Results for
PARSMEGA MAKINA
Turkey
CAPACITY: Varies between 12 tons/hour and 20 tons/hour, depending on the product to be bagged and the desired tolerance. (It is guaranteed to work with a capacity of 15 tons/hour for flour or products of the same character, with an average error margin of +-50gr. per sack.) SET VALUE: set value can be programmed individually by the user. WEIGHT DISPLAY: The weight display screen has 4 digits. FAST - SLOW CYCLE: There are two programmable set values in the system. And the filling kilos for these values can be entered separately. The slow speed transition program adjustment is automatically determined and adapted by the system to provide the most precise and fastest weighing. Optimum speed adjustment is made automatically according to the weighed flour type and silo level. TOLERANCE: Upper or lower tolerances can be programmed individually. If the weighing result is outside these tolerances, flour is not loaded into the sack from the weighing bunker without
Request for a quoteWEBER FOOD TECHNOLOGY GMBH
Germany
Sharpener KSG processes the blades gently with short setup times thanks to its intelligent sharpening technology. The sharpening unit is positioned via a visor. Sharpener KSG guarantees rapid, reproducible sharpening and has a long service life thanks to the sharpening disks which are not actively driven. A counter is integrated for individual specification of sharpening cycles. Advantages Long service life thanks to non-actively driven sharpening discs Sharpening unit positioning via sighting tool Gentle processing due to clever sharpening technology Quick, reproducible sharpening Counter for the individual specification of sharpening cycles Short set-up times Simple operation Clear, robust technology
Request for a quoteSTÄHLE GMBH
Germany
Actuator for precise operation of accelerator handle of motor cycles and 3-wheeler. External set-point of the scaled pedal position via analog voltage. Simple positioning of stnad to bike - fast and simple attachment to gas handle. Temperature resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation. The system can be expanded by additional actuators for brake and clutch. Other interfaces like field bus can be offered.
STÄHLE GMBH
Germany
Actuator for precise operation of accelerator handle of motor cycles and 3-wheeler. External set-point of the scaled pedal position via analog voltage. Fast, simple and robust installation on driver seat / saddle. Temperature resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation. The system can be expanded by additional actuators for brake and clutch. Other interfaces like field bus can be offered.
IMS - INTEGRATED MECHANIZATION SOLUTIONS BV
Netherlands
Quality control and testing is the most important step in the production cycle. Aiming to meet the set requirements for production. Ensure product quality and sustainability by implementing good quality control methods. As machines are busy manufacturing, there are multiple parameters that can influence the product quality. Certain factors include humidity, adhesives, board styles or flute types. Based on these parameters, product recipes must be adapted to meet the requirements. To measure cardboard strength, large EOL testing machines are used for quality control. By using a portable, easy to use cardboard tester for bend strength, cardboard can be adequately tested at any location.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
REP INTERNATIONAL
France
REP Net 4.0 is a software that belongs to REP Pack 4.0. 4th generation of presses network, since the 1st version in 1987 and still compatible with previous generations of presses. REP Net 4.0 fits into Industry 4.0 and provides Cycle traceability (set value, measured value, compound, operator, SPC calculation) Centralizing and mold settings transfer Modelling the workshop, help for production management
Request for a quoteDAREVIE
China
Standard 3 Rear Pocket Big Shortage Space double Reflective Stirp, Safe Night Riding antislip Gel Strip Hem, Worryfree Riding place Of Origin guangdong, China brand darevie product Name short Sleeve Cycling Jersey & Bib Shorts model No. dvj131 & Dvp131 gender & Age men size 2xs4xl. All Sizes Available For Customization product Level basic season Or Weather without Fleece main Color green, Madium Aqua Marine, Orange Red, Yellow
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Application specific ring sets Improved properties are: Extrusion resistance, if high pressures have to be sealed and/or bigger gaps than the normally recommended max of 25 of the packing size are found. Wiper function, if any micro scaling is found on the stem and at reciprocating movement with control valves Blow out safety, when sealing high compressed gases and fumes Pliability, with low gland forces as well good reset and adaptability for example in applications with temperature cycles. Ring Set 3335 For Control Valves up to 400 °C. Ring Set 6655 For Control Valves and staem applications up to 600 °C steam. All rings are delivered as standard in skive cut. Ring Set 6660 For Valves up to 650 °C steam. This ringset offers minimal volumeloss. The rings in the sealing zone are split as standard in 2 halves or as option delivered with a skive cut. Top and bottom ring are delivered with skive cut. Soot Blower Ring Set For soot blower applications with steam temperature up to...
