speed in Turkey

...2 Panel Central Landing Door - M1 FRAMED GLASS PANEL / FULL GLASS PANEL EN 81-20/50 norms EN 81-71 EN 81-72 EN 81-58 E, EI, EW Reliable and robust structure designed for high speed, high traffic elevator systems Silent high speed /rise door Special design to avoid air turbulance reduce noise W :650 - 1300mm H : 2000-2500mm...

... water resistance. Automotive: Used for lubricating parts like ball joints, chassis, and wheel bearings (in low- to moderate-speed applications). color:green NLGI:1/2/3 packing :Drum as per customer requirment ...

... brake prevents the bucket elevator from rotating backwards and therefore damaging itself or the buckets. At the bottom cover, there is a pulley without drive and a tensioning mechanism. The speed guard installed at the bottom pulley informs the operator when the belt brakes.

...Speed Bumps slow down the speed of vehicles on public roads such as schools, hospitals, and anywhere reduced vehicle speeds are desired, solar flashers or reflective stripes increase the visibility at night.

...-speed rotating rotor. As a result, the resulting material is relatively drier. Due to these advantages, they are in high demand for use in the production of sand, crushed stone, and gravel, which are necessary for the production of concrete and asphalt. Depending on the design of the installation, they can be manufactured as mobile, with fixed steel legs, with a fixed skid chassis, or with pre-feeding. Rotor diameter: 900 mm Power: 2x200 kW Capacity: 250-350 t/h Maximum feed size: 100 mm Weight: 16,285 kg...

...DOLFİN drum washing machines (spiral washing machines) of the VDL series are primarily used for cleaning small parts that are produced in large quantities. The materials poured into the inlet section of the spiral drum are directed to the outlet section of the drum by the spirals inside. As the drum rotates around its own axis at the set speed, the parts undergo washing (degreasing), rinsing...

...OMSE has an experienced team of GSM, Telecommunication, Radar and similar telecommunication Towers. Depending on the requested wind speed and antenna area, towers with any height are being designed and manufactured either in the shape of polygon, pipe or lattice and with or without guyed wire. Furthermore, static controls of designs from customers and end-users, manufacturing drawings and manufacturing cards can be prepared by the OMSE project team.

...» design with flexible materials for safe vehicle passage » advance warning with bi-directional reflective strips » 4 warning bands on the surface (10x13.5 cm) (12110 YK) » impact-resistant durability » operating temperature range -20°C/+60°C » application areas: school entrances, intersections, park exits, etc. on streets, avenues, and urban roads where speed limits need to be reduced...

...It is a material with high stretching resistant to sea water and corrosion. Under heavy load and at bearings and bushings with low speed, at gears which operates in pumps and turbine wheels and requiring high strength.

... high travel distances (typically exceeding 30 meters and with a maximum speed of 3.5 m/s), the tension applied by the suspension ropes to the machine drive drum and the load on the machine drive drum and motor constantly varies due to the weight of the suspension ropes and cables used. This provides incredible balance, ensuring a smooth and quiet ride.

...The SC771 Model devices are designed for measuring various process variables such as temperature, pressure, speed, level, humidity, current, voltage, resistance, and other physical units in industrial environments, with dimensions of 72 x 72 mm. They are fully modular, and each module can be configured independently for open/closed and PID control purposes. These devices are used in industries...

...COVID19 MEDICAL MASK PRODCUTION MACHINE. 50 000 PIECES OF DAILY PRODUCTION SPEED. CUSTOM FABRICATION. ...

... of the machine. Through the photocells located in this section, we prevent the sugar from getting stuck by adjusting the machine's speed based on the sugar filling of the conveyor. As the sugar cubes are transferred one by one to the transport plates (the soldiers) via the conveyors in this section, the printed roll located at the top of the machine is passed over the sugar.

...-11. X and Y axis speed is 800mm/min and Z axis is 600mm/min. Linear movement is done by three nema 17 step motor. Step motors are controlled by TB6600 drivers. Control card is MKS DLC. V2.1. Raptorex Mini requires computer connection to operate and is compatible with both open source and paid software. Product works with GRBL codes. Net weight is 23kg. Our device works silent and does not create...

...Wind Barrier The viaducts on highways and highways are designed to cut the speed of the wind in extreme winds, such as bridges, to prevent the vehicle from crashing and to provide comfortable driving. These products, also called wind fences, aim to reduce the effect by dividing the incoming wind. In the meantime, it takes over most of the wind load. Design, manufacturing, installation and...

...Round and pipe-type materials are produced for sandblasting purposes. They can be manufactured from Ø48 mm to 3050 mm. The sandblasting speed can be adjusted as desired. These machines can progress at speeds of 0.5m-2m and sandblast the exterior of the pipe, thanks to the processed rollers on the input and output conveyors. Inside the cabin, there is a coating made of X120MN12 sheet.

... are readily available in the market, allowing you to continue your production with minimal interruption and reliable long-term operation. Mixer capacity m³/h: 0.5 Dry filling volume Liters: 750 Compacted concrete Liters: 500 Motor power kW: 22 Electrical connection in triangle: 380V/50Hz Motor speed rpm: 1450 Mixing arms Qty: 4 Scraper arms Qty: 2...

