Cooling hose - Import export

For production in the steel, foundry and glass industries. Temperature resistant from -30 ° C to + 120 ° C. Highly flexible, hot water resistant version. Construction: Abrasion-resistant tube Tension and pressure-resistant fabric inlays Abrasion-resistant, self-extinguishing cover Interior and exterior smooth, fabric patterned optional with heat protection levy of fiberglass (up to + 240 °C) or silicate (up to + 800 °C) Dielectric strength> 6 KV electrically non-conducting R> 109 Ohm Supplied by the roll or cut to length. Also available as spiral hose. Other versions and dimensions on request.

With tube-to-tubesheet weld heads, it is possible to achieve consistently high-quality, reproducible welding of tubes to tubesheets, with or without additional wire. The tubes to be welded can be flush with the tubesheet, offset, protruding or behind the tubesheet. The RBK 38 S and the RBK 60 S are our two new tube-to-tubesheet weld heads. The RBK 38 S is a small, handy water-cooled head for welding tubes to tubesheets up to an ID of 36.7 mm, without additional wire. Package includes: — Weld head — Water-cooled hose package, 6 m — Pull bar B — Gas hood ID 35 mm — 0° electrode holder — Transport case Optional: — Div. electrode holders for RBK 38 S — Div. gas hoods for RBK 38 S — Div. spring sleeves and pull bar sets for RBK 38 S

The RBK 60 S is an extremely robust water-cooled weld head for a standard heat exchanger application up to an ID of 60 mm, modified to an ID of 99 mm or 120 mm. The head is pneumatically centred and is available with a rotating wire device and/ or arc voltage control (AVC) as an option. The head can also be used with a pneumatic positioner instead of a balancer. Versions: — RBK 60 S weld head with pneumatic centring, including hose package, 8m, water-cooled — RBK 60 S weld head with pneumatic centring and wire feeder incl. hose package, 8m, water-cooled — RBK 60 S weld head with pneumatic centring, wire feeder and AVC incl. hose package, 8m, water-cooled Package includes: — Weld head — Small torch incl. torch consumables and tungsten electrode Ø 2.4 mm — Water-cooled hose package, 8 m — Pull bar B — Transport case Optional: — Div. spring sleeves and pull bar sets for RBK 60 S — Torches, Balancer, Tube-to-tubesheet positioner...

Open weld heads are clamped on one side of the weld joint. During welding, the gas- or water-cooled torch with hose package rotates around the tube. Advantages of open weld heads: — Robust design — Extremely easy to use — Option of using additional wire — Stepless tube size range — Torch bracket has 90° tilting function Weld head \ Tube size range mm \ inch \ weight \ item number OSW 40 \ OD 8 - 40mm \ 0.394" - 1.575" \ 2kg \ 1.3.1001 OSW 80 \ OD 10 - 76.2mm \ 0.394" - 3.000" \ 3kg \ 1.3.1101 OSW 115 \ OD 20 - 114.3mm \ 0.787" - 4.500" \ 4.5kg \ 1.3.1201 OSW 170 \ OD 40 - 168.3mm \ 1.575" - 6.626" \ 6.5kg \ 1.3.1301 OSW 275 \ OD 88.9 - 273mm \ 3.500" - 10.748" \ 16kg \ 1.3.1401 \ rotor can be decoupled Package includes: — Weld head — Integrated start/stop button on the handle — Top jaw — OSW torch bracket (with roll scanning in the case of OSW 275) — Mechanical headway control Optional: Angular gearbox for OSW on request

•Super compact (147 x 238 mm) – fits everywhere •Powerful airflow thanks to a re-designed aeration module •Automatic switching on when removing the handgrip from holder •8 mins automatic safety timer •“Cool touch” swivel handgrip •Extensible hose (up to m 1,20) •Easy wall-mounting without opening •2 possibilities of electrical wiring: direct connection to electrical mains (hardwire), connection with plug (softwire) •Fixation screws and screw anchors included •Protection class: IP34

Made in Germany IBK blast furnace hoses were developed in collaboration with the steel industry. The special structure lends our hoses great reliability under demanding conditions of use. Description - Developed for high-temperature load - Ideal cooling water hose for use at blast furnace - The plies of rubber, glass fiber and stainless steel provide a long service life and a high reliability under extreme operating conditions - Highest resistance to radiant heat and flames, confirmed by TÜV NORD Tube - Black smooth extruded inner layer of EPDM - Suitable for treaded and not treaded cooling water - Electrically conductive (R < 10^6 Ω) Reinforcement - Braided reinforcement in stainless steel (1.4401 / AISI 316) - Heat protection plies in braided glass fiber - Several intermediate layers Cover - EPDM outer layer, black, antistatic (R < 10^6 Ω), fabric textured, flame retardant and self-extinguishing, resistant to abrasion, ozone, weather and high temperatures

The eldec MICO-L generator offers users a particularly powerful complete solution that includes a coolant system. Medium (18 to 80 kW) and high-frequency devices (15 to 35 kW) are available. High-performance complete solution for cost-effective induction heating The L in the name of these induction heating systems stands for “large”. In the medium-frequency version, the MICO-L delivers up to 80 kW for hardening and heating parts and components. This powerhouse comes with a generator, cooling system, controller, and hose bundle. It can be moved on casters as an option (a base plate for stationary use is always included) and is therefore available at all times. Inside, carefully selected high-performance components ensure safe and precise heating processes. The reliability and efficiency of these devices is the result of decades of development and optimization by eldec.