spray valve and thereby atomized. Because of it´s low weight and the small measurements the KA 2/Airless is ideal for all applications with low space requirements. needle seat and needle: stainless steel

SCHÜTZE AIRLESS-spray valve S 830 Spray valve without atomizing air. Connections of valve on under-side. Control of S 830 via external pneumatic valves. Max. material pressure: 250 bar All standard airless nozzles can be fitted to the S 830. needle seat and needle : tungsten carbide

SCHÜTZE extrusion valve MVV The mini extrusion valves of series MVV are designed for the application of oils, release agents and other thin liquids. The application can be done punctiform or linear. nozzle + needle: stainless steel available nozzle dimensions: 0,2/0,3/0,4/0,5/0,6/0,8 mm Ø

SCHÜTZE Extrusionsventil MMKD 50 Very fast and exact valve for continuous or intermittend application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV). The extreme short control air distances and the high speed solenoid gives this valve very fast and exact needle intermission cycles up to 200 cycles per second. nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMDV/MV (LV/KV) Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV). nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMKD 30 Very fast and exact valve for continuous or intermittend application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMDD LV Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle : stainless steel needle : tungsten carbide available nozzle dimensions : 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMDV and MMDV LV/KV Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE spray valve GF / 5 with quick release adapter Designed for spraying colours, paints etc. Spray angle can be regulated individually by separate air connection from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 1,4; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm ø Also available in HVLP-technique

SCHÜTZE spray valve GF / 4 Designed for spraying colours, paints etc. Spray angle can be regulated individually by separate air connection from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nnozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 1,4; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm Ø Also available in HVLP-technique

SCHÜTZE spray valve GF / 3 Designed for spraying colours, paints etc. With integrated atomizing air valve for regulation of purging air. Spray angle can be regulated individually from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm ø Also available in HVLP-technique

SCHÜTZE spray valve GF / 1 + GF / 2 These spray valves are robust apparatuses for application of colours, paints. Also suitable for spraying release agents and glues. nozzle and needle: stainless steel available nozzle dimensions: 0,5; 0,8; 1,0; 1,2; 1,5; 1,8; 2,0; 2,5; 3,0; 3,5 mm ø. flatspray or roundspray pattern