Results for
LBI
France
Centrifugally cast composite parts made up with a matrix in silicon-aluminum alloy and SiC reinforcement elements: Silicon Carbide particles. Characteristics of an ALUSiC® piece: - SiC reinforcement ratio ranging from 30 to 60% (in volume) depending on the application. - Perfect volume distribution of the SiC particles. Physical properties: - Low density (d ≤ 2.95). - Very low expansion coefficient (alpha < 8x10-6 with 60% SiC). - High thermal conductivity (> 150W/m/°K). Mechanical properties: - Very high stiffness (Proof stress > 185x10-6 N/mm² with 60% SiC). - Exceptional wear resistance. - Good mechanical properties under hot conditions (up to 300° C / 572° F). The non-reinforced zone has the characteristics of basic alloy.
Request for a quoteFEMIA INDUSTRIE
France
Precise control of the parameters and homogeneous processing of the product by maintaining the temperature through the entire thickness of the product layer for the time required for blanching (and even pre cooking) the processed products. High material yield by preserving as best as possible the organoleptic qualities of the processed products. Minimum water consumption according to the operating mode selected. Optimisation of the dimensions of the equipment according to the range of products to be processed and of the space constraints of the installation zone.
Request for a quoteFEMIA INDUSTRIE
France
Its unique, high performance design allows the full release of the smaller diameter green beans between the sorting bars. A very precise range of settings ensures product homogeneity, especially on extra fine sizes. The T43L and T46 models sort green beans into 2 sizes. The T44 model sorts in 2 3 sizes. For better user comfort, the T46 can be equipped with a remote adjustment system.
Request for a quotePAPETERIE DE MANDEURE
France
Dossier Jura, with its premium smoothness, brilliant shades, shows excellent printing results and converting properties. Range 180gsm and 250gsm White and colours Applications Folders Covers Dividers Inserts File boxes Forms
Request for a quoteNORELEM FRANCE
France
These precision slideways with roller bearings are used in machine and fixture construction, metrology, optical instruments and precision mechanics. The scale division on the micrometer dial is 0.02 mm. The stated permissible load values (F) are designed for a service life of 1 million travel cycles. The torque values apply only to centred slides. An additional centring hole is located at holes D2 and D3 on the top of the slide. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. F = permissible loading for dynamic and static loads. TI E/E1 = number of fastening holes E/E1/M inside. TA E/E1 = number of fastening holes E/E1/M outside. TI E4 = number of fastening holes E4/D1 inside. TA E2 = number of fastening holes E2/D1 outside.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NORELEM FRANCE
France
These precision dovetail slides find use in e.g. machine and fixture construction, metrology, optical instruments and fine mechanics. The stated permissible load rating (F) is for static loads. The torque values only apply for centred carriages. TI = number of fastening holes E1/E2/MI inside. TA = number of fastening holes E/E1/MA outside. TM = number of centring holes D1 inside. TN = number of centring holes D1 outside. Advantages An additional centring hole is located at all tapped holes. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. Quick and retrofit combination in the X, Y and Z axes.
Request for a quoteNORELEM FRANCE
France
The required torque is set by a set screw and a graduated scale. The set value can be secured using the lateral clamping screw. When the set torque is reached the grip audibly and palpably releases. The loosening torque is higher than the tightening torque so that the torque handle can be released without any problems. The internal thread version has a hole in the set screw so that the torque handle can also be used on threaded rods. Set torque accuracy ± 5%. On request: Other thread lengths.
Request for a quoteNORELEM FRANCE
France
Tempered, black oxidised. Precision diameters ground.
Request for a quoteAXON CABLE SAS
France
As a specialist in interconnect and process automation, Axon' Mechatronics, a sister company of the axon’ group, offers interconnect solutions such as precision presswork, loose or reeled parts. Solutions Taped and loose parts Pressfit and PIHR (Pin In Hole Reflow) terminals for SMD PC board Complex conductor strips Lead frame SMD terminals and components Terminals for insertion and wave soldering (standard brochure) Advantages Simultaneous engineering : engineering of products and process Integrated tool workshop : Wire and spark erosion machines, grinding machine Stamping presses from 15 to 100 ton Manufacture of parts from 0.1 to 2 mm thickness Processing of all types of complex material Prototyping Applications Industry Consumer electronics Automotive
Request for a quoteLEBRONZE ALLOYS
France
Lebronze alloys Group was born from the integration of different companies specializing in copper alloys, copper, nickel alloys, aluminium alloys, specialty steels, stainless steels, titanium and nickel superalloys. Thanks to a multidisciplinary know-how, the Group provides innovative solutions to all major industries such as Aerospace, Oil & Gas, Power, Railway but also in sectors manufacturing smaller equipment and products. Our 16 production facilities and 1,400 employees manage a unique range of metal processing technologies: continuous and semi-continuous casting, sand casting, die precision chill casting (manual, mechanized and automated), centrifugal casting, extrusion, ring rolling, hot and cold rolling, drawing, open-die forging, hot stamping, closed-die forging, cold forming, machining, non-destructive testing, etc. The Group’s commitment is to find appropriate and optimized solutions for every sector’s requirements.
Request for a quoteSPN SOCIÉTÉ DES PLASTIQUES NOBLES
France
Rings, gaskets, inserts, membranes, balls, washers... SPN machines simple and complexes parts for its customers from multiple area activities. SPN is involved in the production of batches from 1 to 10 000 parts. Positioned on technical plastics, our customer call on us for materials like : PCTFE, PFA, PVDF, FEP, ETFE and ECTFE (Fluoropolymers) but PEEK, VESPEL, POM, PA...
Request for a quoteK2TEC
France
At K2TEC, we have grouped under the term Precision woven filter fabrics mesh, all the fabrics made from extruded monofilament and woven in square mesh from nylon (polyamide), polyester, polyethylene, polypropylene, PTFE, etc. Thanks to the wide variety of precision woven synthetic fabrics available, the industrial applications of our mesh filter fabrics are extensive: from pregnancy test protective filters, to dishwasher filters, to insect anti-intrusion devices for smoke alarms or smoke detectors. These precision woven fabrics can also be used in rolls or ribbons for industrial sieving, and virtually in any kind of filter. Mesh openings can vary from 1 micron to 4000 microns, giving these mesh filter cloths the versatility to be used in many different liquid-solid separation processes. Mesh filter cloths are also used to protect strategic surfaces in the process of air filtration or sieving.
Request for a quoteResults for
Precision - Import exportNumber of results
13 ProductsCountries
Company type