Results for
WIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® 340 is a weakly alkaline cleaning agent for grease, oil and oil carbon soiling. Very suitable for pre-cleaning or basic cleaning of soiled steel, cast iron and non-ferrous metal or plastic parts in an ultrasonic bath or in a spray cleaning system. After cleaning and without water rinsing, the parts are temporarily protected against corrosion. The final drying can be accelerated by blowing off with compressed air, a warm air flow or treatment in a drying cabinet. WIWOX® 340 can be used in a concentration of 5 – 7 %. Dilution with water depends on the degree of contamination and the intended exposure time. The bath should have a temperature of approx. 60° C. The bath should be kept at a constant temperature. In the field of precision mechanics, longer exposure times are possible depending on the degree of contamination.
Request for a quoteWOMA GMBH
Germany
With operating pressures of up to 1,000 bar, the Yseries pumps are ideally suited to a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning. Due to the small size and low weight, they can be easily installed in unit with very small base frames.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
The 700 VA series float valve allows infinite adjustment of the level and has a flat float rod for mounting variable floats. It is suitable for use at high and low pressure and high temperatures up to 120°C, but not for use in drinking water. The stainless steel float model is suitable for simple mechanical regulation of levels in the food, pharmaceutical and chemical industries due to the VA materials and silicone seals.
Request for a quoteROLF KÖRNER GMBH
Germany
We produce filter discs and cuttings in any measurement and shape from wire cloths and metal fiber felts. All products can be ultrasonically cleaned, if requested!
Request for a quoteGEBRÜDER LÖDIGE MASCHINENBAU GMBH
Germany
The high-shear mixer is a system for mixing, granulation of pharmaceutical powders and granulated products. Moreover, it is suitable for a wide range of cosmetics and food products. A three-bladed mixing tool rotates in a vertical, cylindrical mixing vessel close to the wall and to the bottom of the vessel. The shape and peripheral speed of the mixing tool create a vortex-like circulation of the mix. A separately driven chopper is used for breaking up agglomerated products as well as for moistening and granulation. Liquid addition is either gravimetric or uses a pump to add liquid directly to the effective range of the chopper, so that the best possible distribution is ensured. The optional wet sieve on the discharge ensures a completely homogeneous distribution of the granulate size. The PC/PLC-based control system to be compliant with CFR-21 Part 11. The updated user interface permits intuitive machine operation in service and automatic mode for production and cleaning operation.
Request for a quoteGEBRÜDER LÖDIGE MASCHINENBAU GMBH
Germany
Lödige DRUVATHERM® reactors are batch reactors. Rotating mixing elements adapted to the specific process, installed in a cylindrical drum equipped with a temperature control jacket, create a three-dimensional product movement. The resulting contact frequency of the reacting agents with each other leads to a more effective conversion with a higher yield. The mixing elements ensure high contact frequency of the reacting agents with each other and intense contact of the reacting agents with the heated or cooled vessel wall. This makes reactions in homogeneous and heterogeneous phases possible in practically all combinations (solid/liquid/gaseous). The production consistency can be anywhere along the spectrum of liquid to pasty to lumpy to pourable. High-speed rotating choppers installed on the side of the machine drum perform additional mixing work to distribute the reacting agents.
Request for a quoteGEBRÜDER LÖDIGE MASCHINENBAU GMBH
Germany
The continuous ploughshare mixer uses the mixing and fluid process introduced to mixing technology by Lödige. The ploughshare shovels in special arrangement on a mixing shaft in a horizontal, cylindrical drum rotate. Their peripheral speed and geometric form are coordinated in such a way that the mix is moved out of the product bed against the centrifugal force and in axial direction at the same time. The mixing elements having a defined shape and a special arrangement on the shaft, they ensure not only a reliable product conveyance but also a sufficient back-mixing of the product. All the product is constantly involved in the process, ensures a maximum mixing intensity at highest throughputs and shortest residence times until the product is discharged out of the mixer via an outlet. The continuous process can be run at filling levels between 20 % and 50 % without influencing the mixing quality. Choppers can be additionally installed in the mixing drum.
