leak standard

...The ASM 390 and ASM 392 are the best leak detection solutions for the semiconductor and display industries, as well as for other demanding applications where short evacuation times and high sensitivity are crucial. Both are compliant with the Semi S2 standard.

... leak testing cycle on the market. Automotive, domestic appliances, medical, aeronautic, defense, fluid and electrical components, food and cosmetic packaging Differential pressure decay leak measurement Large range of leak measurement (∆P) F.S.: 50 Pa, 500 Pa or 5000 Pa Mechanical or electronic regulator from vacuum to 20 bar 128 programs Setting on line (via USB) 2 languages (English + other one) Manual calibration on front panel with calibrated leak Data storage on internal memory or USB key Weight :15 Kg Dimensions:(WxHxD) 537 x 157 x 381 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C...

...Filter leak monitor suited to filter control applications after fabric dust filter type (baghouse) arrestment plant. Measured parameters:Dust Technology:Electrodynamic™ Probe Electrification Measurement/Monitoring capability:0-500 mg/m3 (Leak monitoring) Stack/Duct diameter suitability:0.5 to 8 m Flue gas temperature:250°C standard, 400°C option Baghouse:Yes Cartridge Filter:Yes Ceramic Filter:Yes Coalescent Filter:Yes Cyclone:Yes...

... of the PD200 e.g. through so-called safety ladders to the corresponding flat roof.The impulse current measuring system easily wins the weight comparison with its previous model. Although the single components partially are pretty heavy (e.g. the transformer), the total weight could be reduced by about 20% (from 11.2 kg to 8.6 kg). On top of the housing there are clearly visible signal lamps - one standard impulse signal (green) and one short-circuit signal (red), incl. integrated tone generator. Detected fluid:water Other characteristics:with visual alarm Applications:for flat roofs...

...Be confident in your package integrity and meet ASTM package testing standards with the convenience and simplicity of our standard Table Top Package Testing Systems. Our full-visibility acrylic test chambers are ideal for package testing small product packaging. Choose from a full range of our standard PACKCHECK Vacuum Testing Systems or contact us to discover how Clarity Lab design and build custom solutions for our customers.

... carried to other floors, put into a truck or a car. Foldable.when not in use, it can be hung up on a hook on the wall. No hydraulic pump to repair, no oil can leak out,no seals to replace. Ideal for grocery stores, all kind of small stores, pharmaceutical industry, drugstores, offices, schools, hospitals etc. Capacity:300 kg Max forks height:145 mm Max forks height:145 mm Min forks height:85 mm...

... - Powered by 4 rechargeable or standard replaceable AA batteries - Fast charging in 4 hours - Charging possible even without a docking station - Communication with PC via USB interface - Explosion protection: TÜV 07 ATEX 553353 X, II2G Ex d e ib IIB T4 Gb, IIC with the use of the TG8 case - Measurement function: BVS 09 ATEX G 001 X, PFG 08 G 002 X (measurement function only on EX-TEC GA ® 680, 650) - Selective infrared sensors for hydrocarbons and carbon dioxide - Semiconductor sensor...

... K 6911 standard of: antistatic materials flooring materials paper, packaging materials paints, pastes, paints fibers, clothes, fabrics adhesives, greases glass, concrete, ceramics plastics, film materials, foils etc. Up to 2000 measurement results can be exported to USB memory stick The conductivity meter impresses with its compact design, a color 7.5 “TFT touch display and user-friendly menu navigation. measuring range:10^3 – 10^14 Ω Measuring method:Constant-voltage Apply, Leak-current Dimensions:330mm x 270mm x 113mm Weight:2,4kg...

...A leak in the wall of a container below the liquid level can be indicated. A statement about the condition of the collection area, dome shaft, etc. cannot be made. Leak detection probes meet the requirements of Class III of the European standard EN 13160.

