Results for
YINGXINYUAN INT'L (GROUP) LIMITED
China
Power driver modules provide the physical containment for power components, usually IGBTs and MOSFETs in a half bridge or one-, two- or three-phase configurations. Power semiconductors or dies are soldered or sintered on a substrate that carries the power semiconductors and provides electrical and thermal contact and electrical insulation where needed. Power modules provide a higher power density and are in many cases more reliable and easier to cool.
Request for a quoteYINGXINYUAN INT'L (GROUP) LIMITED
China
Yingxinyuan International (Group) Co., Ltd. was established in 2001. It is one of the largest authorized agents and distributors of electronic components in the world. Its headquarter is located in Shenzhen, China, and it has branches and warehouses in Hong Kong and Taiwan. The company distributes and represents more than 700 brand manufacturers, and there are more than 3 million categories of spot products in warehouses all over the country for a long time, and they can be shipped within 24 hours. The products we promise to sell are guaranteed to be brand new, original and authentic products and provide 365-day warranty service. Please contact our sales team or send the model and quantity you need to yingxinyuan@yxsmd.com.
Request for a quoteYINGXINYUAN INT'L (GROUP) LIMITED
China
Yingxinyuan International (Group) Co., Ltd. was established in 2001. It is one of the largest authorized agents and distributors of electronic components in the world. Its headquarter is located in Shenzhen, China, and it has branches and warehouses in Hong Kong and Taiwan. The company distributes and represents more than 700 brand manufacturers, and there are more than 3 million categories of spot products in warehouses all over the country for a long time, and they can be shipped within 24 hours. The products we promise to sell are guaranteed to be brand new, original and authentic products and provide 365-day warranty service. Please contact our sales team or send the model and quantity you need to yingxinyuan@yxsmd.com.
Request for a quoteYINGXINYUAN INT'L (GROUP) LIMITED
China
Yingxinyuan International (Group) Co., Ltd. was established in 2001. It is one of the largest authorized agents and distributors of electronic components in the world. Its headquarter is located in Shenzhen, China, and it has branches and warehouses in Hong Kong and Taiwan. The company distributes and represents more than 700 brand manufacturers, and there are more than 3 million categories of spot products in warehouses all over the country for a long time, and they can be shipped within 24 hours. The products we promise to sell are guaranteed to be brand new, original and authentic products and provide 365-day warranty service. Please contact our sales team or send the model and quantity you need to yingxinyuan@yxsmd.com. We will reply to your message as soon as possible.
Request for a quoteYINGXINYUAN INT'L (GROUP) LIMITED
China
Yingxinyuan International (Group) Co., Ltd. was established in 2001. It is one of the largest authorized agents and distributors of electronic components in the world. Its headquarter is located in Shenzhen, China, and it has branches and warehouses in Hong Kong and Taiwan. The company distributes and represents more than 700 brand manufacturers, and there are more than 3 million categories of spot products in warehouses all over the country for a long time, and they can be shipped within 24 hours. The products we promise to sell are guaranteed to be brand new, original and authentic products and provide 365-day warranty service. Please contact our sales team or send the model and quantity you need to yingxinyuan@yxsmd.com. We will reply to your message as soon as possible.
Request for a quoteYINGXINYUAN INT'L (GROUP) LIMITED
China
Diodes - Rectifiers - Arrays Products within the diode and rectifier array family incorporate two or more discrete diodes within a single package. They are characterized in terms similar to those used for single discrete diodes, with the addition of a "Diode Configuration" attribute indicating the presence and character of any internal connections between the diodes in the device. Note that arrays with a full-bridge configuration are specifically excluded, and listed as a separate product family.