Request for a quoteGEBRÜDER LÖDIGE MASCHINENBAU GMBH
Germany
Lödige shovel dryers are batch vacuum dryers. The mixing elements are frequency-controlled for ideal adaptation to the process. Special rotating mixing elements, installed in a cylindrical drum equipped with a temperature control jacket, create a three-dimensional product movement . The resulting contact frequency of the particles with the heat exchange surface leads to incredibly short drying times. The intelligent product movement ensures intense contact of individual product particles with the heated container wall while also providing very gentle product treatment. The chopper rotating at high speeds is used to disperse the product during transition between phases. Product surfaces are opened up during this process. This leads to a significant increase in drying capacity and prevents moisture and temperature gradients. Fine particles pulled along by solvent vapours are separated in the filter and returned to the product bed through pneumatic filter cleaning.
Request for a quoteGEBRÜDER LÖDIGE MASCHINENBAU GMBH
Germany
Lödige DRUVATHERM® reactors are batch reactors. Rotating mixing elements adapted to the specific process, installed in a cylindrical drum equipped with a temperature control jacket, create a three-dimensional product movement. The resulting contact frequency of the reacting agents with each other leads to a more effective conversion with a higher yield. The high-speed mixing elements ensure high contact frequency of the reacting agents with each other and intense contact of the reacting agents with the heated or cooled vessel wall. This makes reactions in homogeneous and heterogeneous phases possible in practically all combinations (solid/liquid/gaseous). The production consistency can be anywhere along the spectrum of liquid to pasty to lumpy to pourable. High-speed rotating choppers installed on the side of the machine drum perform additional mixing work to distribute the reacting agents.
Request for a quoteIBK WIESEHAHN GMBH
Germany
Description - Suction and delivery hose for conveying solvents and chemicals with high concentration - The fluorinated inner liner ensures an excellent impermeability and utmost resistance to oxidation, to extreme temperatures and to mechanical stress, thus avoiding cracks - Hose in accordance with EC 1935/2004 and 2023/2006/EC (GMP) and EC 1907/2006 (REACH) - Meets the standards EN 12115:2011 Tube - MFA (Perfluoralkoxy Polymer), fully fluorinated, white, patented, mirror-smooth, no contamination of taste and smell - Compliance: UPS Class VI, FDA standards and D.M 21/03/73 Reinforcement - Plies of high strength synthetic textile - Embedded steel helix wire - Built-in copper wires Cover - EPDM, black, smooth, resistant to abrasion, ozone, weather and high temperatures, cloth finish - According EN 12115:2011, antistatic (R < 10^6 Ω)
Request for a quoteIBK WIESEHAHN GMBH
Germany
Description - Suction and delivery hose for conveying a wide range of chemical aggressive products - Meets the standards EN 12115:2011 - Engineered to ensure the dissipation of electrostatic currents not only superficially, but also through the hose wall - For suction and discharge service Tube - UPE (Ultra High Molecular Weight Polyethylene), black, smooth, antistatic (R < 10^6 Ω) Reinforcement - Plies of high strength synthetic textile - Built-In copper wires are available upon request - with or without Embedded steel helix wire Cover - EPDM, black, smooth, antistatic (R < 10^6 Ω), resistant to abrasion, ozone, weather and high temperatures, cloth finish
Request for a quoteIBK WIESEHAHN GMBH
Germany
Description - Suction and delivery hose for a wide range of chemicals with a medium or low concentration - Meets the standards EN 12115:2011 Tube - EPDM, black color antistatic (R < 10^6 Ω), smooth, resistant to abrasion, high temperatures, acids and alkali Reinforcement - Plies of high strength synthetic textile - with or without Embedded steel helix wire Cover - EPDM, black, antistatic (R < 10^6 Ω), smooth, cloth finish, resistant to abrasion, ozone, weather and high temperatures
Request for a quoteMIXACO MASCHINENBAU
Germany
Gentle Mixing Without Tools MIXACO Revolution™ is mixing system that functions without tools. Gentle mixing of materials during rotation of the container is achieved with built-in mixing segments. This technology without driven mixing tools prevents additional thermal stress for the product. All Benefits at a Glance •Gentle homogenization •No inadvertent warming of mixing materials •No abrasion of granulates •Double-walled mixing vessel allows temperature-controlled mixing •Energy-efficient through low drive power consumption •100% discharge by pivoting to discharging position •Good accessibility for fast, easy cleaning •Tool-free design makes maintenance easy •Suitable for ATEX applications (up to Zone 20 without inertization of protective gases)