...High-security double-tube heat exchangers play a crucial role when preventing fluid mixing is essential in the event of a leak. They are widely used and are the standard in the chemical industry, energy sector, both heavy and light industries, as well as in oil and gas, maritime, transportation, refrigeration, and food and beverage sectors. Kelvion has a long history of developing groundbreaking...

...Installation is simple as no chain or belt drives or gear reduction motors are required. Pumps can be directly connected to standard speed lowcost electric motors. By simply changing the shaft rotation, pumps can be used to pump in or out through the same piping. Pump model on baseframes with motors:MC-3-SS / MC-3-SS movable Motor size:5.5 kW (7.38 HP) RPM 50 Hz:1‘450 RPM 60 Hz:1‘740 Voltage:400/440 V, 50/60 Hz, 3 ph other voltages on request...

... The STIRWELD Response We have developed tools that enable welding to achieve perfect sealing. The operating pressure is higher (possible refinement of the cover). - Less expensive (FSW welding simply replaces TIG or FE welding) - Faster (the welding is done in the MOCN) - Perfectly sealed - Higher operating pressure (refinement of the cover) - Leak-proof assembly of multiple cold plates FSW for cold plates and heat pipes is becoming widespread in German-speaking countries and the USA.

...Mikropor offers a wide variety of solutions, including high-efficiency EPA, HEPA, and ULPA filters, as well as leak-free variants of hoods and boxes. Through individual testing, Mikropor guarantees performance and impermeability (tightness) using the EN 1822 testing standard. All EPA, HEPA, and ULPA class filters come with test certificates.

... sensitive and selective to hydrogen gas. Additionally, the instrument has a very short recovery time to enable new measurements to be performed immediately. 0.7 ppm H 2 in air Sensitivity:0.7 ppm H 2 in air Response time:< 1 s Warm up time:< 10 s Outputs:Earphone, standard 3.5 mm (1/8 in.) jack, > 8 ohms Battery Type:Rechargeable lead batteries (gel electrolyte) Battery Capacity:13 h at 20°C (68°F) 6 h...

... diversity of types, sizes and formats ensure solutions for all applications. For years, HONSEL has focused primarily on the manufacture of non-standard blind rivets. Material:Aluminium / steel Material:Aluminium / stainless steel Material:Aluminium / aluminium Material:steel / steel Material:Stainless steel / stainless steel Material:Copper / steel Material:Copper / stainless steel...

... sealed and can be designed with a wide variety of sensors for monitoring, as well as in a wide range of versions and materials. As standard, the magnetic coupling is used in combination with pumps for the chemical industry. Type: Gear Intended use: Industry, chemical, pharmaceutical Other features: ATEX, for explosive zones Mounting type: Magnetic...

... event of a leak or other hazardous situation. Bellows Shut-off Valve Invest in the longevity of your industrial facility with leak-free, environmentally friendly industrial standard bellows valves from Fergo. We offer the bellows shut-off valve in housing materials such as spheroidal graphite, gray cast iron, and steel. They are available in standard pressure ratings...

...Bubble Tea Club - Reusable Bubble Tea Cup Set Double Wall Keeps your drink cool for a long time! - BPA Free The cup is made from BPA-free infused acrylic, a 100% food-safe material for the cup, lid, and straw. - Ideal Size Easily fits most standard cup holders. - Leak-proof Lid The lid features a silicone seal to ensure it is airtight. - Lid with Cap Put on the cap and you can toss it...

...Most industrial process temperature control units work through the pressure exerted on the water of the process utilities: this is convenient in most “standard” cases, given the higher efficiency developed by the system. However, some critical process issues can make this type of operation difficult: this is the case of machines that leak fluids, or with leakage, and that it is not convenient to...