...• Class: F • Frequency: 50 Hz. • Outer Diameter: 141 mm • Motor Power Range: 5,5 HP - 60 HP • Axial load carrying capacity: 20 kN in 5,5HP-30 HP motors and 26,6 kN in 35HP-60HP motors • Based on 6" NEMA standards • Starting: Direct and Star-Delta • Supply Voltage: ~3, 380/415 V (-%6+%10), • Motor protection: IP 68 Mechanical Seal • Submersion depth: Standard upper limit • Temperature of working environment: Max. 30º C • Speed of cooling water around the motor: Minimum 16 cm/sec.

... operators and patients and to maintain the sterility of instruments until the right time; packing is a crucial step that should not be ignored. Our range varies from basic impulse sealers to rotary sealers with digital control and even further to rotary sealers with printer and touch screen. Sealing speed for rotary sealers are up to 14 m/sec while models with printer it is optional to have 2 line printing. ...

...Automatic Palletizing Units. Automatic palletizing units will allow you to speed up your production process. Thanks to our machine, your stacked pallets will allow you to use your stock space more efficiently, and your factory will be more organized. This arrangement will contribute to the performance of your employees in the factory and will allow you to load and ship your products in a...

...•Outer Diameter Ø6 mt •180 products per hour (20mm) •380 Volt (3 Phase) 80 kW •Automatic speed adjustment based on product thickness •5.5 KW hydraulic motor, 300lt oil capacity •Heating capability up to 200 °C •Adjustable lower and upper molds to the desired degree •Ability to process with different molds for each arm •Can achieve 8-10 Tons of pressure on each arm •Manual operation available upon request •Table dimensions 600x600...

...The TIGERFILL Diamond Wire Cutting (sawing) machine is equipped with a main electric motor that has a power of 25 hp and can achieve a maximum linear wire speed of 26 m/s, featuring an ENHANCED STARTING TORQUE. The cutting speed of the machine is controlled by a special electronic card, which maintains the tension on the wire as a function of the cutting tension and stops the machine and pulley...

...MAXIMUM POWER 3000 W TYPE 3-WING - HORIZONTAL ALTERNATOR-FIXED MAGNET ALTERNATOR, BRUSHLESS, GEARLESS, COAL & MAINTENANCE-FREE MATERIAL ALUMINUM VOLTAGE 0-90 AC CURRENT-3 PHASE-AC TOTAL WEIGHT 32 KG MAX. NOISE 50 DB LIFE OF USE 20 YEARS WING LENGTH 110 CM WING DIAMETER 235 CM WING STRUCTURE FIBER GLASS FIBER WING WEIGHT 650 GR FLANGE STEEL INITIAL WIND SPEED 2.5 M/S CHARGING WIND SPEED (APPROX.) 4 M/S TURBINE ROTATION 360*...

...Available in seven cut widths from 2.0m, 2.5m, 3.0m Suitable for mulching grassland, setaside, heavy undergrowth and material up to 6cm From 65HP to 150HP / Category 3 linkage PTO speed 1900 rpm (540rpm on request) Can be mounted either infront or behind tractor Hydraulic side shift to offset machine Outstanding Build Quality and Performance All models are shot blasted and have a high quality paint finish. Rotor lifts fallen material and mulches to leave a fine finish.

...The production of machines with and without gears also includes the production of speed regulators.

... Siemens PLC and a touchscreen. Our machines with 5 and 10 channels can produce at a speed of 500 units per minute. The machines can be manufactured entirely from stainless steel as an optional feature. TECHNICAL SPECIFICATIONS • Weight Range: 1-10 g (Adjustable) • Stick Width: 17 mm (Adjustable) • Stick Length: Max. 170 mm (Adjustable via screen) • Filling System: Volumetric Containers : 5 Channels / 10 Channels • Speed: 250 units/min - 500 units/min • Reel Width: 200 mm 400 mm • Products: Sugar, salt, black pepper, gold coffee, and other granular and free-flowing products...

...Information: Load capacity up to 1500kg Single-person operation Equipped with 2 parking brake devices Height adjustment up to 250 mm Self-locking double speed worm gear Safe in all positions Compact space-saving design Easy to move, ergonomic use 360-degree rotatable, easy rotation even under load Oil pan and tool tray Suitable for truck, ship, and industrial engines Features: The Weitner HV...

...sandblast semi-finished and finished products moving on roller conveyors, and the presence of a conveyor system are significant advantages. Conveyor speed can be adjusted for each load depending on the part type and sandblasting surface through a digital speed control feature. Machines are designed and manufactured based on the size, weight, and daily quantity of parts to be sandblasted. Conveyor lengths can be customized. It can be manufactured to conform to a suspended conveyor system.

... from high-quality European brands such as SKF, Festo, Siemens, FAG, and Nord. 2) Full servo control system to ensure stable operation of the equipment and avoid static electricity. 3) The electrical control system is centered on the programmable controller PLC: to ensure stable and reliable operation of the equipment, and consistent performance. 4) The packaging speed and box sizes can be adjusted...

...Technical Data Main Motor Power : 55 kW Main Motor Operating System : Inverter controlled speed Pulley Diameter : 80/90 cm Cutting Stroke : 400 cm Rotation : -5/185 degree Length of Wire : 80-150 m Cutting Capacity : 12-25m^2 / hour ...