Request for a quoteMIXACO MASCHINENBAU
Germany
MIXACO High-Speed Mixer A high friction rate is achieved by circumferential speeds of 15-40 m/s, resulting in intensive heating of the product. The required power input can be regulated flexibly. The MIXACO high-speed mixer can be extended by many additional functions and adapted for individual mixing tasks, so it is a particularly cost-effective solution for customized integration into new or existing production workflows. All Benefits at a Glance * Flexible deployment for a wide variety of applications e.g. heating, agglomerating, coating or dispersing * Process-optimized mixing tools guarantee optimum power input * Frequency converter for variable, product-appropriate power input settings * Wide range of additional functions allow ideal adaptation to your specific mixing tasks or installation space requirements * ATEX version possible
Request for a quoteMIXACO MASCHINENBAU
Germany
The Robust Workhorse: The high-performance MIXACO universal mixer is ideal for many different applications. Whether slow, gentle homogenization or thorough mixing is required, consistently high quality is guaranteed for every mixing process. In particular, the universal mixer’s highly flexible design possibilities enable it to be adapted easily to suit the required mixing task and individual on-site requirements. The MIXACO universal mixer is available in sizes from 20 to 6,000 liters. All Benefits at a Glance •Can be used for a wide variety of applications, such as homogenization, dispersion, coating or granulation •Mixer tools optimized for the individual mixing task •Performance-optimized selection of mixing drives ensures high energy efficiency •Rapid cleaning possible when pivoting mixer lid is open •Double-walled mixing vessel enables ideal temperature control of product during mixing •ATEX version possible
Request for a quoteMIXACO MASCHINENBAU
Germany
MIXACO Heating/Cooling Mixer MIXACO’s combined heating/cooling mixers are the optimum solution for complex mixing challenges. The systems are characterized by their outstanding product preparation in the heating phase and high-efficiency cooling performance. The horizontal and vertical heating/cooling mixers are designed for high-volume throughput, rapid processing and short cleaning times. The Relaunch of a Classic Tried and Tested Technology With New Product Concept and Attractive Price-Performance Ratio The consistent development of tried and tested technology is a MIXACO hallmark, which also applies to our heating/cooling mixers. The product line has been completely redesigned following comprehensive analyses of all components. In addition, our range of international maintenance and support services are optimized continually and are under continuous review.
Request for a quoteMIXACO MASCHINENBAU
Germany
The All-In-One Mixer The basic principle of the MIXACO sack and drum mixer Speedy™ is the mixing of small batches directly in sacks or drums. Specially developed dead-space free mixing sacks with a capacity of 50 or 100 liters are available for powder and granulates. Volumes of up to 200 liters can be mixed in drums. Besides powders and granulates, liquids can also be mixed. The MIXACO Speedy™ is the ideal solution in terms of internal logistics: the product is weighed, mixed, moved and stored in the same sack or drum. All Benefits at a Glance • Only one container required for weighing, mixing, conveying and packaging the product • No refilling or transferring required • Short tool cleaning times • Highly flexible • Many combinations of tools and motors possible for a wide variety of mixing applications • Low energy consumption
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
JOSEF JASPER GMBH & CO. KG
Germany
For costumers from the steel industry, power plant construction, the chemical industry as well as other industries we manufacture specific pipelines in all sizes and fittings based upon isometric projections or customers´ measurements.
Request for a quoteHEUTE + COMP. GMBH + CO
Germany
Coatings made of PFA and PVDF fluorine-based thermoplastics provide safe protection against corrosion even on exposure to aggressive media. Because its molecular structure resembles that of PTFE, PFA is almost universally resistant to chemicals. Other special features of PFA linings are their wide range of operating temperatures and easy cleaning due to the material’s non-adhesive nature. In many applications, this makes it possible to replace stainless steel with a raw material which is not only much more economical but also easier to process. Because coatings are applied in a thermoplastic transfer-moulding process, it is necessary to account for certain design aspects which our team will gladly discuss with you in advance.
Request for a quoteResults for
Chemical industry - Import exportNumber of results
20 ProductsCompany type