Keyless locking couplings with central nut - Shaft-hub clamping sets
Keyless locking couplings with central nut - Shaft-hub clamping sets

Keyless locking couplings with central nut - Shaft-hub clamping sets

Keyless locking coupling with low mass and moment of inertia. Easy to connect and release – no jamming on the shaft. Perfect for zero backlash connections. Excellent concentricity and running. Suitable for keyed and keyless shafts. for shaft diameters from 5 to 35 mm for high torques minimum axial offset when mounting selfcentring Assembly Shaft and hub must be free of oil, grease and dirt. Do not lubricate keyless locking coupling. Insert keyless locking coupling in the hub seat and slide onto shaft. Tighten nut by hand and use a torque wrench to tighten to the defined tightening torque. Tolerances Shaft diameter and hub hole Form A ±0.04 mm. Form B ±0.08 mm. Surface quality Rz ≤ 16 µm. Reference:23368 Material:Steel Version:Bright
Similar products
1/15
Telescopic slides steel for side mounting full extension - Telescopic slides
Telescopic slides steel for side mounting full extension - Telescopic slides
Slides steel. Ball cages steel. Balls, steel. Version Slides electro zincplated. Ball cages, electro zincplated. Balls hardened. Note for ordering Sol...
FR-10280 Fontaines Les Gres
Locating pins removable form a and c - Locating pins, positioning systems
Locating pins removable form a and c - Locating pins, positioning systems
Hardened and ground (HRC 56 +2). Note: The locating pins can be easily removed with an extractor. Reference:03105 Material:Tool steel...
FR-10280 Fontaines Les Gres
Carriages - Profile guide rails
Carriages - Profile guide rails
Body carbon steel. Balls roller bearing steel. Diverters plastic. Standard guide carriage with recirculating ball guidance precision N not preloaded (...
FR-10280 Fontaines Les Gres
Palm grips stainless steel similar to din 6335 - Grips, handles and knobs
Palm grips stainless steel similar to din 6335 - Grips, handles and knobs
Stainless steel 1.4308. Grub screw stainless steel 1.4305. Pin stainless steel 1.4310. Version: Ground and polished or blasted. Grub screw and pin bri...
FR-10280 Fontaines Les Gres
Self-aligning pads with o-ring and exchangeable inserts - Self-aligning pads
Self-aligning pads with o-ring and exchangeable inserts - Self-aligning pads
Body tempered, black oxidised. Ball hardened, bright. Inserts: Form C, F hardened, black oxidised. Form M with carbide serrations, black oxidised. For...
FR-10280 Fontaines Les Gres
Magnetic tape scale with incremental coding 5 mm pole length - Scales, position indicators
Magnetic tape scale with incremental coding 5 mm pole length - Scales, position indicators
Magnetic tape, magnetised plastic sheet. Carrier band steel. Cover band stainless steel. Version Scale with incremented coding. Pole length 5 mm. Note...
FR-10280 Fontaines Les Gres
Chain tensioner sets - Chains and sprockets
Chain tensioner sets - Chains and sprockets
Tensioner Vesconite® plastic. Screw and nut steel. Version Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. N...
FR-10280 Fontaines Les Gres
Bevel gears in steel ratio 1:1 toothing milled straight - Gears / Gear Racks / Bevel Gears
Bevel gears in steel ratio 1:1 toothing milled straight - Gears / Gear Racks / Bevel Gears
Milled toothing, straight teeth. Engagement angle 20°, bright. Axis angle = 90°. Note for ordering Bevel gears are supplied singly. To obtain a pair o...
FR-10280 Fontaines Les Gres
Stepper motor with integrated positioning control - Stepper motors
Stepper motor with integrated positioning control - Stepper motors
2-phase high-torque stepper motor in NEMA 17, NEMA 23 and NEMA 34 sizes with flat-milled shaft (D-shaft). 1.8ׄ° increment angle (full increment) with ...
FR-10280 Fontaines Les Gres
Workpiece stabiliser set with case - Structural and supporting elements
Workpiece stabiliser set with case - Structural and supporting elements
Objects sized between 355 and 980 mm can be set up using this stabiliser set. It is basic equipment for supporting workpieces. The individual parts ar...
FR-10280 Fontaines Les Gres
Motor adapter sets - Linear and gantry modules, electric
Motor adapter sets - Linear and gantry modules, electric
Elastomer spider polyurethane Shore 98A. Coupling housing and clamping hub, aluminium. Expanding mandrel steel. Screws steel. Centring rings 1.4301 st...
FR-10280 Fontaines Les Gres
Hexagon head screws stainless steel in hygienic design - Connecting elements
Hexagon head screws stainless steel in hygienic design - Connecting elements
The surface of the hexagon head bolt is polished and, with regard to design optimised for the use in hygienic environments. The bolt head is convex on...
FR-10280 Fontaines Les Gres
Rest pads - Rest pads and positioning feet
Rest pads - Rest pads and positioning feet
Case-hardened, black oxidised and ground. Reference:02130 Material:Steel 1.0301...
FR-10280 Fontaines Les Gres
Clamp straps double-sided 90° swivelling - Stepped clamps
Clamp straps double-sided 90° swivelling - Stepped clamps
The double-sided clamp straps are ideal for series clamping. For special applications, the clamping flange can be replaced with another clamping flang...
FR-10280 Fontaines Les Gres
Magnetic sensors passive sensors miniature design - Scales, position indicators
Magnetic sensors passive sensors miniature design - Scales, position indicators
Housing aluminium. Cable sheath PVC. Version Compact sensor and plug design. Flat connector, 8pole, 1x pin. Connection cable, 6wire, ø 3.55–0.3 mm. Ca...
FR-10280 Fontaines Les Gres

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play