Cutting process - Import export

Automatic digital cut-off saw with Ø 550 mm front feed disc. 2-axis servo control

PRODUCT DETAILS Hydropneumatic disc feed. Protective housing with safety sensor. Cutting speed regulation. Cutting at any desired angle between -45° and +45°. Right and left cutting at fixed angles 0°, 15°, 22.5°, 30°, 45° . Movable mitre that increases cutting capacity. Vertical and horizontal pneumatic clamps. Cutting disc Ø 420 mm. Cooling system.

Two-head mitre saw with 450 mm diameter discs, with digital display. Designed to cut aluminium and PVC profiles of different angles and thicknesses. Provides hydropneumatically controlled angle positioning; while the heads that perform manual positioning at all other intermediate levels provide a perfect cutting operation.

"PRODUCT DETAILS FEATURES Manual cutting process Cutting at any desired angle between -45° and +45° Stepped cutting to the right and left, at angles 0° , 15°, 22.5°, 30°, 45° Manual clamps Manual cutting process Ø 400 mm disc"

550 mm diameter radial automatic cross-cutting machine – 2-axis servo control Ideal for aluminum, plastic and wood profile cutting processes.

Ideal for cutting processes of aluminium, plastic and wood profiles. Hydropneumatic cutting process Safe cutting with the cover equipped with a safety sensor Adjustable cutting speed according to the contour Cutting at any desired angle between -90° to +45° Cuts at fixed angles of -67.5°, -45°, -30°, -22.5°, -15°, 0° , 15°, 22.5°, 30°, 45° Cutting processes by means of a 180° rotating plate Increased cutting capacity with a mobile square Vertical and horizontal pneumatic clamps

FEATURES Fixed angle cuts -67.5º, -45º, -30º, -22.5º, -15º, 0º, 15º, 22.5º, 30º, 45º. Hydropneumatic cutting process. Cutting disc Ø 420 mm. 4 HP motor at 3,000 rpm 50/60 Hz. Cutting capacity at: 90º 230×150 mm. / 45º 173.5×150 mm. Cutting processes by means of a rotating plate at 180º. Automatic lubrication system. Total protection of the disc according to the standards for the prevention of accidents. High cutting accuracy. Robust construction which ensures its reliability. Service key. Manual measuring roller table 3,000 mm. (right side). Automatic lubrication system.

FEATURES Hydropneumatic cutting process. Safe cutting with double spring system and disc guard. Vertical and horizontal pneumatic clamps. Shock-resistant cast iron bushing. Cutting at any angle between -45º and +45º. Cutting speed adjustment according to the profile. Fixed angle cutting of 0o, 15o, 22.5o, 30o, 45o to the right and left. Ø 400 mm disc. Cooling system.

The Vega II MC aluminium, PVC and wood cutting machine is a high-quality cutting tool designed for professional carpentry, aluminium and PVC work. This machine is an excellent choice for those who need to cut materials quickly and precisely, thanks to its cutting-edge technology. Used for aluminium, plastic and wood profile cutting processes. The ergonomic design of the Vega II MC makes it easy to use and very comfortable for the operator. The machine has a movable arm with a locking system that allows angle cuts to be made, and a large work table to support the materials to be cut. In addition, the cutting-edge cutting machine has a graduated scale for precise measurement of the cut.

Automatic two-head cutting machine with 550 mm blade, with 3-axis servo control, is ideal for cutting aluminum and PVC profiles of different angles and thicknesses. It provides automatic positioning at all intermediate degrees between -22.5º and 45º, as well as providing a perfect cutting operation. It provides the process of cutting profiles with a minimum length of 400 mm and a maximum length of 4948 mm with a double head at the same time, being able to make cuts greater than the actual measurement of the machine. Thanks to the automatic horizontal and vertical clamps and the profile support unit, it increases the cutting quality while prioritizing safety.

The coil-fed laser offers great advantages in coil laser cutting processes with the help of the continuous coil-fed laser cutting system. With the aid of a perfect construction and advanced software of the coil-fed laser machine, we provide our customers with precision, accuracy, and the possibility of rapid production from the coil to the laser cutting system. Advantages of the coil-fed laser cutting machine: • Results with minimal waste • Lower electricity consumption • Reduced labor costs • High production capacity • Low maintenance cost • NO investment in tools required • Maximum cutting flexibility • Clean, precise, and continuous cutting • Cutting bed design according to customer demand • Possibility of special design in coil-fed laser machine

Glass cutting is a complex process requiring innovative technologies. Our lasercut technique allows many possibilities in terms of shape whether straight or rounded. Moreover, this step does not alter the resistance of the glass and provides highquality straight edges finish.

Ideal for trimming and scoring hidden airbag compartments on thermoformed skin. After the fabrication of IP skins through thermoforming, two separate fabrication steps are still needed before foaming. In the first step, the thermoformed skin will be trimmed in the external zone through punching or a blade cutting process. Depending on the requirements, this is where FRIMO's blade cutting equipment comes into operation. In the second step, the skin will be weakened in the airbag area by a blade. By using the new FRIMO FlexTrim Combi Trim Scoring machine, both steps can be realised at once. The skin is positioned in a common component fixture and finished with two different cutting tools. The new system concept, with its flexible design and layout possibilities, offers a variety of options for combinable process and operation groupings. As an example : one 2-station system with two robots, which are equipped with automatically exchangeable cutter heads, and where two different products

Ideal for trimming or scoring foils and skins FRIMO's scoring process technology was developed for producing hidden airbags in instrument panels. In contrast to composite component weakening in which the substrate, foam and skin are all weakened in one step, FRIMO prefers material specific single steps. The foil or skin is weakened by blade before foaming. The substrate and foam are separately weakened at the end, which can easily be integrated into the necessary component cutting process. Depending on the customer-specific requirements, this is where FRIMO punching machines or milling machines come into play. Compared to weakening entire composite components (for example, with a laser), a lower investment is required. For the weakening of leather parts for hidden airbags, FRIMO offers a patented process in which the skin is weakened by a rotating circular knife. This process guarantees high precision and odorless results with the shortest possible cycle times.

High-speed tool steel. Application: All types of cutting tools used to process carbon alloy structural steels.

High-speed tool steel. Application: All types of cutting tools used to process carbon alloy structural steels.

The quarter leg includes both the drumstick and the thigh. It ihas rich flavour and moist texture. Pure, without blood coats and hygienically processed cut. This portion of chicken is best for cooking spiced chicken, chicken roast.

TYP C 063 Cutting, stamping and bending device for radial components Description The device processes power transistors and diodes to the types of housing TO 92, TO 18, TO 126, TO 127 and TO 220 with a maximum of three radially running connections. However, other components can be processed (for example, LED). The cutting and bending of the connecting wires is carried out in one step and of course including cable strain relief in order to avoid axial forces on the component housing. When a component which is to be bent, embossed and cut, two processing stations are necessary. Components