...Useful functions such as limit monitoring, leak stop operation, etc., can be easily selected by tapping on icons on the homepage. the teco cs devices are designed for operation with water, depending on the model, up to 95°C/140°C/160°C/225°C. The 95°C series has been expanded with three variants offering higher capacities. The new, cost-effective models are designed for larger consumers and feature heating capacities from 18 to 36 kW, cooling capacities from 50 to 120 kW, and pump rates from 110 to 170 l/min. Usage: Cooling, for heating purposes, for injection molding machines, process...

... are controlled manually, electrically or pneumatically.       All brands can be used for the drive.  • THERMO-DK valves are metallically sealed and function without     any additional sealing materials.  • The leakage rate is less than 1 % (based on the cross-section).     THERMO-DK valves are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house     production allows us to deal with virtually any customer requests.   • Due to systematic standardisation in detail and our long-term     experience, THERMO-DK valves are not prone to malfunctions.

...The Plugtite aperture has been designed and engineered to give the plug greater compression than standard solid plugs ensuring a perfect seal whilst still being able to cut to size if needed. Greater resistance to most oils within temperature range from -25°C up to 90°C Does not shrink, leak or discolor Resistant to sunlight for greater shelf life, does not split/crack or deteriorate Easy to use...

...Application Areas: Industrial Combustion Technology / Steel Industry Single-piece housing, tightly sealed, central flap disc With blow-out-proof shaft Design for clamping between flanges according to DIN EN 1092-1 Length according to factory standard Leak rate A according to DIN EN 12266-1 Max. permissible operating pressure 2 bar For all combustible gases according to DVGW worksheet G 260, EN...

...The Adlema BT1000 Standard Level Leak Test Devices, using the pressure drop method, operate within a measurement range of -1 to +25 Bar. Devices capable of testing leaks caused by manufacturing defects require longer testing durations compared to advanced devices. Standard level test devices, which can be preferred for applications with lower precision, are ideal for capturing relatively large...

...The FITOK compression fitting is based on a dual compression ring system. This system ensures secure and technically gas-tight connections. Our compression fitting system guarantees safe and technically gas-tight connections. A leak-free operation of the fitting is ensured by strict quality guidelines. FITOK fittings are compatible with other dual compression ring systems. Standard materials for all FITOK pipe fittings are stainless steel 316 and brass. Special alloys such as Hastelloy or Monel are available upon request.

...The 55800 is a high-sensitivity and fast-response detector. It detects combustible gases, hydrogen, and refrigerants. It features an intelligent sensor that detects environmental conditions to eliminate the potential for false alarms. Color LCD display. Delivered in a molded case with 2 batteries, a leak test bottle, and replacement filters.

... printing, making them an ideal choice for brands looking to enhance their product presentation. The Aluminum Screw Caps offer various lining types to cater to different needs, including SARANEX for standard use, PVC/PVDC FREE for pressure resistance, SARAN-TIN for extended storage protection, and DOUBLE SARANEX for additional pressure resistance. With a focus on quality and innovation, these screw caps...

... liters of liquid products; Internal locks designed for leak-proof sealing on the lid... STURDY, DURABLE, RELIABLE Your products will not collapse under road and storage conditions. CONSUMER'S PREFERENCE Measurements in European Standards; 30x28x33 cm.

... worldwide. Liron superior capacitor can match low ESR, long lifetime, low resistance, low leak current, High working voltage and more different requirements. PS series is a standard dounsized radial capacitor that matches following SPEC. PS standard dounsized radial capacitor can be used in power supply, frequency changer, comsumer electronics, commercial unit, lighting, servo system, new energy...

... as the installation of refrigerant detectors, must be implemented. The MVR-300 features acoustic and optical alarms. The device communicates with building technology via Modbus, and two integrated relays can be used to close valves or trigger alarms. The MVR-300 fits into standard flush-mounted boxes, and with the help of the decorative cover, the device is unobtrusive in the room. Complex maintenance is not required, as calibrated sensors can be installed with minimal effort in addition to simple on-site calibration. Versions are available for R410a, R407c, R404a, R32.