Pneumatic clamp - Pneumatic clamps
Pneumatic clamp - Pneumatic clamps

Pneumatic clamp - Pneumatic clamps

Pneumatic clamps have the following advantages compared to hand clamps: The operator is relieved of frequent clamping. Several clamps can be activated at the same time and can be closed in a specific sequence. Single or multiple clamps can be activated from varying positions by machine control or hand control. Because of the toggle system: the clamp remains closed if the air supply fails. the air consumption is low due to the large end ratio. pivoting the clamping arm achieves a large opening travel. optimum force and movement ratios are achieved. VL = air consumption per complete cycle in dm³ at 6 bar. Selection criteria: To select the correct size of pneumatic clamps, the possible clamping force at 6 bar (any compressed media are permissible, maximum pressure 10 bar) is specified besides the retaining force. F3 is the possible clamping force that the clamp exerts on the end of the clamping arm, F4 the force it exerts on the fulcrum side. Reference:05331
Similar products
1/15
Plain bearing for rotary stages - Plastic slide guides
Plain bearing for rotary stages - Plastic slide guides
Aluminium outer ring and inner ring. Iglidur® J plastic slide elements. Stainless steel A2 screws. Version Anodised outer ring and inner ring. Note Al...
FR-10280 Fontaines Les Gres
Rest pads - Rest pads and positioning feet
Rest pads - Rest pads and positioning feet
Rest pads are for supporting machined and non-machined parts. They can also be used as stops and thrust pads in fixtures and toolmaking. Studs or grub...
FR-10280 Fontaines Les Gres
Hook clamps with mounting bracket - Clamping and alignment elements
Hook clamps with mounting bracket - Clamping and alignment elements
Hook clamps and clamping screw carbon steel, tempered. Reference:04374 Version:Black oxidised...
FR-10280 Fontaines Les Gres
Switching Power Supplies for Symmetrical Rail Mounting - Transformers, Power Supplies
Switching Power Supplies for Symmetrical Rail Mounting - Transformers, Power Supplies
Single-phase primary switch-mode power supply in a metal housing. Closed version with screw terminals protected against accidental contact. Overload p...
FR-10280 Fontaines Les Gres
Pneumatic round cylinders din iso 6432 double-acting with - Pneumatic cylinder
Pneumatic round cylinders din iso 6432 double-acting with - Pneumatic cylinder
Doubleacting pneumatic cylinder acc. to DIN ISO 6432. Piston rod with external thread, position detection for proximity switch and flexible damping on...
FR-10280 Fontaines Les Gres
Swing clamp pneumatic - Swing clamps Clamping hooks
Swing clamp pneumatic - Swing clamps Clamping hooks
The pneumatic swing clamp is suitable for clamping workpieces from above. The swivel and clamping function occurs pneumatically. The swivel function e...
FR-10280 Fontaines Les Gres
Pneumatic Cylinder Standardized DIN ISO 15552 - Pneumatic Cylinder
Pneumatic Cylinder Standardized DIN ISO 15552 - Pneumatic Cylinder
Double-acting pneumatic cylinder with an optimized design for construction according to DIN ISO 15552. Piston rod with threading, position detector, a...
FR-10280 Fontaines Les Gres
Spring Hinges Aluminum Profile 0.7 Nm, Long Version - Hinges
Spring Hinges Aluminum Profile 0.7 Nm, Long Version - Hinges
Aluminium 6060 T5. Cover cap PA 6.6. Black anodized. Colorless anodized. The hinges are equipped with a stainless steel tension spring. This allows fo...
FR-10280 Fontaines Les Gres
Ceramic dowel pins similar to din 6325 - Parallel blocks, T-slot nuts, cylindrical pins
Ceramic dowel pins similar to din 6325 - Parallel blocks, T-slot nuts, cylindrical pins
The dimensions of the dowel pin comply with DIN 6325. Advantages: Ideal for fixture construction Dimensionally stable even at high temperatures Electr...
FR-10280 Fontaines Les Gres
Drill bushes cylindrical din 179 - Drill bushes
Drill bushes cylindrical din 179 - Drill bushes
From diameter D1 over 15 mm size increases are 0.5 mm. 1) Chamfer for insert Reference:08900 Material:Special low carbon steel Version:Hardened to 74...
FR-10280 Fontaines Les Gres
Parallel key ceramic similar to din 6885 a - Parallel blocks, T-slot nuts, cylindrical pins
Parallel key ceramic similar to din 6885 a - Parallel blocks, T-slot nuts, cylindrical pins
Parallel keys are used for the implementation of shaft-hub connections. These are positive connections which are used to transmit torque. Reference:0...
FR-10280 Fontaines Les Gres
Uni lock mounting clamps - UNI lock
Uni lock mounting clamps - UNI lock
The UNI lock mounting clamps can be installed in any position on machine tables, fixtures or workholding equipment (tooling plates, cubes, tombstones ...
FR-10280 Fontaines Les Gres
Pneumatic compact cylinders din iso 21287 double-acting with - Pneumatic cylinder
Pneumatic compact cylinders din iso 21287 double-acting with - Pneumatic cylinder
Doubleacting pneumatic cylinder acc. to DIN ISO 21287. Piston rod with internal or external thread, position detection for proximity switch and flexib...
FR-10280 Fontaines Les Gres
Rigid Slot Coupling - Couplings
Rigid Slot Coupling - Couplings
Steel 1.0718. Stainless Steel 1.4305. Rigid couplings transmit torque without twisting and without play. They are used in the absence of alignment def...
FR-10280 Fontaines Les Gres
Trapezoidal thread nuts round double-start rh thread - Trapezoidal threaded spindles and trapezoidal threaded nuts
Trapezoidal thread nuts round double-start rh thread - Trapezoidal threaded spindles and trapezoidal threaded nuts
Steel C35Pb. Gunmetal Rg7. Plastic PA6.6 with MoS2). ISO trapezoidal thread based on DIN 103. Steel nuts for adjustments during manual operation and a...
FR-10280 Fontaines Les Gres

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play