Request for a quoteYINGXINYUAN INT'L (GROUP) LIMITED
China
Yingxinyuan International (Group) Co., Ltd. was established in 2001. It is one of the largest authorized agents and distributors of electronic components in the world. Its headquarter is located in Shenzhen, China, and it has branches and warehouses in Hong Kong and Taiwan. The company distributes and represents more than 700 brand manufacturers, and there are more than 3 million categories of spot products in warehouses all over the country for a long time, and they can be shipped within 24 hours. The products we promise to sell are guaranteed to be brand new, original and authentic products and provide 365-day warranty service. Please contact our sales team or send the model and quantity you need to yingxinyuan@yxsmd.com.
Request for a quoteYINGXINYUAN INT'L (GROUP) LIMITED
China
Audio Special Purpose are a semiconductor device designed to filter, drive, amplify, convert, and interface an audio signals. The characteristics are function, applications, number of channels, interface, voltage, and specifications. The applications include audio systems, automotive audio, consumer audio, musical instruments, professional audio, communication systems, telecommunication systems, digital audio, driver, pre-amplifier, signal mixing, signal processing, voice trigger solution, or 10 Base-T.
Request for a quoteYINGXINYUAN INT'L (GROUP) LIMITED
China
Yingxinyuan International (Group) Co., Ltd. was established in 2001. It is one of the largest authorized agents and distributors of electronic components in the world. Its headquarter is located in Shenzhen, China, and it has branches and warehouses in Hong Kong and Taiwan. The company distributes and represents more than 700 brand manufacturers, and there are more than 3 million categories of spot products in warehouses all over the country for a long time, and they can be shipped within 24 hours. The products we promise to sell are guaranteed to be brand new, original and authentic products and provide 365-day warranty service. Please contact our sales team or send the model and quantity you need to yingxinyuan@yxsmd.com.
Request for a quoteXIAMEN NINESUN IMP. & EXP. CO., LTD
China
Place of Origin: China Base Material: FR-4 Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ Board Thickness: 0.8mm Min. Hole Size: 0.1mm Min. Line Width: 0.065mm Min. Line Spacing: 0.065mm Surface Finishing: HASL Application: Electronics Device Type: Customizable Solder mask: Black Material: FR4 CEM1 CEM3 height TG Color: Red Blue Green Black Testing Service: 100% Supply Ability: 25000 Square Meter/Square Meters per Month
Request for a quoteXIAMEN NINESUN IMP. & EXP. CO., LTD
China
Application SMT, BGA, CSP, Flip Chip, LED Detection, Semiconductor, Packaging components, Battery Industry, Electronic components, Automotive parts, Photo-voltaic, Aluminium Die-casting, Moulding Plastic. Ceramics, other special industries.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV Solar(PV) Power Protection Fuse 1500VDC This series of specifications for the use of the physical, rated working voltage 1500V, rated current 2A-50A electric line for overload or short circuit protection. Rated breaking capacity 20KA, products comply with IEC60269-1/GB13539-1 and IEC60269-6/GB13539-6 standards, and size for 10*85 or 10/14*85mm.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV surge protective device AC Surge protection device(SPD) is an indispensable device for lightning protection of electronic equipment. It is used to limit the instantaneous overvoltage of the power line and signal transmission line to the voltage range that the equipment or system can withstand, or A powerful lightning current drains into the ground to protect the protected equipment or system from impact and damage.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV miniature circuit breaker enclosure box Features: IP66 waterproof; Easy operation; Exquisite design; Highly waterproof and dustproof; Flame-resistant Material.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV surge protective device DC SPD protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.High energy MOVs equipped with specific thermal disconnectors and related failure indicators.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV MCCB DC The moulded case circuit breaker has the protection devices of over load, short circuit and under voltage, it can protect the circuit and power equipment from broken. The MCCB has the features of small volume, high breaking capacity, short electric arcing and anti-vibration. It is the ideal product for application in land and ship.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV Solar fuse holder din rail 1000VDC NSDF38 type Features: Replaceable fuse; Flame retardant shell; A range of 10x38mm fuse links specifically designed for protecting photovoltaic strings; With mounting rails.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SHENZHEN TENKING TECHNOLOGY CO., LTD.
