gas machinery Italy

... with 360° rotation for use in any position; - 8 meter pipe with quick release; - Safety valve included (in case of breakage block the gas); - Practical carrying case; - Noise level 83db. Example model:RAFALE 65 Max power (kW):37-66 Supply:Propane Gas pression (bar):1.5-3.5 Gas consumption (Kg/h) :2.6–4.8 Ignition:Electronic...

...Veloxbloc manufactures, utilizing state-of-the-art machinery and highly qualified personnel: - fastening collars; - metal hose clamps; - irrigation systems and equipment for gardens; - fittings for plastic pipes; - velinox; - veloxfort. It also handles wiring for electrical systems. Specifically, it produces gas clamps: Velox wing: clamps with butterfly closure featuring an 8mm galvanized steel strap;...

... positioned under the tank. The semi-annular filling tank made of stainless steel allows the use of nitrogen in the tank. Filling occurs through a slight pressure of inert gas, preventing the dispersion of volatile components. The conveyors are configured so that only one operator is needed. Production: up to 1,000 bph (bottles per hour).

...Liquid chillers for low temperatures, also in outdoor environments The RW CW series of process fluid coolers (water, water/antifreeze) are water-cooled and operate with environmentally friendly gas compression. They allow cooled liquid temperatures between -8°C and +20°C. In standard design, ambient temperatures of up to +40°C are permissible, but in the “RW ax/HTA” version even higher ambient temperatures can be achieved. IP54 degree of protection as standard, allowing outdoor installation without a protective roof. Temperature Range:from -8°C up to 20°C...

...wood and fiberglass poles for electricity, telephone and lighting lines. Bases for machinery and urban accessories. Remove dust and loose parts from the trench or the location where the casting takes place. • Saturate waste with water. • Wait for the excess water to evaporate; To facilitate the elimination of non-absorbed water from the support, use specific liquid vacuum cleaners or use...

...pumps, hydraulic cylinders, presses, compressors, rotating shafts, measuring devices, engines, flanges, machine tools, housings, household appliances, and industrial machinery of any sector. For a seal to function correctly, the material it is made from must have well-defined characteristics: it must be chemically resistant to the fluid it contains, it must not damage the surfaces it comes into contact with, and it must withstand the operating pressures and temperatures.

...The Gas on/off switch is installed on cultivators and tillers and serves to turn off the engine when the lever is moved to the zero position.

... MODEL ES150T – CAPACITY 26 MC – EVERY MODEL HAS A BURNER THAT CAN BE DIESEL, LPG, OR NATURAL GAS – CAN HAVE A DIRECT FLAME OR A HEAT EXCHANGER – PTO DRIVE, ELECTRIC DRIVE, OR DUAL – LOADING AUGER OR TRAY – STAINLESS STEEL PANELLING – ELECTRIC CONTROL PANEL – TANK FOR DIESEL – DUST COLLECTOR WITH CYCLONE AND MANY OTHER OPTIONS.

... acting in both directions and thus serve to axially locate a shaft in both directions. These bearings, in both versions, have been designed to withstand only axial loads and must not be subjected to radial loads of any kind. Series: 51100, 51200, 51300, 51400 APPLICATIONS: Earthmoving machinery Agricultural machinery Pumps Cleaning Equipment / Industrial cleaning machines Bottling / Filling carousels Electric motors Fitness machines Metalworking machines Glass, marble and woodworking machines Automatic opening systems Oil Industry Oil and Gas rotary tables Vertical shafts ...

...mixers, compactors, sintering machines, oil, gas, purification, lifting, towing, traction, bulldozers, excavators, dumpers, containers, industrial production. Construction of hydraulic presses and revision of hydraulic components. Mini power units and mini power stations upon customer request. DISTRIBUTORS OF PNEUMATIC COMPONENTS PNEUMAX Tie rod cylinders, compact cylinders, ISO cylinders, CNOMO...

ROTAIR SPA has over 50 years of experience in the design, production, and distribution of a wide range of high-tech products for construction and agriculture. Rotair designs and manufactures a broad array of products such as portable compressors, electric compressors, multifunctional dumpers, hydraulic hammers, and cutters. Rotair's projects are always environmentally friendly and comply with most...

M.A.M. Forni Eredi Malaguti Aurelio is highly specialized in the production of ovens and related assistance. With over sixty years of experience, the company based in Modena manufactures equipment for pizzerias, hotels, restaurants, and public venues. Among the products offered are ventilated ovens, gas and methane ovens, pizza ovens, tunnel ovens, and rotary ovens. Additionally, there are garden...

... machinery and equipment, it specializes in steel and cast iron piston rods, pins and bushings for feet and connecting rods, cast iron, bronze, steel, and aluminum pistons, valve rings, cylinder sleeves including nitrided steel, pre-compression boxes for ring holders, compressors for PET blowing, lubricated compressors, dry gas compressors, and air compressors, also providing spare parts, accessories...

Sub Sea Services was founded in 1995 and operates throughout the national territory in the field of underwater and maritime work. The staff consists of highly experienced divers, qualified for diving with air and mixed gas breathing apparatus. The company guarantees interventions carried out with absolute safety and with state-of-the-art machinery; among these, we highlight interventions in dams...

...B&G specializes in the production of spheres for industrial valves for water, air, and gas systems. Thanks to its advanced technology and the use of precision CNC machinery, diamond-coated and chrome-plated spheres are produced with precision thickness, ensuring absolutely superior quality for the product. The produced spheres are classified into two main sectors: standard valve spheres and...

