Fillet Radius - TECHNICAL PARAMETERS
Fillet Radius - TECHNICAL PARAMETERS

Fillet Radius - TECHNICAL PARAMETERS

To ascertain proper mounting of the bearing on the shaft and housing while ensuring maximum surface contact area, the proper fillet radius must be used. Too small and the bearing will not sit flush against the shoulder, too large and we forego precious surface area to reinforce the support. Done right, the optimal surface area is used while avoiding any chance of interference between the fillet and the shaft or housing.
Similar products
1/15
Friction Torque - TECHNICAL PARAMETERS
Friction Torque - TECHNICAL PARAMETERS
The resistance generated by the seal (if present), depending on the surface finish of the outside diameter of the inner ring, as well as of the rotati...
CH-1630 Bulle
Special Profiles - TECHNICAL PARAMETERS
Special Profiles - TECHNICAL PARAMETERS
Each bearing is designed around the application it is used in and sometimes that include a profile on the inner or outer ring. We have an array of pro...
CH-1630 Bulle
Nomenclature - TECHNICAL PARAMETERS
Nomenclature - TECHNICAL PARAMETERS
At WIB, we produce all subcomponents, including inner and outer rings, brass and steel cages, as well as the shields to the highest quality standards.
CH-1630 Bulle
Tolerances - TECHNICAL PARAMETERS
Tolerances - TECHNICAL PARAMETERS
Certain applications call for special tolerancing to ensure optimal performance, which WIB is accustomed to accommodating. Dimensions that fall outsid...
CH-1630 Bulle
Heat Treatment - TECHNICAL PARAMETERS
Heat Treatment - TECHNICAL PARAMETERS
The 100 Cr6 steel rings manufactured by WIB are stabilized after hardening by annealing. As a result of this treatment, they can be used at temperatur...
CH-1630 Bulle
Bearing Noise - TECHNICAL PARAMETERS
Bearing Noise - TECHNICAL PARAMETERS
The noise level is an important quality criteria of a ball bearing. It mainly depends on the following factors: precision of the geometric forms sur...
CH-1630 Bulle
Internal Clearance - TECHNICAL PARAMETERS
Internal Clearance - TECHNICAL PARAMETERS
The radial clearance is not considered a quality criterion. An improper radial or axial clearance may have detrimental implications during operation w...
CH-1630 Bulle
Lubrication - TECHNICAL PARAMETERS
Lubrication - TECHNICAL PARAMETERS
The primary function of a lubricant is to lubricate the rolling and sliding contacts of a bearing to enhance its performance through the prevention of...
CH-1630 Bulle
Shields and Seals - TECHNICAL PARAMETERS
Shields and Seals - TECHNICAL PARAMETERS
Closures, more commonly known as shields and seals are used to protect the internal parts of the bearing against dust, liquid, and gaseous particle co...
CH-1630 Bulle
Contact Surfaces Treatment - TECHNICAL PARAMETERS
Contact Surfaces Treatment - TECHNICAL PARAMETERS
By applying surface treatments on outer ring contact surfaces, it is possible to improve certain mechanical characteristics such as the hardness. By d...
CH-1630 Bulle
Cages - TECHNICAL PARAMETERS
Cages - TECHNICAL PARAMETERS
Cages are used to position and keep the balls distanced from each other at the pitch circle diameter. We offer a variety of different cage architectur...
CH-1630 Bulle
Synthetic Coating - TECHNICAL PARAMETERS
Synthetic Coating - TECHNICAL PARAMETERS
It is even possible to apply a coating on the outer ring, before assembling the bearing, thus guaranteeing the best possible geometrical forms. The ma...
CH-1630 Bulle
Snap Rings - TECHNICAL PARAMETERS
Snap Rings - TECHNICAL PARAMETERS
For certain applications, it may be appropriate to use ball bearings fitted with a snap ring fixed on the outer ring. The dimensions of the N groove ...
CH-1630 Bulle
Packaging & Labeling - TECHNICAL PARAMETERS
Packaging & Labeling - TECHNICAL PARAMETERS
Packaging is a very important parameter for the retention of the bearing quality during transport and storage. It is designed to protect the bearings ...
CH-1630 Bulle
Linear Guide System Bearings - SPECIAL SEGMENTS
Linear Guide System Bearings - SPECIAL SEGMENTS
As the leading manufacturer of linear guide system bearings, WIB works collaboratively with customers on the development of common and tailor designs,...
CH-1630 Bulle

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play