Digital indicator - 9180 - Digital Display for Strain Gauge Units,Process indicator,torque, force, pressure

Model 9180 supports force, pressure and torque sensors operating on the strain gauge principle, as well as the connection of position and angle sensors in potentiometer or DC/DC configuration. It also allows the measurement of process signals ± 1 V/ 5 V/ 10 V or 0 ...1 mA, 0(4) ... 20 mA. The current measured value is indicated on the 14 mm high LED main display, while a second display located directly below provides a reading of the peak value. The display is particularly suitable for highly accurate measurements due to the high accuracy of 0.1%. It is also possible to monitor up to 4 limit values and provide the results via relay or transistor outputs. Thus the process value display can be used for classification, process and control tasks. The current measured value is frozen on the display by activating an external HOLD signal. The TARE function is useful for balancing out previous loads for example. Measurement accuracy:0.1 % F.S. Sample rate:16/s Type of sensor:Strain gauge / Potentiometer / Standard signals / DC/DC / Transmitter Interfaces:RS232, RS485, BCD Indicator:± 999 999 Sensor excitation Strain gauge::10 V/120 mA 5 V/120 mA Sensor excitation Potentiometer::10 V/120 mA 5 V/120 mA Sensor excitation: Standard signals:DC/DC sensors and transm. ±1 V ± 10 V Protection class:IP65 Supply voltage:115/230 VAC, 50/60 Hz - 24/48 VAC, 50/60 Hz Measurement channels:16