Carbon Braided Straps
Carbon Braided Straps

Carbon Braided Straps

Carbon braided bands / strands as an alternative to conventional carbon fabric bands. Due to the braiding technique, the application width is variable through stretching and compressing. Carbon Braided Bands - Strands Thread Count: 65 Fiber: 1K (67tex), 3K (200tex) Carbon braided bands are an excellent alternative to conventional carbon fabric bands. Because of the special braiding technique, the application width is variable. By stretching or compressing, the width can be adjusted. Ideally, the fiber angle should be between 30° and 60°. This allows for optimal torsional and shear strengths without the need for complex cutting. For more information, visit www.hp-textiles.de
Similar products
1/15
Fiber Optic Braided Straps - Strands
Fiber Optic Braided Straps - Strands
Fiberglass braided bands/strands with a width of 36mm and 65mm. They are an excellent alternative to conventional fiberglass fabric bands. Fiberglass...
DE-48480 Schapen
Unidirectional Carbon Fiber 0°
Unidirectional Carbon Fiber 0°
Unidirectional carbon fabrics with 0° fiber orientation in various weight classes from 30g/m² to 500g/m² for optimal component properties. Unidirecti...
DE-48480 Schapen
3D|CORE™ 3mm XPS Foam HEXAGON 45Kg/m³
3D|CORE™ 3mm XPS Foam HEXAGON 45Kg/m³
3D|CORE™ Hexagon is a structure-reinforcing foam core (SRF) made of hexagonal foam honeycombs. The honeycomb construction allows for tremendous flexib...
DE-48480 Schapen
Vacuum Seal Tape / Tacky Tape
Vacuum Seal Tape / Tacky Tape
Double-sided adhesive vacuum sealing tape made of butyl rubber for sealing the film and positioning the spiral hoses. Also available in a heat-resista...
DE-48480 Schapen
Glass Staple Fiber Fabric (160 - 400 g/m²)
Glass Staple Fiber Fabric (160 - 400 g/m²)
The well-drapable glass staple fiber fabrics with 160g/m² or 400g/m² are particularly suitable as coating carriers for seals and compensators. Glass ...
DE-48480 Schapen
Double Syringe, Adhesive Resin / Epoxy Resin HP-E5K
Double Syringe, Adhesive Resin / Epoxy Resin HP-E5K
The epoxy resin HP-E5K in a 29g dual syringe is a user-friendly 2-component adhesive with a processing time of approximately 5 minutes.
DE-48480 Schapen
Aramid Fabric Twill (110 - 470 g/m²)
Aramid Fabric Twill (110 - 470 g/m²)
Aramid fabrics with twill weave in the weight range of 110g/m² - 470g/m². Aramid fibers are characterized by high toughness as well as particularly go...
DE-48480 Schapen
Glass Fabric Silane Twill (86 - 390 g/m²)
Glass Fabric Silane Twill (86 - 390 g/m²)
Glass filament fabric with twill weave and silane finish. This glass fabric is available in weight classes from 86g/m² to 390g/m².
DE-48480 Schapen
Release Coating / HP-PVA
Release Coating / HP-PVA
High-quality, silicone-free release agent based on polyvinyl alcohol with high release properties. Operating temperature up to 100°C. Release Coating...
DE-48480 Schapen
Multiaxial Glass Fabric Bidirectional 0°/90°
Multiaxial Glass Fabric Bidirectional 0°/90°
Bidirectional glass fabrics with 0°/90° fiber orientation in weight classes from 421g/m² to 840g/m² ensure a load-oriented fiber alignment. Multiaxia...
DE-48480 Schapen
MTI® Line for Vacuum Infusion / HP-MTI-08
MTI® Line for Vacuum Infusion / HP-MTI-08
Membrane-coated MTI® line for vacuum infusion to optimize component quality and minimize air inclusions. This membrane is permeable to air and gases.
DE-48480 Schapen
Multiaxial Glass Fabric Quadraxial 0°/-45°/90°/+45°
Multiaxial Glass Fabric Quadraxial 0°/-45°/90°/+45°
Quadraxial glass fabrics with fiber orientation at 0°/-45°/90°/+45°. These glass fiber fabrics are available in a weight range of 630g/m² to 1200g/m².
DE-48480 Schapen
Epoxy Resin Coating Systems (Gelcoats/Topcoats)
Epoxy Resin Coating Systems (Gelcoats/Topcoats)
The topcoat resin systems HP-E25D, HP-E25DM, and HP-E40D are epoxy resins with enhanced UV resistance for sealants and surface coatings.
DE-48480 Schapen
1000g/m² Glass Fiber Fabric Finish for Molding / HP-HD1000EF
1000g/m² Glass Fiber Fabric Finish for Molding / HP-HD1000EF
Heavy mold construction fabric, very tightly woven. Excellent drapability with very good wetting properties. Glass filament fabric finish Weight: 100...
DE-48480 Schapen
Cotton Flakes / HP-BF1
Cotton Flakes / HP-BF1
Cotton flakes HP-BF1 for mixing into epoxy and polyester resins to reinforce heavily stressed areas in the molded part and to create bonds.
DE-48480 Schapen

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play