Area systems - Import export

Pallet based automated car parking system RESPACE Pallet based technology The pallet based automated car parking system RESPACE is an interesting solution for creating up to 50 parking spaces. Drivers park their car on a pallet in a cabin. The cabin is the only interface between the driver and the car park. From this point everything is automatic. The door of the cabin closes and the car is transported downwards by lift. From there the car standing on the pallet is brought to a free parking space via roller conveyors. The pallet based parking system RESPACE is characterized by a very compact design. From the lift the pallets with the vehicles are moved directly to adjacent parking spaces. Car parking and removal follows according the puzzle principle. The car park has 60 parking spaces and is used as a hotel car parking, but also available to the public.

Palletless automated car parking system CUBILE Palletless technology The palletless fully automated car parking system CUBILE is a perfect solution for creating from 50 to over 1000 parking spaces. As no pallets are used for transporting cars, the system is very fast and efficient. Drivers park their car at ground level in one of the entrance cabins and receive a parking ticket. The cabin is the only interface between the driver and the car park. From this point everything is automatic. The cabin’s rolling gate closes and the car is transported below ground in a lift before it is collected by one of horizontal transfer vehicles and brought to a free parking space. In the palletless parking system CUBILE, the Lödige Shifter does the heavy lifting. This is an ultra-flat robot that drives underneath the car and lifts it up at the wheels to take it from the lift to the transfer vehicle and transport it to the parking space.

International patent registered for the CLEAN ROOM SYSTEM line (DIN EN ISO 14644-1) The CLEAN ROOM SYSTEM units are linear actuators with belt driven transmission and are specifically designed for Clean Room applications They are supplied with a certificate issued by the IPA Fraunhofer Institute in Stuttgard, which certifies compliance with class ISO 3 (DIN EN ISO 14644-1), or with class Fed Std 0.01 (FED 209 E). The system prevents particles from being discharged in the environment where the linear unit is located. This has been achieved by using a special straight seal that closes the horizontal opening where the slider moves, as well as by the operation of a 0.8 vacuum pump connected to 2 vacuum pipes located inside the drive head and the idle head. The system allows vacuum to be generated inside the unit so that any particles released when the system is operating are sucked towards the air filtration areas. Clean Room System linear actuators components are all made of...

With decades of know-how and worldwide expertise in the core areas of conveyor technology, robot systems, palletizing, depalletizing and automation, TRAPO AG presents itself as a renowned manufacturer and total systems supplier of conveyor systems, palletizing technology and packaging machines. Primary and secondary packaging such as cartons, trays, pails and more are palletized and depalletized. The machines in our systems impress with their flexibility, high performance and economic efficiency. We produce in Germany and set standards worldwide ranging from engineering contracts to automation. The palletizers of the HLP series operate with high and low inlet. The product range of the high-capacity layer palletizers is optionally equipped with a y-axis, rotary module or even a traversing axis — so that one or more palletizing stations can be operated as required.

Are you planning a gala or would you like to equip your entrance area with a personnel guidance system in general? Then the "Chrome" barrier stand with its high stability is a very high-quality alternative. Hang up a barrier cord if required and simply release it again. The angular knob is, in addition to the chrome-plated surface and the heavy base, another individual feature of the "Chrome" barrier stand.

Designed for integration in a control cabinet on top hat rail The weighing module WM-3 can be comfortably programmed using a PC tool. Data can be output to SPS, PLS, or ERP systems easily using the ports. The large number of ports ensures comprehensive system integration. Area of Use For weight recording, data output and control in logistics, in warehouse and process technology or for fill level checks Highlights Conception for the control cabinet System integration with high process security Programming via PC tool Multiple port options Product images and technical information could deviate and may not be available in your country.

OEM software solution for your Bizerba scales Our integration solution allows you to implement your software in a Bizerba scale. Metrologically relevant areas such as weight display, tare, unit price and final price come standard with our kit. Of course our metrological display can also be integrated in your POS system. Area of Use Integration of PC-based Bizerba scales: KH II XC K-Class flex Kiosk systems POS systems with weighing functionality Integration of checkout scales in POS systems

The CS400 Kiln Shell Imaging System relies on the MP Linescanner, which provides continuous, accurate and real-time thermal images and temperature measurements for moving processes. With the ability to scan up to 1024 data points in a single scan, the MP Linescanner can provide a complete picture of even the highest speed manufacturing processes, ensuring an accurate temperature reading. Key Features: Multiple kiln support Added ThermoView TV40 Thermal Imager support (Additional hardware required) Added Pyrometer support – including Mi3 and Endurance units – for Burn Zone and Shadow monitoring (additional hardware required) Analog and Digital I/O (Wago) “One brick” resolution hot spot detection, even in shadowed areas CS400 System Software The CS400 Kiln Shell Imaging System features specially designed software, which relies on standard Ethernet ports. Because the graphic user interface is designed specifically for kiln applications

