Results for
SEMIN
France
TECHNICAL DETAILS Paste coating for a good finish on interior walls and ceilings. Provides excellent surface preparation before painting or hanging coverings. COMPOSITION AND APPEARANCE Emulsion resin, calcium carbonate, rheological agent and various additives. SEMIN ENDUIT DE LISSAGE is a water-based coating. The paste is white in colour. COVERINGS • Wallpaper • Paint • Wall covering SUITABLE SURFACES Interior walls and ceilings • Plasterboards • Plaster tiles • Concrete • Cement coating TECHNICAL CHARACTERISTICS • Density of paste : 1.9 • Granulometry : fine • pH : 7 Adhesion : complies with NFT 30 608 PACK SIZE 4 and 10 kg buckets on shrink-wrapped pallet. APPLICATION Apply manually using a smoothing trowel or a filling knife. The maximum thickness will be 2 mm per coat. Allow to harden and remove imperfections before sanding, if necessary. Print the SEMIN ENDUIT DE LISSAGE if applying satin-finish or gloss paint. Clean tools in water.
Request for a quoteSEMIN
France
TECHNICAL DETAILS Interior ready-to-use smooth finish coating, easy to apply - requires less sanding down than a traditional coating and therefore creates less dust. Apply with spatula, then sand down. Less dust is created, and the dust is less volatile. SUITABLE SURFACES Interior walls and ceiling : plasterboards, gypsum blocks, concrete, cement coating, aerated concrete, sealants. REFERENCE DOCUMENTS DTU 59.1. PACK SIZE 25 kg bucket. AFNOR NFT 36.005 AMOUNT REQUIRED From 0.6 to 1 kg/m² depending on quality of surface. DRYING TIME 6 to 24 hours depending on conditions and quantity applied. RECOMMENDED APPLICATION To avoid all traces of filler, finish with a slightly rounded action.
Request for a quoteSEMIN
France
TECHNICAL DEFINITION SEMIN AIRLESS is an interior finishing coating designed for Airless projection. It is ideally suited to the preparation of pre-slabs, walled concrete and plasterboards before painting. COMPOSITION AND APPEARANCE Emulsion acrylic resin, mineral filler, cellulose derivatives, conservation agent and various additives. ACCEPTED SUBSTRATES • Pasterboard • Filling coatings • Old paintwork • Smoothed concrete • Plaster blocks SUITABLE SURFACES SEMIN AIRLESS can be covered with any acrylic or oil-based paint. TECHNICAL CHARACTERISTICS • Dry matter: 72% • Density: 1.6 PREPARATION OF SURFACES BEFORE APPLICATION The substrate must comply with DTU 59.1, i.e. be clean, dry, free of dust and of any trace of stripping oil. Plasterboard must be primed. APPLICATION SEMIN AIRLESS can be projected with any type of Airless type 695, 795 or Mark 5 machine, fitted with an Airless tremie and a size 21, 23 or 41 nozzle.
Request for a quoteSEMIN
France
TECHNICAL DEFINITION CE 78 PERFECT’LIGHT is a lightweight ready-mix paste specially formulated for jointing mitred-edge plasterboards in association with plaster tape. COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, lightweight fillers, preservation agent and various adjuvants. The paste is white. COVERINGS. Plasterboard primer. Smoothing filler. REFERENCE DOCUMENTS • CE marking • DTU 25.41 and DTU 25.42 • NF EN 13963 • DoP PACK SIZE 20 kg buckets on covered pallet. STORAGE 12 months in original unopened packaging away from frost and high temperatures. APPLICATION Before actual jointing, fill any accidental gaps between boards and any other areas (spalls, deterioration of the surface etc.). Apply manually by «buttering» the mitred-edge using a 10 or 15 cm plaster spatula and then adding the tape Then add a finishing coat, allow to dry and finish to hide the tape. Also hide the screw heads. For projecting vertical edges, use reinforced tape.
Request for a quoteMANNEQUINS SHOPPING
France
Pack of 10 Black Wooden Jacket Hangers - 44 cm Optimize the layout of your store with this pack of 10 high-quality black wooden hangers. These wooden hangers provide an elegant and professional presentation for your clothes, adding a touch of class to your retail space. - Material: Black wood - Dimensions: Length 44 cm - Hook: Metal
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MAVIFLEX
France
Characteristics of fold up door Mavimax EN 13241-1 safety Standard – EC Self supporting metal structure with polyester powder coated finish Safety straps system : 2 curtain lifting straps which are not required on normal mode (NF P 25-362 standard) Wind resistant : over 80 km/h Gearmotor directly inlet Reinforced frame for large size Curtain 900g/m² with reinforced wind bar Maximum clear opening dimensions : 60 m² – Beyond these dimensions, please consult us Automatic door >> High speed door special large dimensions Brochure
Request for a quoteMAVIFLEX
France
Characteristics of high speed industrial door Mavifold EN 13241-1 safety Standard – EC Opening: 1 m/s – closing: 0.5 m/s Self supporting mill galvanised steel frame with polyester powder coated finish Structure with unique Flexible track – Patent The curtain can be released for the side guides in case of impact Soft bottom edge technology -no more trouble with rigid bottom edge electronics Wind resistance : 100 km/ Hood/top roll and motor cover Option : semi automatic counterweight in case of power failure Maximum clear opening dimensions in mm : W 6000 x H 6000 Automatic door >> high speed door for outside application Brochure
Request for a quoteResults for
Finish coat - Import exportNumber of results
8 ProductsCountries
Company type