China
Plastic and TPU car holder, 360 ° swivel and universal to hold your phone while driving. Simply clip the bracket to the vent and put your mobile phone (up to 7 pouces) on it.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV MCCB DC The moulded case circuit breaker has the protection devices of over load, short circuit and under voltage, it can protect the circuit and power equipment from broken. The MCCB has the features of small volume, high breaking capacity, short electric arcing and anti-vibration. It is the ideal product for application in land and ship.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV Terminal block 2P-20P Features: Heavy duty, corrosion resistant screws.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
● The junction box uses the PPE/PA,High rigidity, high temperature resistance chemical resistance, wear resistance and pollution resistance ● The junction box uses the glue to seal, the waterproof effect is better, the fitting interior heat is better. ● This junction box is a three-part design, and the cable adopts horizontal outlet mode, which can reduce the cable bending stress, save the cable usage, reduce the power loss of PV module, and divide the influence of "hot spot effect" into three parts. The influence of high temperature on photovoltaic modules is reduced. ● The diode and the terminal adopt an integrated packaging mode, and the terminal uses red copper
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV Solar(PV) Power Protection Fuse 1000VDC NSPV-25 type This series of specifications for the use of the physical, rated working voltage 1000V, rated current 1-30A electric line for overload or short circuit protection which comply with IEC60269-6 standard.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV 1500VDC Solar PV din rail fuse holder NSPV-63T type Features: TUV certified; High voltage and high current; Suitable for fuse 10/14*85mm; Standard IEC60269-6.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV 1500VDC Solar PV din rail fuse holder NSPV-50L type Features: TUV approved; High voltage and high current; Suitable for fuse 10/14*85mm; Standard IEC60269-6.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV Stainless steel cable ties They have an unique ball locking with Plastic jetting mechanism that allow easily and quickly installed and High tensile strength; Non-flammability. Stainless steel cable ties are a quick effective way of securing cables.They can be used in virtually all indoor outdoor,heavy industrial and underground applications.
Request for a quotePEEKCHINA CO., LTD.
China
Material: Amorphous, Semi-crystalline and Mineral Filled Semi-crystalline. PEEK (polyetheretherketone) Film Provides: ● High Temperature Performance ● Excellent Tribological Properties ● Broad Chemical Resistance ● High-Strength & Toughness ● Electrical Stability & Radiation Resistance ● Low Smoke & Toxic Gas Emission ● High-Purity, extremely low extractables Appication: ● Micro speaker diaphragm, dome tweeter. ● Presslire exchanger and senior oliaphragin. ● Aerospace high-speed rail insulation and TAB heat insulation components. ● Thrust washers for micro motors, gaskets for automobiles. ● High-temperature resistant label, pressure sensitive tape substrate. ● Insulation layer of electric vehicle battery. ● Flexible film surface heater. ● Wire, cable, insulation and wrcop sheaths.
Request for a quoteSHENZHEN TENKING TECHNOLOGY CO., LTD.
China
EASY AND PORTABLE TAKING FOR UNIVERSAL USE
Request for a quoteSHENZHEN TENKING TECHNOLOGY CO., LTD.
China
Built-in advanced infrared sensor, auto clamping firmly once place your phone. Mount on air vent or installed on dashboard with the suction cup. 10W fast charging with a Type C cable. Compatible with all mobile phones with Qi wireless charging function.
Request for a quotePEEKCHINA CO., LTD.
China
Manufacturing Process CNC Machining & Injection Molding PEEK performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK Produced from virgin polyetheretherketone resin and offers the highest toughness and impact resistance of all types. ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK Carbon fiber reinforcement lends the material a high level of rigidity and creep strength, high mechanical strength and heat conductivity values. ARKPEEK-GF30: 30% glass fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite high performance engineering plastic with product characteristics including excellent sliding and abrasion & wear resistance, high mechanical.
Request for a quoteResults for
Components-%20electronic - Import exportNumber of results
108 ProductsCountries
Company type
Category