Request for a quoteYILMAZ MACHINE
Turkey
PRODUCT INFORMATION KP 120 machine is designed and constructed for the hydraulically crimping and correct assembly of aluminum profiles. The machine is semiautomatic and the machining cycle of various units are manual controlled by user who always stays outside of the dangerous area. It is designed through the pneumatically crimping system Steel construction of the machine table that is strong and lasting Practically adjustment of the knives according to the shape and height of the profiles Practically adjustment of the cylinder feed and profile stops by means of the millimetric ruler The machine is equipped with the pneumatic (for clamps ) and hydraulic (for crimping ) foot pedals for the operation control during the machining cycle Double-acting centering set-square returns to the home position under the table after crimping Powerful hydraulic pump with 2 x 5 tons capacity Protection plates made of Polyamide material to prevent being scratches on the profile surface
Request for a quoteWALTHER TROWAL GMBH&CO.KG
Germany
FULLY AUTOMATIC CENTRIFUGATION FOR CLEANING YOUR PROCESS WATERThe PLC-controlled peeling centrifuges of the ZA range are your reliable aid for fully automatic process water cleaning. The sludge is separated in a rotating drum and automatically peeled off into a sludge tank. You can set the cleaning cycles individually. MODULAR DESIGN FOR INDIVIDUAL SOLUTIONS The ZA range features a modular design, allowing you to flexibly adjust it to your needs. Select the dirt and process water tank, available in a range of sizes, as well as the additional process water pumps, dosing units or a heat exchanger, suitable for both the ZA 04 and ZA 06 configurations. THE BENEFITS AT A GLANCE Centrifuges with up to 2,417 times the acceleration of gravity PLC for fully automatic operation Two configurations: ZA 04 with a cleaning power of 1,000 l of process water per hour ZA 06 with a cleaning power of 2,000 l of process water per hour
Request for a quoteAPEX TOOL GROUP GMBH
Germany
The new Cleco TULMan Electronic Counter is a universal product designed to effectively manage pneumatic tools, allowing users to monitor tool usage, and implement preventative maintenance. The TULMan Electronic Counter enables maintenance intervals or calibration checks to be set based on cycles or run time. A yellow LED light warns when the cycle or run time limits are near, while it turns red when cycle or run time limits have been reached. The electronic counter can also allow users to track tool usage or compare product usage among different operators to improve productivity and processes.
Request for a quoteSTRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP C 055/S Universal Cutting and Forming Device for radial components Description The Device Type C 055 S was developed espacially for the moderate cutting and forming of components with axial or radial leads (incl. ICs). Cutting and forming the leads will be done in one working cycle. Changing the die sets takes no longer than 5 minutes. Components
Request for a quoteHEGEWALD & PESCHKE, MESS- UND PRÜFTECHNIK GMBH
Germany
Entire testing according to EN 1957 in one test stand possible No falsification of measured values because no rearrangements or transport of the mattresses and cushion frames between the durability test and the measurement of the hardness values H and HS are necessary The system can also be used for tests according to ASTM F1566 (necessary accessories: corresponding pressure plate for hardness testing, roller for tests according to ASTM F1566) The adjustable testing table frame guarantees a high flexibility for specimens of different sizes Flexible test parameter entry (e.g. number of cycles, test load) Automatic shutdown of the machine when the pre-set number of cycles is reached Exensive testing and evaluation software Alternative: Single test stand for durability tests on mattresses, spring cores and (box spring) beds according to EN 1957/ASTM F1566 Single test stand for the hardness measurement on mattresses, spring cores and (box spring) beds according to EN 1957/ASTM F1566
Request for a quoteMISTEC MALTA
Malta
A reliable, powerful and quiet pump EN - These series of professional high pressure pumps are the suitable solution with high quality and safety standard for all requirements to build professional misting systems with flow rates ranging from1 up to 6 l/minwith single phase electricmotor. High quality components like ceramic pistons, brass head, long lasting professional seals, assure smooth operation and a longlasting reliability. Our built-in digital timer offers full control of the efficiency of the misting system by direct adjustment of the frequency of mist spray increasing the advantages on water and energy consumption with savings up to 70%if compared to standard systems. This pump is suitable for small and medium humidification systems thanks to the special programming of the built-in timer that allows you to set work cycles in seconds and pause cycles in minutes. QES electrical motors assure the full efficiency with lowest power consumption and low noise operation.
Request for a quoteMSQUARE
Germany
RedZero is a smart control device to operate resistance heating blankets. Due to its compact design, this control unit is perfectly suited for the in-field repair of composite structures. The RedZero can be monitored remotely using its own WLAN via an intuitive graphical user interface. Using an app, the heating cycle can be set and adjusted as well as saved data can be downloaded using any mobile device (smartphone, tablet, laptop). This not only facilitates the documentation, but also serves as a quality assurance. The RedZero is the perfect addition for simple heating processes.
Request for a quoteResults for
Cycling set - Import exportNumber of results
16 ProductsCategory