UNILOCK ESM 138-C Clamping Module
UNILOCK ESM 138-C Clamping ModuleUNILOCK ESM 138-C Clamping ModuleUNILOCK ESM 138-C Clamping ModuleUNILOCK ESM 138-C Clamping Module

UNILOCK ESM 138-C Clamping Module

UNILOCK clamping modules can be installed on machine tables or devices (plates, cubes, towers, etc.), with or without overhang, and in any position. The pneumatic control of the clamping modules can be individual or collective. This allows for a customized zero-point clamping system. Their modular design optimally adapts the number and spacing of the clamping modules to the clamping operation to be performed. Setup times are significantly reduced, which extends the lifespan of the machines. High clamping forces are generated by the integrated spring unit (the unit is clamped without pressure). The release is done via a pneumatic system. Even in the event of a pressure drop or fluctuations in the compressed air supply, the pulling force is fully maintained. Clamping force (M10): 35,000 N Clamping force (M12): 50,000 N Clamping force (M16): 75,000 N Pulling force with turbo: 25 kN System pressure: 6 bars, lubricated air Repeatability accuracy: ≤ 0.005 mm Temperature range: from 5° to 60° C
Similar products
1/15
UNI lock Clamping Module - UNI lock
UNI lock Clamping Module - UNI lock
Cemented, hardened, and ground functional surfaces. Note: The UNI lock clamping modules can be integrated into machine tool tables or fixtures (tables...
FR-10280 Fontaines Les Gres
Eccentric clamp modules - Special elements
Eccentric clamp modules - Special elements
Body steel. Cam levers cast aluminium. Version Body black oxidised. Tnut electro zincplated. Cam levers black powder coated. Note The clamp module is ...
FR-10280 Fontaines Les Gres
Square Clamping Vise - Clamping and Centering Element
Square Clamping Vise - Clamping and Centering Element
The lateral clamping screw allows for the operation of the clamping vise and secures the workpiece along its contour. The compact and simple design en...
FR-10280 Fontaines Les Gres
Sliding Clamp - Stacked Clamp
Sliding Clamp - Stacked Clamp
Recommended bracket support: 02130 and 02150. Reference: 04010 Material: Steel treatment 1.1191 Finish: Bruni...
FR-10280 Fontaines Les Gres
Floating clamp with separate workpiece clamp and interlock - Clamping jaws Edge clamps Tension nuts and screws
Floating clamp with separate workpiece clamp and interlock - Clamping jaws Edge clamps Tension nuts and screws
Fasten the floating clamp to the fixture with the M12 screw. Adjust the height stop and the swivel range using the blue sleeve and lock with the 3x2.5...
FR-10280 Fontaines Les Gres
Machinable collets square - Centring clamps
Machinable collets square - Centring clamps
The lateral clamping screw tightens the jaws and clamps the workpiece on the circumference. The simple and compact design allows 2 workpieces to be cl...
FR-10280 Fontaines Les Gres
Clamp stops adjustable for slot profiles - Stops
Clamp stops adjustable for slot profiles - Stops
Body aluminium. Other metal components steel. Plastic components PA6. Version: Body natural tone anodised. Other metal components trivalent blue passi...
FR-10280 Fontaines Les Gres
Toe clamps for t-slots - Clamping cams
Toe clamps for t-slots - Clamping cams
These toe clamps can be used on machine tables or adapter plates. The positive down force holds the workpiece down on the supporting surface. The squa...
FR-10280 Fontaines Les Gres
Mandrel collet for small bores - Centring clamps
Mandrel collet for small bores - Centring clamps
The mandrel collet is used in small through bores to position and clamp workpieces. Clamping is carried out manually from above using a hex key. The m...
FR-10280 Fontaines Les Gres
Clamp straps din 6314 straight steel or aluminium - Stepped clamps
Clamp straps din 6314 straight steel or aluminium - Stepped clamps
Steel painted. Aluminium bright. Note: When using spherical washers use the wide series 07420 Form G. Reference:04080 Material:Carbon steel or EN AW-...
FR-10280 Fontaines Les Gres
Multiple Clamping Systems - with Double-Sided Clamping Jaws
Multiple Clamping Systems - with Double-Sided Clamping Jaws
Multiple clamping systems of different lengths can be mounted one behind the other or side by side. The precision teeth allow for very accurate positi...
FR-10280 Fontaines Les Gres
Pneumatic linear module with two cylindrical guides - Pneumatic linear modules and gantries
Pneumatic linear module with two cylindrical guides - Pneumatic linear modules and gantries
Base body and connection plates made of EN AW5754. Guide shafts made of steel. Base body with corrosion protection. Anodized connection plate. Hardene...
FR-10280 Fontaines Les Gres
Mandrel collets steel with cam lever - Centring clamps
Mandrel collets steel with cam lever - Centring clamps
It is recommended that the cam lever is in a vertical position when the collet is positioned in the bore. The function of the clamping system was test...
FR-10280 Fontaines Les Gres
Eccentric Clamping Crampon - Clamping Eccentrics
Eccentric Clamping Crampon - Clamping Eccentrics
The eccentric clamping jaw can be used directly on the machine table or on adapter plates. The clamping effect allows for the workpiece to be secured ...
FR-10280 Fontaines Les Gres
Clamp straps double-sided 90° swivelling - Stepped clamps
Clamp straps double-sided 90° swivelling - Stepped clamps
The double-sided clamp straps are ideal for series clamping. For special applications, the clamping flange can be replaced with another clamping flang...
FR-10280 Fontaines Les Gres

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play