Gel batteries - Import export

Ready-to-use Gel Batteries, designed to ensure adequate energy for vehicles equipped with high energy absorption devices, such as ABS, GPS, etc. Thanks to the GEL Technology, the batteries guarantee maximum performance in terms of safety and reliability in operation. The high resistance to vibrations make these batteries also ideal for applications on uneven terrain and off-road use. The service life of the battery, increased thanks to high performance during life cycles, and the almost zero self-discharge make it perfect for long storage periods. The construction features of these batteries allow high starting currents and high resistance to deep discharges.

Maintenance-free batteries which reduces the maintenance costs. - Provides exact solution for acid leaking problem, it can still operate even it is partially broken. - Gives perfect result under the vibrant conditions - It can be returned back from deep cycle status even it is not immediately charged - Low internal resistance - Produced with a design protecting the positive plates, for prolonging the life cycle. - Environment friendly; it allows the alternative energy sources to be stored for reuse. - ‘GEL ENERGY’; gel formula has the effect of decreasing the heat on plates. It cause neither heating nor lose power in the case of excessive discharge. Fields of Application - Industrial Vehicles - In solar power systems - As marine battery in boats, yachts and sea transportation vehicles - In wind power systems - In defense industry such as military tanks, panzers and sea boats - In ambulances - In disabled cars - In construction equipment - In inter-cit

Ideal Power Batterıes

Gel Leisure Bloc Battery

Gel Solar Bloc Battery

Gel Traction Bloc Battery

ELECTRICAL LIFTERS FPRX with single column and fully electric (lifting and handling) The indicated price includes 1 24V/70Ah battery and relative battery charger The FPRX elevators are very high quality elevators, available with lifting from mm. 810 or 1525, and with capacity up to 1000 Kg. The FPRX models can be ordered in the following versions: - Standard starter car batteries (lead-acid) - Gel battery (guarantee longer life and longer recharge cycles) - PRO version with GEL battery (proportional control of the forks, ergonomic tiller) - PRO version with Li-ION battery (Meets all storage needs) WARNING: all forklifts are tested one by one, before being packed and shipped, in a professional way and are complete with CE certification.

The FG PX series is the next series of robust and professional stackers suitable for high utilization during the working day. In fact they have 3 hours autonomy. Characterized by high quality, are equipped with electric feed and lifting. High maneuverability: agile and easy to use, comes with butterfly rudder for traction control.The position of the wheels always within the width of the vehicle allows to handle goods in narrow spaces and corridors. Double protection carter in ABS, guarantees a simple and quick maintenance of the battery. Available models: FGPX 12/25 capacity 1200 Kg lifting height 2410 mm - standard battery 24V/85Ah from starter cars (lead-acid) FGPX 12/29 capacity 1200 Kg lifting height 2810 mm - standard battery 24V/85Ah from starter cars (lead-acid) FGPX 12/35 capacity 1200 Kg lifting height 3410 mm - standard battery 24V/85Ah from starter cars (lead-acid) FGPX 12/42 capacity 1200 Kg lifting height 4110 mm - GEL battery 24V/105Ah

Self-propelled battery wrapper, suitable for wrapping with stretch film pallets with a maximum height of mm. 2050, also with an irregular shape. However, the base of the pallet must have a regular shape to allow the feeler wheel to follow its shape. Rotating automatically around the pallet, it wraps with stretch film or net. Equipped with rudder for manual steering with forward-reverse buttons, maintenance-free gel traction batteries, built-in battery charger, three-phase electric motors with inverter, height-adjustable guide wheel, front safety bumper. The FP GLOBO model is equipped with a folding arm with reel holder trolley.Keyboard lock Rotation speed adjustable from 5 to 12 rpm Up/down reel carriage speed from 1.3 to 5.4 m/min Turns at the base/top of the pallet from 1 to 10 Pallet height reading delay Film tension adjustment Film pre-stretch adjustment Reel change comfort cycle CYCLES SELECTABLE FROM

The robot stretch wrapping machine model. FP EASY ECO, battery-powered and automatic steering with overrunning side wheel (CE). Turning around the pallet automatically performs the film wrapping or network. Equipped with manual steering for driving forward and backward buttons, traction batteries maintenance-free gel, current transformer 24 V DC - 220 V AC, built-in charger, electric motors, three-phase inverter driving wheel height adjustment, front bumper security.Place the machine near the load to be wrapped Hook the film or the net to the load Select the wrapping program Press the start button The machine rotating around the load makes the winding and stops at end of cycle Cut the film manually Please note that the machine has a driving wheel side wheel to be placed in contact with the load, if the load surface or irregular shape must assess the suitability.

