Cable hook - Import export

HOOK FOR CABLES

HOOK FOR CABLES

- Low-maintenance system for travel up to 100 m - Other sizes and versions available, travel up to 200 m and more with E2 roller e-chains® - Protection against weather and dirt exposure - Cost-effective and fully enclosed complete solution - Standardized and modular design - Simple wall assembly or optional floor mounting - Cable lengths up to 50% shorter than festooning, low-profile installation and no cable junction - Cables are at all times guided with a defined bending radius, and tensile forces are absorbed by the e-chain® - Cables cannot hook, jam, or tear - No slip ring contacts (as is the case on motor drums) -Cables or hoses can easily be retrofitted at any time Reduce electricity costs - direct drive due to scraper, no additional drives needed (as is the case on motor drums) Scraper arm (e.g. as mechanical connection to the scraper carriage) optionally available - we document the situation on-site and will propose a customised solution

Hook-and-loop cable ties for quickly organising and bundling cables. With loop for additional tensile strength. • Hook-and-loop cable ties with fastening loop for tidy cable management • Quickly organise and bundle cables • High tensile strength thanks to fastening loop • Reuse again and again • Ensure added safety at the workplace

Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.

Balancers are holding tools in a waiting position. The needed tools in production are always ready for use. They increase safety and ergonomics at workplace. Features: Safe suspension with freely rotating and swivelling screw-type spring hook Housing of very impact-resistant and abrasion-resistant plastic Housing cover of painted sheet steel Cable drum of high-strength, abrasion-resistant plastic High-strength special suspension spring High-strength steel cable Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Simplified load setting

Spiral hoses available in 9 x 13 and 11 x 16 variants Max. operating pressure 10 bar Safe suspension with freely rotating and swivelling screw-type spring hook Housing of very impact-resistant and abrasion-resistant plastic Cable drum of abrasion-resistant plastic High-strength special suspension spring High-strength steel cable Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Infinitely variable load setting Available without (Type 7221) or with (Type 7222) ratchet lock Rigid, impact-resistant design Electrically insulated suspension via screw-type spring hook (freely rotating and swivelling design) Includes safety chain as fall protection Mechanism for locking the cable drum High-strength special suspension spring Spring fracture safeguard is standard Includes ferrule for securing the cable end GS-certificate

Facts: Freely rotating and swivelling safety hook for suspension, adjustable Housing and housing cover of high-strength pressure-cast aluminum Cable drum of high-strength pressure-cast aluminum Closed ball bearings on both sides High-strength, encapsulated special suspension spring High-strength steel cable • Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Infinitely variable load setting via endless screw Patented freewheel protects against overrotation when the spring is released Available with and without manual lock.

Ergonomic support for heavy-duty hand tools up to 300 kg Facts: Freely rotating and swivelling safety hook for suspension, adjustable Housing and housing cover of high-strength chill-cast aluminum Cable drum of high-strength chill-cast aluminum Closed ball bearings on both sides High-strength, encapsulated special suspension spring High-strength steel cable Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Patented freewheel protects against overrotation when the spring is released Infinitely variable load setting via endless screw

Facts: Cable travel: A longer cable is available upon request Safe suspension with freely rotating and swivelling screw-type spring hook Housing of very impact-resistant and abrasion-resistant plastic Cable drum of abrasion-resistant plastic High-strength special suspension spring High-strength steel cable Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Infinitely variable load setting Available without (Type 7221) or with (Type 7222) ratchet lock Safety: Closed unit Rigid, impact-resistant design Electrically insulated suspension via screw-type spring hook (freely rotating and swivelling design) Includes safety chain as fall protection Mechanism for locking the cable drum High-strength special suspension spring Spring fracture safeguard is standard GS certified

Ergonomic support for heavy duty hand tools. Facts: Freely rotating and swivelling safety hook for suspension, adjustable Housing and housing cover of high-strength chill-cast aluminum Cable drum of high-strength chill-cast aluminum Closed ball bearings on both sides High-strength, encapsulated special suspension spring High-strength steel cable Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Patented freewheel protects against overrotation when the spring is released Infinitely variable load setting via endless screw

Special tool balancer with double cable for extra safety. Facts: Dual-cable design Freely rotating and swivelling safety hook for suspension, adjustable Housing and housing cover of high-strength pressure-cast aluminum Cable drum of high-strength chill-cast aluminum Closed ball bearings on both sides High-strength, encapsulated special suspension spring High-strength steel cables Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Infinitely variable load setting via endless screw Patented freewheel protects against overrotation when the spring is released

The balancer is holding tools in a waiting position. The tool is ready to be used at anytime. Increase safety and ergonomics at workplace. Facts: Freely rotating and swivelling safety hook for suspension Housing of very impact-resistant and abrasion-resistant plastic Cable drum of high-strength, very abrasion-resistant plastic High-strength special suspension spring High-strength steel cable Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Infinitely variable load setting via endless screw Available without (Type 7230) or with (Type 7231) ratchet lock

Our ABS Lanyard - Y-connector model has been tested in accordance with EN 354:2010 and is equipped with a sharp edge-tested kernmantle cable and an integrated energy absorber (acc. to EN 355:2002). The device includes a carabiner hook and 2 pipe hooks. Length: 2 m. Total weight: 1.75 kg. EN 354:2010 & EN 355:2002 Sharp edge-tested kernmantle cable (Ø 12 mm) Integrated energy absorber Incl. carabiner hook and 2 pipe hooks Length: 2 m, total weight: 1.75 kg

Use one of these mobile kernmantle cable systems to temporarily install a horizontal lifeline system on a pitched or flat roof. This lanyard is equipped with freely-moving carabiner hooks and is available in 3 lengths: 15 m (1 hook), 23 m (2 hooks) and 30 m (3 hooks). EN 795:2012 & CEN/TS 16415:2017 EN 353-2:2002 & EN 358:2000 Sharp edge-tested kernmantle cable (Ø 12 mm) acc. RFU CNB/P/11.075 Incl. energy absorber and adjustable rope shortener Secures up to 4 individuals Incl. spliced carabiner hooks which move freely along the cable (15 m = 1 hook, 23 m = 2 hooks, 30 m = 3 hooks)

Details mono rail double rail Standard configuration: load-bearing structure for aerial conveyor, carriages and panels for attaching hooks rotating either automatically or manually electric reduction gear for an optimum control of the hook advance speed lv control panel wired with flame-retardant cable automatic hooks storage device

TKD | 02 Electronic (LF), telecommunication & intrinsically safe systems cables Electronic cables, versatile for low-frequency data transmission systems in electronics and electrical engineering. Telephone cables for indoor and outdoor use in communications technology as well as for fire alarm systems. - PVC- & Halogen-free electronic cables - Electronic & control cables for intrinsically safe circuits - Approved electronic & data cables - Low-capacity data cables - Hook up & installation cables - Halogen-free installation cables - Instrumentation cables - Telecommunication cables Excerpt of versions: > double shielded, shielded, unshielded > stranded in layers, pairs, triples, quads > UV-resistant, Oil-resistant > UL/CSA recognized Excerpt of products: ELITRONIC® - PAARTRONIC® (PVC & FRNC) - DATATRONIC®-CY (UL/CSA) - DATEX-CY - DATEX-PIMF-CY - INDUCOM® RE-2X(St)Yv-fl - INDUCOM® RE-2X(St)Yv-fl PIMF