Corrosion protection systems No space for rust & co. Protected during transport and storage The risk of corrosion is omnipresent during production, transport and storage as well as in many other situations. With our special systems you can now effectively protect your components. We develop different varieties of corrosion protection systems – we always have a solution that satisfies your individual requirements perfectly in this sensitive area. Features & benefits • Transport system (endless conveyor or material carriers) integrated in all systems • All systems equipped with dedicated oil supply • Precision heated oils for particularly smooth application • High-performance spray nozzle technology achieves a lasting, full surface application Design versions and details Our systems are designed to meet widely differing requirements as they arise during different phases of the production process as well as during subsequent material handling processes. Our offer includes the fol

Advantages Highest machining quality due to guaranteed filtration degree Varios qualities of filtrate achiveable within one filter system Area of application Filter aid-free filtration of coolants in various machining processes as in turning, drilling, milling, etc. Flow rate Various filter sizes and the modular design enable any required flow rate. Classification number - Filter aid without Filtration degree 30-100 µm Medium oil, emulsion and water Filter material filter cartridges

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Interest in our products? Contact us! Download product brochure Classification number - Filter aid with Filtration degree 30-40 µm Medium oil, emulsion and water Filter material non-woven fabric

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Interest in our products? Contact us! Download product brochure Classification number - Filter aid with Filtration degree 30-40 µm Medium liquids of the chemical industry Filter material non-woven fabric

Quick and reliable detection of all ferrous and non-ferrous metals in packaged and unpackaged piece goods. The compact metal detection system offers you safe performance and highest detection sensitivity. With its robust stainless steel conveyor belt construction the VARICON+ inspects piece goods of up to 50 kg. A very short metal-free zone (MZ) ensures interference-resistant, reliable inline metal detection. To suit the area of installation the system is available with a modular belt (wet area) or a flat belt (dry area). The conveyor belts are available with variable belt widths. The motor controller is fitted either with a conveyor stop in case of metal detection or an application-specific rejection system. For easy and thorough cleaning the VARICON+ series has a hygienic design. Quality which is reflected in BRC, IFS and HACCP certifications. The VARICON+ comes with IP65 protection. Higher IP ratings are optionally available.

Features • Ideal for crumbly and porous building materials • All-purpose character: also holds in mixed masonry, as is often the case in old buildings • Spreads in several directions and thus ensures secure anchoring and high holding values • Extra deep seating in masonry • Extending rotors prevent rotation in the drill hole • 100% nylon • Altbaujoker + screw: perfectly matched system Description & Area of Application • Multiple spreading by means of 2-way separated spreading elements offset by 90° • Movable rotors • Flexible wall plug neck • Large anchoring depth • Altbaujoker + Screw: Screw with TX drive

A double head mitre saw with disappearing blades specifically studied for the tubular steel shapes. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 45° and 135°. It is equipped with the system TS 690. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Speed of rotation of the blades, variable by means of a frequency converter (inverter). Automatic shifting of the support plates of the profile once over the cutting cycle. Dynamic protection guards for a total covering of the cutting area. Blade lubrication cooling system with electric pump. Coolant liquid vat with extractable pump for vat cleaning. Cutting deepth stop device. Intermediate workpiece support automatically operating Mobile roller conveyor with pneumatic clamp for section support Compressed air treatment unit (filter/reducer/lubricator)

with its compact design using a structural aluminum profile, conveyor system is ideally suited for continuous duty applications in multiple shift environments. using the benefits of modular construction, this conveyor can be readily integrated into new or existing equipment or be used as a freestanding conveyor for bulk handling and loading aplpications. inclination smoothly adjustable steplessly fourwheel drive, 2 steering wheels with parking brake 13 collector rollers, height 20 mm transport cover PUeven, 2 layers, to be used at temperatures from 30 120°C, oiland grease resistant, antistatic funnel (attachment), aluminium anodized drop area pivotable clip/aluminiumclosed bar system suitable for materials to be conveyed from a thickness of 2 mm on for lower thicknesses of materials to be conveyed, allaround corrugated material edges made from celloflex. This reduces the usable width of the material by approx. 70 mm

Big 3: Performance, Plug-In ® label and Quality Check Inside - more customer benefits for future requirements The weigh price labeller GLM-Ievo intelligently designed for automatic weighing and labelling of pre-packaged goods comes in different versions. The Weigh Price Goods Labelling System GLM-Ievo 170 will achieve over 170 packs per minute. Due to its modular design, it can be optimally configured for alternative products and offers exemplary performance requirements in the food production area. Thanks to the modular system of the weigh price labeller, there are no limits for todays and any future requirements you may have in the industrial food area. Besides its flexibility, this labelling system stands out in terms of robustness and an easy-to-clean design. With intelligent visual quality control and automated activation of process data via the new function Plug-In® Label operation it is easy to maintain and manage thereby reducing errors during the packaging...

With the laser cutting and engraving machine XL-1200 eurolaser offers the possibility to process extremely broad materials on a comparatively small system. The processing area is 2.270 x 1.230 mm (48,4 "x 89,3"). With the optional camera recognition system which is also available for other systems the production flow can be automated, leading to an increased economy of the laser processing.