Battery-powered load lifting magnets are location-independent and flexible like permanent load lifting magnets and at the same time have the advantage of remote controllability and operability at the push of a button. They are mainly used where larger loads are continuously handled, as they can be switched without physical effort. Another common application is where access to the touchdown point is difficult. All our battery-powered lifting magnets are equipped with an IR remote control and a high-quality, deep discharge-proof gel battery. FBM load lifting magnets comply with the latest standard and have been designed according to the main criteria of safety and ease of use.

The 12 V/33 Ah rechargeable battery is recommended for use with the SES P4033 solar energy set. Maintenance-free, rechargeable lead-gel battery. Comes already charged and ready to use. Voltage: 12 V Capacity: 33 Ah Weight appr.: 12 kg Measurements: 195 x 130 x 155/180 mm

*12V @ 20Ah to 200Ah *Lead Acid AGM Accumulator *Full Gel Deep Cycle *VRLA Solar Battery *SLA SMF High Rate Rechargeable *Outdo Long Life Factory Battery

• IP65 Passive cooling; extruded aluminium-alloy housing • Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle • 5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based batteries • LED indicators showing corresponding charge status and errors • Protection against short circuit, reverse polarity, over temperature or overload • Battery recovery function for attempting to revive a deeply discharged or "dead" battery with recurring series of voltage/current pulses

•IP20 Load-dependent fan cooling; spray-painted metal housing •Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle •Battery "wake-up" function by sending out programmed "wake-up" pulses •Optimal and gentle charging for the greatest possiblity of charge cycles guaranteed with high frequent combinatorial circuit technology •5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based batteries •LED indicators showing corresponding charge status and errors •Protection against short circuit, reverse polarity, over temperature or overload

• IP20 Load-dependent fan cooling; spray-painted metal housing • Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle • Battery "wake-up" function by sending out programmed "wake-up" pulses • Optimal and gentle charging for the greatest possiblity of charge cycles guaranteed with high frequent combinatorial circuit technology • 5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based batteries • LED indicators showing corresponding charge status and errors • Protection against short circuit, reverse polarity, over temperature or overload

• IP20 Load-dependent fan cooling; spray-painted metal housing • Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle • Battery "wake-up" function by sending out programmed "wake-up" pulses • Optimal and gentle charging for the greatest possiblity of charge cycles guaranteed with high frequent combinatorial circuit technology • 5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based batteries • LED indicators showing corresponding charge status and errors • Protection against short circuit, reverse polarity, over temperature or overload

• IP65 Passive cooling; extruded aluminium-alloy housing • Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle • 5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based batteries • LED indicators showing corresponding charge status and errors • Protection against short circuit, reverse polarity, over temperature or overload • Battery recovery function for attempting to revive a deeply discharged or "dead" battery with recurring series of voltage/current pulses

• IP65 Passive cooling; extruded aluminium-alloy housing • Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle • 5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based batteries • LED indicators showing corresponding charge status and errors • Protection against short circuit, reverse polarity, over temperature or overload • Battery recovery function for attempting to revive a deeply discharged or "dead" battery with recurring series of voltage/current pulses

For motor vehicles starter battery (Lead acid / Gel / AGM / VRLA) No inrush current – optimized for use within industrial manufacturing lines 100% qualified for motor vehicles on-board electronic system / airbag Use as battery charger, power supply and motor vehicles energy supply in buffer mode (support during diagnosis / flash) Extensive protection functions and self-protection functions Short circuit and reverse polarity protection Protection against defective batteries Reliable sparking suppression Comfortable menu navigation / charging parameter configurable Built-in communication interface Sealed housing, protected against internal pollution Status indication via display and high power LEDs Menu navigation: English, French, German, Italian, Spanish Wide range of accessories e.g. external visualization of operating state (DBL-SIG-LR remote indicator), charging cable etc. Option: Customized charging parameters Option: Operation with low temperature until -40°C Option: Regeneratio

For motor vehicles starter battery (lead acid/Gel/AGM/VRLA batteries 100% qualified for motor vehicles on-board electronic system / airbag Comfortable menu navigation / Charging parameter configurable Use as battery charger, power supply and motor vehicles energy supply in buffer mode Extensive protection functions and self-protection functions Short circuit and reverse polarity protection Protection against defective batteries Reliable sparking suppression Built-in communication interface Sealed housing Housing version "B": Advantageous for industrial production lines Status indication via display and high power LEDs Menue navigation: German, English, Spanish, Italian, French Wide range of accessories e.g. external visualization of operating state (DBL-SIG-LR remote indicator), mains and charging cable Option: Customized charging parameters Option: Battery diagnostic system Option: Operation with low temperature until -40°C Option: Regeneration charging for deep discharged batteries

