Distak-M : Physico-chemical release agent for metal formworks

Distal-M Release agent based on selected organic compounds, promoting removal and anti-corrosive agents, ready-to-use, specific for metal moulds. Distak-M should be used undiluted, sprayed directly on the surfaces to be treated. Distak-M performs a physico-chemical action: the product, properly applied, forms an extremely thin separating film between the formwork and the fresh concrete, allowing easy detachment and the resulting surfaces are free from stains and soiling. Distak-M is suitable for "stripping" metal moulds, both in traditional buildings and in prefabrication with normal and/or steam curing. The chemical activity, connected with the reaction, at superficial level with the alkalis of the fresh concrete, which allows the elimination of the barrier effect, leaves surfaces without removal problems for subsequent coatings and painting. It facilitates formwork removal, without greasing or staining the workpiece. It prevents cracking and bubbles on the final surfaces of the product. After formwork removal, it can be painted or treated with another type of finish. It protects the formwork from rust. It can be used as a protective agent on truck mixers or equipment, to reduce internal and external concrete incrustations. Release treatments for concrete castings in metal moulds with normal and accelerated curing. Distak-M is a ready-to-use product that must be applied as a spray. With one litre of Distak-M, correctly applied, the indicative yield is about 30-50 m², depending on the quality of the formwork. Any excess product must be removed; any overdosage may compromise the stripping or the success of the superficial appearance of the casting. With 1 litre of Distak-M, correctly applied, it is possible to consider an indicative yield of approximately 30-50 m², according to the quality of the formwork. Packaging: 25-liter can UM: €/l