With the laser cutting and engraving machine XL-1200 for acrylics eurolaser offers the possibility to process extremely broad materials on a comparatively small system. The processing area is 2,270 mm x 1,230 mm (89.3" x 48.4"). With the optional camera recognition system which is also available for other systems the production flow can be automated, leading to an increased economy of the laser processing. The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

The TNC-GG model series was developed to apply one or more labels to large cylindrical containers at the circumference. Instead of using „die-cut“ labels, it is also possible to handle continuous label material from the roll. Depending on the size of the product, the material is cut inside the system. The largest area of application for these systems is in the beverage industry, where beverage barrels (KEGs) are provided with a deposit banderol on the circumference and thus clearly indicate the owner of the returnable containers. Highly permanent label material is used for these applications, which can no longer be removed from the product without leaving residues. We also offer fully automated solutions for this.

LOGO.alu formwork is light and can be moved by hand, while possessing virtually all characteristics of a large area system. It is suitable for use on building sites where no crane is available.

- For contactless reading and writing of RFID chip cards - Used in e.g. refineries, tank farms, chemical industry, medical industry, food industry or power plants - Allows the build-up of intrinsically safe access control and identification systems - Application areas: loading at filling gantries, weighing, entry and exit area - High protection against rough environmental conditions due to sturdy aluminum housing (optional available as stainless steel housing) - Explosion protection according to European ATEX-standard 2014/34/EU BENEFITS - Type of protection IIC - Contactless reading - Tamper-proof by additional data encryption via a special Timm Elektronik card coding - Temporary data at chip cards can be saved and recalled - Individual, customer-specific coding possible

Like the slightly less powerful MA series, it is guaranteed absolutely exhaust-free hot air. In addition, the units can be operated not only with oil, but are also approved for gas operation. The operating mode can be flexibly adapted to the conditions on site. Thus, the devices can be used in all areas. Hot air hose systems can also be connected without any problems thanks to the high-performance radial fans. Consequently, effective heating from outside is also possible without any problems. The recirculation module ensures efficient and economical operation. The oil burner blowers are made of high-quality materials by renowned manufacturers. They work so efficiently that 93% of the energy can be converted into heat.

Your benefits Easy installation Cost effective Plug & play by crew No installation on shaft Maintenance free Expandable to fuel performance system Areas of application The Shaft Power Meter is the cost effective solution when reliable shaft power measurement is required. The system is easy to install and requires no electronic parts on the shaft. The system operates absolutely contact free.

The broad applications spectrum of SERVOLIFT milling and sieving equipment leads to flexible and user-friendly solutions in combination with handling systems. The areas of application stretch from controlled sieving in order to remove contamination from raw materials to fractionation, calibration to deagglomeration. Sieve mills, vibration sieve machines or inline sieve equipment in combination with mobile or stationary lifting systems provide a flexible, compact and easy-to-clean system. Size as needed Technical description Stainless steel or cGMP/FDA compliant designs Use as sieve mills (cone mills), hammer mills, oscillating sieve mills Various throughput depending upon the product and particle size Lifting height can be customized Broad control designs, from simple microcontrollers with digital displays to PLC controls Explosion-protected designs in adherence to Atex Zone 1/21 and 2/22.

A bio scrubber combines physical scrubbers with a biological activation unit. In this process, air polluted with a wide variety of pollutants is cleaned with the aid of a washing liquid which is loaded with microorganisms and biocatalysts (various enzymes) taken from nature. The washing water absorbs the exhaust air and pollutants from the air. Subsequently, added microorganisms oxidise them. These microorganisms use the air pollutants as substrate and nutrient medium and convert them into naturally formed decomposition products such as CO2, water, and biomass. Here, the washing water is continuously regenerated and used in a closedcircuit water treatment system. TYPICAL APPLICATION AREAS These plants are primarily used for watersoluble ingredients of the exhaust air. The usual pollutants that are filtered from the exhaust air with the help of bio scrubbers include aldehydes such as formaldehyde, alcohols, ketones and other hydrocarbon compounds.

Electrostatic Innovations from Eltex have been creating safety in hazardous areas for over 60 years: Controlled electrostatic grounding protects production sites and employees when handling highly flammable and explosive substances. Terrabox TCB030 is designed for direct installation in explosion hazard areas (Zone 1 or 21)and for connecting a clamp. Two clamps are connected when used for BIG BAG grounding. The dual-color indicator lamp signals the correct grounding state. The integrated contacts allow an enable circuit to be implemented.

Advanced laser shaft alignment in EX/ATEX areas ROTALIGN touch EX is Zone 1 ATEX/IECEX certified. Packed with userfriendly alignment features unique to PRUFTECHNIK, the ROTALIGN touch EX shortens the measurement time with Continuous SWEEP Mode for highquality measurement in only one shaft rotation Live Move function for simultaneous realtime machine corrections in both horizontal and vertical directions vertiSWEEP to measure vertical machines in one rotation of the shaft Cardan shaft rotatingarm bracket allows measurements to be performed without removing the shaft Soft Foot Wizard to diagnose soft foot problems Move Simulator lets the operator simulate shim values and horizontal corrections before moving the machine Have instant access to the critical data you need with full mobile connectivity.