- IP68 Passive cooling; high-impact plastics housing - Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle - High frequency switching technology - 5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based batteries - LED indicators showing corresponding charge status and errors - Protection against short circuit, reverse polarity, over temperature or overload - Battery recovery function for attempting to revive a deeply discharged or "dead" battery with recurring series of voltage/current pulses

For motor vehicles starter battery (lead acid/AGM/Gel/VRLA) Use as battery charger, power supply and motor vehicles energy supply in buffer mode 100% qualified for motor vehicles on-board electronic system / airbag Extensive protection functions and self-protection functions Short circuit and reverse polarity protection Protection against defective batteries Reliable sparking suppression Comfortable menu navigation / charging parameter configurable Built-in communication interface Sealed housing Housing version "B": Advantageous for industrial production lines Housing option "M": Variant for mobile workshop applications Status indication via display and high-power LEDs Menu navigation: German, English, Spanish, Italian, French Wide range of accessories e.g. external visualization of operating state (DBL-SIG-LR remote indicator), mains and charging cable Option: Customized charging parameters Option: Operation with low temperature until -40°C Option: Regeneration charging for deep dis

For motor vehicles starter battery (Lead acid / Gel / AGM / VRLA) No inrush current – optimized for use within industrial manufacturing lines 100% qualified for motor vehicles on-board electronic system / airbag Use as battery charger, power supply and motor vehicles energy supply in buffer mode (support during diagnosis / flash) Extensive protection functions and self-protection functions Short circuit and reverse polarity protection Protection against defective batteries Reliable sparking suppression Comfortable menu navigation / charging parameter configurable Built-in communication interface Sealed housing, protected against internal pollution Status indication via display and high power LEDs Menu navigation: English, French, German, Italian, Spanish Wide range of accessories e.g. external visualization of operating state (DBL-SIG-LR remote indicator), charging cable etc. Option: Customized charging parameters Option: Operation with low temperature until -40°C Option: Regeneratio

•IP20 Load-dependent fan cooling; spray-painted metal housing •Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle •Battery "wake-up" function by sending out programmed "wake-up" pulses •Optimal and gentle charging for the greatest possiblity of charge cycles guaranteed with high frequent combinatorial circuit technology •5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based batteries •LED indicators showing corresponding charge status and errors •Protection against short circuit, reverse polarity, over temperature or overload

•IP20 Load-dependent fan cooling; spray-painted metal housing •Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle •Battery "wake-up" function by sending out programmed "wake-up" pulses •Optimal and gentle charging for the greatest possiblity of charge cycles guaranteed with high frequent combinatorial circuit technology •5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based batteries •LED indicators showing corresponding charge status and errors •Protection against short circuit, reverse polarity, over temperature or overload

•IP20 Load-dependent fan cooling; spray-painted metal housing •Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle •Battery "wake-up" function by sending out programmed "wake-up" pulses •Optimal and gentle charging for the greatest possiblity of charge cycles guaranteed with high frequent combinatorial circuit technology •5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based batteries •LED indicators showing corresponding charge status and errors •Protection against short circuit, reverse polarity, over temperature or overload

•IP65 Passive cooling; extruded aluminium-alloy housing •Microprocessor-based 4-Step charging technology with soft start and automatic re-start of the charge cycle •5 Selectable battery types (GEL, AGM, WET, Calcium, +PS-Mode) and built-in battery temperature sensor for models targeting lead-based batteries •LED indicators showing corresponding charge status and errors •Protection against short circuit, reveres polarity, over temperature or overload •Battery recovery function for attempting to revive a deeply recharged or "dead" battery with recurring series of voltage/current pulses

This mobile pallet turner is an electrically powered trolley with a maximum capacity of 1500 kg, operated by tiller controls and powered by a gel battery. It is an extremely versatile and compact device that allows the replacement of the pallet to be carried out in very confined spaces, thus not requiring an area to be dedicated in the plant. Falcon Wing is also available as a stationary machine. The mobile bench vault is equipped with the latest generation gel batteries with a duration of 8-10 hours. It is possible to increase the duration with larger batteries. In addition, to ensure that mobile devices have a non-stop operating cycle, we provide the optional “roll-on / roll-off”, a quick battery change system. All Toppy equipment are equipped with safety systems in order to prevent accidents at work, with particular attention to GMP standards to ensure the appropriate quality standards.