Giacoletti is a company specialized in providing machinery and services for welding and metal processing. With a wide range of products and services, the company is committed to meeting the needs of professionals and businesses operating in the metallurgical and welding sectors. The key services and products offered include a vast selection of arc welding machinery and metal cutting equipment...

...The company carries out installations in Italy and abroad for mechanical, electrical, and hydraulic systems in the steel, petrochemical, energy, and waste treatment sectors, wastewater treatment plants, chemical plants, machinery and equipment, decanters for sludge, heat exchangers, gas holders, bridges for primary tanks, clarifiers, Archimedes screws, plants for energy production and distribution, aqueducts and irrigation systems, gas pipelines and oil pipelines, pneumatic transport for powders, recycling plants for municipal solid waste, incineration furnaces, and forced conduits.

... treatment washers. The products include surface treatment and finishing systems, powder and paint coating systems; cataphoresis and anaphoresis systems, automatic and manual powder application booths, water curtain and dry painting booths, static and continuous polymerization ovens. The company only manufactures machinery and systems of the highest quality and ensures extreme safety. Their headquarters is located in Carate Brianza (MB) on via Rivera.

Since 1975, we have been passionately and meticulously producing industrial steam generators and steam machines for agriculture. What sets us apart is the reliability and longevity of our products. We manufacture boilers with variable output ranging from 150 to 2,250 kW/h (200 – 3,000 kg/h steam) equipped with electrical panels that meet Industry 4.0 requirements. We offer tailored solutions such...

La Franco srl has been producing air conditioning, heating, and humidification systems for livestock, agriculture, and the industrial sector since 1962. The range of products we offer is very extensive and includes hot air generators powered by water and gas, evaporative coolers, centrifugal humidifiers, and nebulizers. Recently, the offering has expanded with the production of custom modular...

For over 50 years, CB Srl has specialized in the production of tools and accessories for professional kitchens, shops, and supermarkets. In particular, it manufactures cooking appliances such as electric and gas planetary rotisseries, hot and cold ventilated rotisseries, lava stone and electric grills, electric pizza ovens, and gas or electric gyros for kebabs. Among the items for shops and...

... compliance with quality standards for products and services. Prevent pollution and, in particular, control and reduce gas emissions into the environment and waste. Enhance the knowledge, competence, and awareness of our staff through ongoing technological development activities that facilitate easy and intuitive interaction with our products. We embrace challenges and things that endure over time, just like our ovens.

... expectations. Flexibility: the ability to adapt to the specific needs of each customer, always finding the winning solution, characterizes the added value of our products. We produce industrial filters in AISI 304/316 Duplex and Simplex, basket and cartridge types, self-cleaning, panel filters, and custom designs based on customer specifications. Hydraulic oil filters, filters for water, gas, and air, filters and cartridges for electroerosion. Oil separators for compressed air and interchangeable cartridges for the best national and international manufacturers.

... promptly provide technological solutions for filtration, fluid handling and dosing, electronic instrumentation (also custom-made), probes, transducers, and accessories. The company offers odorizers, cabinets, reduction booths, user filters, inline filters, corner filters, vertical filters, flanged and threaded filters. Industrial electronic instrumentation and sensors, temperature probes, level and pressure transducers, and weighing devices are also available. Production of gas cartridges and filters. Baskets, bags, panels, pumps, electronic instruments, probes, and sensors.

...PASSAPONTI metal cleaning technology designs, develops, and manufactures machines, technologies, and systems for cleaning components in the mechanical industry, specifically in the automotive, aerospace, railway, and Oil & Gas sectors. The program encompasses everything from application know-how to machinery, as well as contamination control, for both production applications and MRO (Maintenance...

... capable of executing heat treatments, vibratory finishing, and galvanic treatments. We have a wide range of machines, including multi-axis automatic lathes with numerical control and cam-operated lathes. We produce parts for sectors such as: gas, welding and cutting, footwear machinery, automobiles, motorcycles, measuring and control instruments, hydraulics, photography, electrical parts and connectors, and medical components. The materials processed include: steel, aluminum, titanium, plastic, copper, and brass.

... standards. The available filter media include: PP, PA6 and 66, PTFE, PVDF, ACF. The construction variants ensure maximum interchangeability with all major global manufacturers. These elements are used in the fine chemicals, water, pigments and dyes, food, pharmaceuticals, gas, and air sectors. Tekpro also produces pleated filter elements using state-of-the-art machinery. The product range consists of cartridges for various applications, such as welding fumes and powder coating booths.

... distributors for major European manufacturers: VITKOVICE and WYSTRACH for cylinders and cylinder packs, VTI and MULLER for valves, DAMOTEK and WEH for gas machinery and accessories, PROPHOS CHEMICALS for extinguishing agents, and CYONOMIC for cryo-sandblasting equipment. Our product offering is also complemented by various ancillary services, to provide a complete and tailored product at 360°: cylinder testing and its components, customizations, painting, gas refilling (CO2, N2, Ar, mixtures), and delivery of LCO2 tanks on national territory.

...Promech MC is a mechanical design studio with over a decade of experience in designing production lines, special machinery, and automation systems. We support our clients through every phase of the design process, from the initial idea to the completed project, always offering functional and innovative solutions while fully respecting budget and time constraints. Promech MC has extensive experience in developing machinery and automation for various sectors such as gluing, packaging, pharmaceuticals, medical, oil & gas, automotive, and energy.

... the automotive sector - Machinery and Plants in the steel industry - Equipment for mechanical processing - Oil & Gas - Civil and industrial steel structures Continuous training and staying updated with new technologies available in the market enable us to tackle and resolve increasingly complex issues, striving to provide simple and effective solutions. We support our clients by offering a...