Better products - Import export

Preset Clicker Type Torque Wrench with Fixed Square Drive The strong dimensioned torque spring is the very heart of this clicker wrench. With reaching the pre-set torque, the torque spring is squeezed slightly, and the hardwearing pawl is releasing the tool tang. An excellent tactile and audible impulse signals that the pre-set torque is achieved. The torque is preset and locked in with a special tool, and tamper-resistant/tamper-evident seals can be installed. Torque can be set using any torque measurement/calibration device providing ± 1% accuracy or better. See our „Torque Measurement“ products. Key Features: - Accuracy ± 4% i.v. (within 20-100% of capacity) - Meets or exceeds ASME B107.300-2010 and EN ISO 6789 - Exeptional wear-resistant fixed square drive - Thick-walled housing profile provides high long-term stability - Torque adjustment via optional C.A.R.T. (p/n 819117) - Comfortable cushion grip plus light weight - Can be ordered preset from factory.

Preset Clicker Type Torque Wrench with Dovetail Tang The strong dimensioned torque spring is the very heart of this clicker wrench. With reaching the pre-set torque, the torque spring is squeezed slightly, and the hardwearing pawl is releasing the tool tang. An excellent tactile and audible impulse signals that the pre-set torque is achieved. The torque is preset and locked in with a special tool, and tamper-resistant/tamper-evident seals can be installed. Torque can be set using any torque measurement/calibration device providing ± 1% accuracy or better. See our „Torque Measurement“ products. Key Features: - Accuracy ± 4% i.v. (within 20-100% of capacity) - Meets or exceeds ASME B107.300-2010 and EN ISO 6789 - SR dovetail connector with outstanding rigidity and wear resistance - Thick-walled housing profile provides high long-term stability - Torque adjustment via optional C.A.R.T.

Natural products with a special touch Lienig raw materials offer great benefits, especially in this era of increasingly health-conscious consumers. One particularly good way to use the topinambur tuber, for instance, is as a sugar substitute. The continuously increasing demand for authentic foodstuffs makes it useful to have healthy alternatives. And, if these alternatives are grown locally, do not need to be imported, and fully comply with Germany’s high quality standards, then so much the better. In short: natural products with a special touch. Our broad product range offers many possible applications and uses: Drinks Fruit spreads Juices Yoghurt Muesli / cereals Organic natural foods food products for infants and children etc. Our products are available in a number of forms such as concentrates/syrups, purée, oil, fruit juices or similar, depending on the particular fruit in question.

Now also available from stock: High-quality"½" standard dosing needles, as well as conical and conical black dosing needles for UV applications. In addition to the existing range of mixers and super precision needles, preeflow now also offers"½" dosing needles in various designs. The quality makes the difference: This applies to the dosing systems as well as to the required consumables such as needles and mixers. The years of experience of ViscoTec and the needle manufacturer led to the use and production of premium dosing needles. The processing and design of the dosing needles and the mixer optimizes the application and dosing accuracy of the dispenser. The high-quality needles reduce material losses and improve production performance better than comparable competing models through fast, uncomplicated changeovers and high-precision outputs.

Innovative shapes combined with taste and nutrition With increasing consciousness about healthy eating, cereals, especially extruded cereals, are becoming a standard feature in many households. “Rice-crispies”, “Fruit rings”, “cocoa cereal flakes” are some of the more common extruded cereals. A cereal like product in single piece bite size positioned for consumption alone and as a snack is a sweet snack. Raw-materials: Unlike many single cereal based conventional products, extrusion can be used to produce multi-cereal products with better nutritional balance. Similarly special nutritional requirements of specific group of consumers can be met through suitable selection of the raw-materials. Extruded products can be made in attractive shapes to increase their acceptability among children and introduce the concept of health with fun. Process: Production of cereals is usually a multi-stage process.

Coating sheets for a better grip, better product release or accumulation applications. BEHAbelt cover sheets made of TPU with excellent welding properties for your individual covering of vbelt, timing belt and other belt styles.

The corrosion resistance of Neodymium magnet is considered poor, surface coating is highly recommended for Neodymium magnets. With the expansion of elevators, wind turbines and permanent motors application, the users need higher requirement on corrosion resistance of Neodymium magnet, as the glue cohesiveness of unplated magnet is much better than plated magnets, also unplated products are better in the security. Now, more and more customers tend to use unplated magnets, upon this condition we have developed ultralow weight loss magnets after the continuous innovation and study. Normally, the weight loss test is over 150mg/cm² in the industry of Neodymium magnet, this will be different for magnets produced from different material formulation and manufacturing process. A lot of our new magnets can reach to 1mg/cm², (Testing condition HAST standard for 168hrs), due to its very low weight loss, the corrosion resistance is excellent

DESCRIPTION High stability on high capacity. Can handle multiple ointment viscosity and types Type of metal used S.S 316 / 304 Certifications ISO 90012015, OHSAS 180012007, ISO 500012011, ISO 450012018 SPECIFICATION The 3D blender is widely used in pharmacy, chemical industry, food industry, scientific research, ect… It is suitable for blending drypowder or granular materials with good flowing properties. Powder can be loaded into the 3D blender through a wider opening manhole Multidirectional motion mechanism for a better blending process Final product can be discharged through a butterfly or slide valve Available certification up on your request UL, CE, GMP, FDA, ASME. Available documents up on your request I.Q (Installation qualification), O.Q Operational qualification), P.Q Performance qualification.

Antiblock properties are required for film and flexible packaging production. Antiblock additives enable the reduction of adhesion (also known as “blocking”) between 2 film layers, which results in much better handling both during production and during later use of the product.

ParAlign is a unique, nonoptical measurement method using inertial technology designed to measure the parallelism of rolls in production installations in the paper, print, converting, steel industries, and webhandling/roll to roll transfer processes. Misalignment in rolling machinery can lead to wasted material, inconsistent or lowquality products, and excess machine wear. Properly aligned rolls perform better, create more consistent products, and reduce wear and tear on machinery. Threering laser gyroscopes enable the ParAlign to take measurements in threedimensional space (roll, pitch, and yaw). No line of sight is required, which creates consistent, reproducible results.

Aluminium is environment-friendly, energy saving and available in virtually unlimited quantities – provided that it is handled, processed and recycled appropriately. The finer and more flawless the structures of aluminium products, the better their performance properties. Aluminium master alloys assure the necessary grain refining and modifying, thus guaranteeing effective control of metallurgical structures. The development of such high quality master alloys is inseparably linked with the name Technologica. We offer all common TiB grain refiners in rod on coil or cut rod. For the manufacture of Al alloys we can offer a wide selection of master alloys either as waffle plate or alloying tablets. Please ask us for a detailled offer. Additionally our warehouse service for grain refining and modification master alloys assures prompt deliveries. Since years we have maintained an ex stock service for small and medium size foundries. We constantly keep in stock TiB 5:1, Tibloy, AlSr10, PCu, ALCUP Phosporus rod and ALCUP 90 cutrod. We can deliver these products promptly. Please test our service. We would like to convince you with our service - as we have done with many others in the past.