Results for
NORELEM FRANCE
France
1. Screw the locking screw into the collar bush and fixture clamp and screw onto the baseplate. 2. The workpiece is clamped by tightening the fixture clamp with a spanner. Advantages: Compact design Quick and easy clamping of components Drawing reference: 1) Locking screw 2) Collar bush 3) Fixture clamp
Request for a quoteNORELEM FRANCE
France
1. Screw the locking screw into the collar bush, fixture clamp and clamping unit and screw onto the baseplate. 2. The workpiece is clamped by tightening the fixture clamp with a spanner. Advantages: Compact design Quick and easy clamping of components Pull-down effect Drawing reference: 1) Locking screw 2) Collar bush 3) Fixture clamp 4) Clamping unit
Request for a quoteNORELEM FRANCE
France
Body black oxidised. Thrust pin tempered and black oxidised. Drawing reference: M = ball pressure screw N = through hole for socket head screw DIN 912 1) rotation lock 2) screw rest 3) hexagonal nut
Request for a quoteNORELEM FRANCE
France
Slide hammer tempered and chromed. Shaft, stop and guide sleeve hardened and chromed. Note: These extractors are used to remove locating pins and centring pins (03105, 03106, 03107, 03108, 03325) with M3 - M8 tapped holes. Drawing reference: 1) stop 2) slide hammer 3) shaft 4) cross pin 5) lock screw 6) guide sleeve 7) cap screw 8) 1 set guide sleeves
Request for a quoteNORELEM FRANCE
France
Housing, plastic Contacts M8x1 gold-plated bronze. Contacts M12x1 Optaloy-coated brass. Version: Bush (female) Voltage: U max. 60 V Current: I max. 4 A Terminals: 3-pin (4-pin by M12x1) Security type: IP 67 Note: Plug connector for self-assembly with screw lock.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NORELEM FRANCE
France
Self-tapping threaded inserts for making high-strength, wear-free, vibration resistant screw connections in materials with low shear strength such as aluminium and aluminium alloys, brass, bronze, cast iron, duro and thermoplastics. The threaded inserts are tapered at the bottom and have a cutting slot. By screwing in they cut their own threads inside a receiver hole. This guarantees a completely secure and firm anchoring in the host material. Internal thread D1 acc. to ISO 6H. The threaded inserts with cutting slot spring slightly inwards in the slot region in some materials. This results in a screw locking effect. If this is not desired, we recommend the threaded inserts with a cutting bore.
Request for a quoteNORELEM FRANCE
France
Swing clamps are used where low clamping forces suffice or where the clamping point must be free when mounting and removing the workpiece. The block form of the housing offers universal fastening possibilities. The magnetic piston is primed for electrical end position feedback. Including screw and lock washer for fastening the clamping arms (accessories). The swing action of the clamp should not be blocked. F1 = at 6 bar (max. operating pressure).
Request for a quoteNORELEM FRANCE
France
Lockable five lobe grips prevent unauthorised loosening of the screw connection. The cylinder lock forms a positive lock between grip and screw. When unlocked the grip rotates freely without driving the screw, preventing unauthorised opening of the screw connection. The lockable five lobe grips are supplied with 2 keys each. The key can be removed in the open and closed position. The locks are a single-key system, i.e. the same key works in all locks.
Request for a quoteEBL POLYESTER
France
EBL offers a full range of products for horizontal wedging without nails or screws. Kala wedges optimize your coil storage and transport. With or without nails or screws, self-locking wedges are light and strong, reusable and recyclable.
Request for a quotePOUGET
France
USE : Locking Switches and Crossings. ADVANTAGES : Highly safe Equipment in forged steel (doesn't engage the Track Gauge). - Screw stroke : 100 mm - 10 Locking Positions - The Screw is made from hardened steel with a 120° pointed end. (small thread) - Pivoted Rear Shoe - Paint brown or yellow varnish - Overall Length : 40 x 20 x 10 cm - Weight : 5.7 Kg - Reference : 271 OPTIONS Trapezoïdal Threaded Screw (minimum quantity = 20 pcs.) - Ref. 271-FT
Request for a quotePOUGET
France
USE : Locking Switches and Crossings. ADVANTAGES : Highly safe Equipment in forged steel (doesn't engage the Track Gauge). - Screw stroke : 100 mm - 10 Locking Positions - The Screw is made from hardened steel with a 120° pointed end. (small thread) - Pivoted Rear Shoe - Paint brown or yellow varnish - Overall Length : 40 x 20 x 10 cm - Weight : 5.7 Kg - Reference : 271 OPTIONS Trapezoïdal Threaded Screw (minimum quantity = 20 pcs.) - Ref. 271-FT
Request for a quoteResults for
Locking screws - Import exportNumber of results
12 ProductsCountries