Elastotex 120 Cloth
Waterproof butt strap, consisting of a expandable elastomeric rubber, entirely coated on both sides with absorbent fabric, with an overall width of 12 cm. The product is distinctive for its simple and easy application, the ascertained watertightness to water and the high deformation capacity.
Unlike Elastotex 120, where the elastic part is represented exclusively by the central part of the product (8 cm wide), the entire width of Elastotex 120 Cloth consists of an elastomeric material (12 cm), allowing a greater maximum expansion and adaptation to structural movements. In addition, the entire width of the band is lined with absorbent fabric, so it can be impregnated on a more extended portion of its surface, ensuring superior adhesion to the support.
Connection of waterproofing surfaces adjacent to joints in structures or artefacts subject to thermal or dynamic movements, particularly suitable in waterproofing coating interventions that interweave the use of Osmocem Flex or Osmocem D.
The application surfaces should be clean, free of incrustations, dust and non-adhering parts, carefully roughened.
Previously apply Osmocem Flex or Osmocem D on the laying surfaces (with a layer of average thickness not less than 2 mm), for a width greater than that of the Elastotex 120 Cloth butt. Lay the strap and press it appropriately in the prepared osmotic mortar, ensuring the incorporation of the latter (for the whole width of the strap) in the fabric that covers it. Complete the coating with Osmocem Flex or Osmocem D.
1.1 m/m: 1 metre of Elastotex 120 Cloth for each linear metre, being careful to overlap the rolls of approximately 5-10 cm in correspondence with the edges of the band to guarantee the permanent water tightness of the system.
Packaging: Roll of 30 meters
UM: €/m
Readymesh PM-060
Readymesh PM is an auxiliary, multi-filament polypropylene micro-fibre suitable for addition to cement conglomerates with a lime or ...
Readymesh PW-120
Readymesh PW-120 is an auxiliary fibrillated polypropylene micro-fibre, with a length of 12 mm, suitable for adding concrete in gene...
Readymesh PF-180
Readymesh PF is a stranded structural polyolefin macro-fibre, high-performance, specific for the realisation of continuous surfaces ...
Armaglass Structura 99
Monolithic GFRP mesh made with glass yarn bars and pultruded epoxy resin. The bars are intertwined with each other through a s...
Grout iTop
Grout iTOP is a high-performance, structural, expansive cement mortar to be cast for centimetric thickness in precision anchorages or for ...
Syntech Epox Timber
Syntech Epox Timber is a liquid, transparent, two-component epoxy resin for incorporating thick objects, mass filled casting and ...
Prerit Compound
Additive power mix for enhanced performance of the functional characteristics of the concrete used to create architectural floors of ...
Osmocem 447
Anti-leaching mortar with plastic consistency, fast-hardening, based on silica fume, high resistance hydraulic binders, polymeric binders...
Grout 6
Grout 6 is a high-performance, self-levelling pourable mortar that is fibre-reinforced with Readymesh PM-060 microfibres, with high durabilit...
Grout Micro-J
An anti-shrinkage, pourable, self-levelling, super-adhesive micro-mortar, based on high-strength cements, super-pozzolanic fillers, pol...
Armaglass 160
Anti-cracking reinforcement mesh, based on alkaline-resistant fibreglass fibres for better distribution of tension and to prevent crack...
Super-fluid, injectable, cementitious grout with very high flowability and stability, moderately expansive in the plastic phase, for fixings, anchors,...
Floorband 200
Floorband 200 – comprised of closed-cell polyethylene and being lightweight, waterproof, imputrescible, mould-proof and with a high res...
Microsil 90 Bianco
Selected white silica fume for the production of high density and high performance conglomerates (waterproofness, chemical stabili...
Readymesh PM-060
Readymesh PM is an auxiliary, multi-filament polypropylene micro-fibre suitable for addition to cement conglomerates with a lime or ...
Readymesh PW-120
Readymesh PW-120 is an auxiliary fibrillated polypropylene micro-fibre, with a length of 12 mm, suitable for adding concrete in gene...
Readymesh PF-180
Readymesh PF is a stranded structural polyolefin macro-fibre, high-performance, specific for the realisation of continuous surfaces ...
Armaglass Structura 99
Monolithic GFRP mesh made with glass yarn bars and pultruded epoxy resin. The bars are intertwined with each other through a s...
Grout iTop
Grout iTOP is a high-performance, structural, expansive cement mortar to be cast for centimetric thickness in precision anchorages or for ...
Syntech Epox Timber
Syntech Epox Timber is a liquid, transparent, two-component epoxy resin for incorporating thick objects, mass filled casting and ...
Prerit Compound
Additive power mix for enhanced performance of the functional characteristics of the concrete used to create architectural floors of ...
Osmocem 447
Anti-leaching mortar with plastic consistency, fast-hardening, based on silica fume, high resistance hydraulic binders, polymeric binders...
Grout 6
Grout 6 is a high-performance, self-levelling pourable mortar that is fibre-reinforced with Readymesh PM-060 microfibres, with high durabilit...
Grout Micro-J
An anti-shrinkage, pourable, self-levelling, super-adhesive micro-mortar, based on high-strength cements, super-pozzolanic fillers, pol...
Armaglass 160
Anti-cracking reinforcement mesh, based on alkaline-resistant fibreglass fibres for better distribution of tension and to prevent crack...
Super-fluid, injectable, cementitious grout with very high flowability and stability, moderately expansive in the plastic phase, for fixings, anchors,...
Floorband 200
Floorband 200 – comprised of closed-cell polyethylene and being lightweight, waterproof, imputrescible, mould-proof and with a high res...
Microsil 90 Bianco
Selected white silica fume for the production of high density and high performance conglomerates (waterproofness, chemical stabili...