inductive sensors - IC120126
sensor inductive, all-steel, M12x1 60long, Flush, Sn: 6, 10-30V DC, 85°C
Description
Inductive proximity switches are contact-free sensors. They detect all conductive metals, regardless of whether they move or not. The achievable sensing range of the devices depends on the object material and its dimensions. The vibration-resistant sensors can be approached laterally or frontally. Inductive proximity switches are used for presence detection (e.g. goods carriers), positioning (e.g. dampers), counting (e.g. nuts /bolts), speed detection (e.g. for cog wheels), on conveyor systems (e.g. hose feedings) or distance measurements (e.g. press-in checking) of metallic objects.
- Inductive sensors
- full steel
- shockproof
- factor 1
Product characteristics
- Voltage type
- DC
- Design
- Cylinder, screw-thread
- Housing material
- Stainless steel 1.4305
- Thread size, metric
- 12
- Type of electrical connection
- Connector M12
- Type of switching output
- PNP
- Type of switching function
- Normally open contact
- Mechanical mounting condition
- Flush
- Active area material of sensor
- Stainless steel 1.4305
- Degree of protection (IP)
- IP67
- Correction factor (St37)
- 1
- Correct. fact. (stainl. st. V2A: 1mm)
- 0.4
- Correct. fact. (stainl. st. V2A: 2mm)
- 0.8
- Correction factor (aluminum)
- 1
- Correction factor (brass)
- 1.3
- Correction factor (copper)
- 0.85
- Cable infeed
- Axial
- Alignment of cable entry
- Axial
- Switching frequency
- 600Hz
- Max. line length
- 300m
Documents
Similar products
SHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
these screws are used in different machine.
NORELEM FRANCE
France
The tension meter is used to perform a pretension test on commercially available belt systems quickly and easily by means of frequency measurement. Fully electronic and equipped with stateoftheart microprocessor technology, the meter enables precise adjustment of all V, toothed and flat belts that have to be tensioned in the range from 10 to 600 Hz. The measurement must never be performed while the drive is running The meter is not permitted or certified for use in potentially explosive areas.
EDDYLAB GMBH
Germany
Based on the SL series, the SLT probes are also characterized by an ultra robust construction and a fully stainless steel housing which makes them suitable for harsh environments. The combination of a hardchrome plated shaft with 6 mm in diameter and precision bearings guarantees highest resistance to lateral forces on the push rod. There are three different functional variants available to meet the demands of most measuring tasks: ■ Spring loaded mechanism: The push rod is fully extended by an internal spring. ■ Pneumatic version 1: The push rod extends by applying pressurized air. An internal spring retracts the push rod after releasing the pressure. ■ Pneumatic version 2: The push rod retracts by applying pressurized air. An internal spring extends the push rod after releasing the pressure. Each sensor requires a carrier frequency measuring amplifier to operate, which evaluates and transforms the sensors signal to a standardised analog output signal of 0...10 V or 4...
THERMA THERMOFÜHLER GMBH
Germany
The versatile Therma resistance thermometers convince with their precise measurement of fluids in the vehicle. They are optionally available with M6, M5 or M4 male threads. The technical equipment of the resistance sensor offers additional options. It is available as Pt100 or Pt1000, in Class A or optionally also as NTC 10 KΩ. This versatility ensures compatibility with motor sports products and controllers from Bosch. Screw-in resistance thermometer as Pt100 or Pt1000 or NTC 10KOhm
Request for quotes
Create one request and get multiple quotes form verified suppliers.
- Only relevant suppliers
- Data privacy compliant
- 100% free