Results for
SEMIN
France
TECHNICAL DEFINITION Levelling filler for vertical substrates and for use on ceilings for poured concrete or pre-cast slabs. Ideal for the preparation of pre-cast slabs, formwork concrete and for the renovation of textured finishes or fibreglass with a paint finish. TECHNICAL CHARACTERISTICS • Dry extract : 75% • Density : 1.86 • VOC content : less than 1g/l COMPOSITION AND APPEARANCE Water, calcium carbonate, dispersant, bactericide, fungicide, cellulosic fibres, polyacrylates, clays, acrylic dispersant. AMOUNT REQUIRED From 2 to 4 kg for the first coat. From 1.5 to 2 kg for the second coat. APPLICATION SEMIN AIRLESS EXTREM filler is sprayed using the Airless pump or rotor machine/Flat spray stator in 2 coats. The first coat must be levelled using a 60 cm blade or levelled with a straight edge. After drying, the second coat must be smoothed using a blade.
Request for a quoteSEMIN
France
TECHNICAL DEFINITION SEMIN AIRLESS is an interior finishing coating designed for Airless projection. It is ideally suited to the preparation of pre-slabs, walled concrete and plasterboards before painting. COMPOSITION AND APPEARANCE Emulsion acrylic resin, mineral filler, cellulose derivatives, conservation agent and various additives. ACCEPTED SUBSTRATES • Pasterboard • Filling coatings • Old paintwork • Smoothed concrete • Plaster blocks SUITABLE SURFACES SEMIN AIRLESS can be covered with any acrylic or oil-based paint. TECHNICAL CHARACTERISTICS • Dry matter: 72% • Density: 1.6 PREPARATION OF SURFACES BEFORE APPLICATION The substrate must comply with DTU 59.1, i.e. be clean, dry, free of dust and of any trace of stripping oil. Plasterboard must be primed. APPLICATION SEMIN AIRLESS can be projected with any type of Airless type 695, 795 or Mark 5 machine, fitted with an Airless tremie and a size 21, 23 or 41 nozzle.
Request for a quoteSEMIN
France
TECHNICAL DEFINITION SEMIN AIRLESS 3 IN 1 is an indoor filler that can be used as an Airless spray. It provides an even appeareance without smoothing, has great coverage and a deep matt finish. It combines 3 actions : underlayer, filler and finish. COMPOSITION AND APPEARANCE Acrylic emulsion resin, mineral content, cellulose derivates, preservation agent and other additives. The resulting paste is a bright white colour and its consistency is adapted to its airless application. TECHNICAL CHARACTERISTICS • Dry extract : 68% • Density : 1,76 • COV : <1g/l APPLICATION SEMIN AIRLESSS 3 IN 1 can be sprayed with all kinds of Airless machines adapted to srpraying coatings. Recommended nozzle : 627. For optimum results, we recommend following this method : • Spray a first layer of the coating about 300 to 400 g/m2, to show up the defects on the surface. Spray at a distance of about 80 cm from the relevant surface • Check over the surface carrefully
Request for a quoteSEMIN
France
TECHNICAL DEFINITION SEMIN AIRLESS COVER is an indoor coating that can be Airless sprayed. COMPOSITION AND APPEARANCE Acrylic emulsion resin, mineral content, cellulose derivatives, preservation agent and various additives. The resulting paste is white and its consistency is adapted to its airless application. ACCEPTED SUBSTRATES • Fair-faced concretes. • Plasters boards. • Old droplets • Porous concrete PACK SIZE 25 kg. Plastic bags and tubs. SUITABLE SURFACES The SEMIN AIRLESS GARNISSANT layer can be applied with the help of an acrylic or gloss paint. TECHNICAL CHARACTERISTICS • Dry extract : 72% • Density : 1;88 • COV : < 1g/ litre APPLICATION SEMIN AIRLESS covering layer is sprayed in two steps : the first must be smooth with the help of a 60 cm blade, after drying the second one must be smoothed with the blade. The product must be sprayed at about 80 cm from the support. TIP : Lift filters before spraying.
Request for a quoteSAMES KREMLIN
France
Airless tips can be used on automatic and manual guns. Recommended for Sflow™ gun and ASI gun automatic gun ranges. Description Excellent finish Built with hard carbide Compatible with every Airless gun available on the market ► For configurations and part numbers, please refer to the Documents tab. Performance Transfert efficiency of 75% Optimum quality of spraying starting from 110 bar (1600 psi) Productivity All tips have the same consistent pattern and flow to guarantee a constant productivity Sustainability The carbide use is the hardest in the world to guarantee the longest lifetime possible. The Airless tips can be used on our Sflow™, ASI gun and every Airless gun of the market. Kits of pump plus hose & gun are available.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SAMES KREMLIN
France
With low pressure Airless tip, you decrease by 50% the pressure compared to standard tip. Particularly efficient on water based UV paint. Recommended use with our manual an automatic Airless range; Sflow manual gun and ASI automatic guns. Description Productivity of the airless at low pressure Built with double hard carbide insert Transfert efficency of 84% Performance Transfert efficiency of 84% Optimum quality of spraying starting from 85 bar Productivity All tips have the same consistent pattern and flow to guarantee a constant productivity Sustainability The carbide use is the hardest in the world to guarantee the longest lifetime possible. The airless tips can be used on our SFLOW manual gun, ASI automatic gun and all the Airless gun on the market.
Request for a quoteSAMES KREMLIN
France
This Flowmax® pump is recommended for feeding 2 guns. Description Flowmax® technology for zero maintenance Designed for moisture-sensitive and abrasive materials Extended lifetime ► For configurations and part numbers, please refer to the Documents tab. Performance: High output to feed several guns in circulation High suction power for materials up to 4,000 cps Turbo air motor also available for continuous 24/7 use Productivity: Flowmax® Bellows technology provides total sealing & is dust free - no lubricant cup Ideal for moisture-sensitive catalyst and UV products Sustainability: Triple chrome piston and cylinder, stainless steel ball & carbide seat for long term use Sleek design with fewer parts - inversion system provides a fast changeover for constant material delivery Bellows lifetime 10,000,000 cycles - up to 8 years No dynamic sealing for leak free technology
Request for a quoteSAMES KREMLIN
France
The Cyclomix™ Expert is an innovative, industrial solution that is configured to meet the needs of the customer. Description Capable of metering 1 component as well as mixing 2 and 3 component materials Flexible modular design - up to 24 programmable components PH version available for acid-catalyzed coatings Handles up to 50 recipes Constant flow technology Performance Production flush 5-step programmable sequence Weekend flush 6-step p rogrammable sequence Continuous ratio and pot life monitoring Multiple flow meter options available to meet your requirements Productivity Consistent finish quality Reduced labor - on demand mixing In-line static mixer reduces flushing solvent and faster color changes Reduced fluid waste Less rework Reduced hazardous waste Sustainability All stainless-steel construction compatible with most materials PH (acid catalyst) version available Filter/regulators assemblies are standard equipment, constructed of stainless steel compatible with most...
Request for a quoteResults for
Airless - Import exportNumber of results
9 ProductsCompany type