pneumatic Italy

... epoxy powder while the other components are galvanized. The pneumatic centering device with motorized rollers is a module for builders to be completed and adapted to an automatic line. It is available in two versions: Manufacturers version and "plug and play" version: In the "manufacturers" version, the centering device is supplied complete with: - Motorized roller conveyor with start and stop...

...The DV series pneumatic volumetric dispensers are suitable for the precise filling of a wide range of food products (creams, sauces, jams, honey, yogurt) - or non-aggressive chemical-cosmetic products (creams, lubricants, detergents, liquid soap, shampoo). Made of stainless steel, they come with a tabletop support or an adjustable height support plate and a supporting column; the dose is easily...

...Custom brass pressure reducing bodies are designed to regulate and maintain a constant pressure in hydraulic and pneumatic systems, ensuring efficiency and safety thanks to the durability of brass. Made from high-quality brass, these reducing bodies offer exceptional resistance to corrosion and a long lifespan, even in challenging operating conditions. The ability to customize these components...

...PNEUMATIC ACTUATORS - SERIES 83 MOD. 100 - PNEUMATIC ACTUATORS - SERIES 83...

In Erbusco, in the province of Brescia, we produce, through metal turning, custom parts within the dimensional range of 0.5 mm to 40 mm in diameter, using various types of materials such as brass, aluminum, AVP, and steel. Experience. Versatility. Technology. These are the strategic pillars of Eredi Baitelli's operations, a company specialized in turning processes and turned metal components made ...

GNALI BOCIA is located in Lumezzane, in the province of Brescia. It is a company founded by the Gnali brothers in the late 1970s, specializing in the production and trade of products for Gas Gpl, water, and fluids such as: regulators, taps, and fittings for GPL, technical gases, and water. With extensive experience in the sector and acquired know-how, the company represents an important reference ...

...VALVE STRUCTURE • The body and blade are made entirely of thick steel • Construction materials: carbon steel. Stainless Steel Aisi 304-316 available upon request PNEUMATIC CONTROL Cylinder consists of: • 2 exhaust reducers • Distributor 5/2 – 1 EV 48V ALT • Supply D 6/8 MAGNETIC END OF TRAVEL • Attachment on the cylinder INDUCTIVE END OF TRAVEL • Attachment on the body of the guillotine ø 18 T 10/36 V DC...

...RAC AX83 Pneumatic tool with rivet holding and nail recovery. Standard rivets Ø 4,8 only in aluminium. Multifar rivets Ø 4 only in aluminium. Maximum force 5372 N. Stroke 19 mm. Code:70AX83...

...New pneumatic packing machine bar welding with pneumatic regulation of the height of the head for closing in low of the envelopes. Ideal for welding envelopes for different measures of clotes for more transport cleaning and sure. FEEDING:230 V ABSORPTION:0,166 Kw SIZE:1000x620x1820 WEIGHT:Kg 57 WORKING PRESSURE:Atm 6...

...Hydraulically or Pneumatic operated. TYPICAL APPLICATIONS Irrigation, water treatment, animal feeding plants.

... complex patterns, including spring vent inserts. Blast away vulcanized rubber using 100% pneumatic or electropneumatic Dry Ice blasting units, manual or robot-operated. Produce Dry Ice blocks, pellets, micropellets, flakes or dust; store and transport them; protect your workers: we can offer you everything you need for Dry Ice. Dry ice blaster Dry ice accessories Dry ice...

AMG Assemblaggi positions itself as a leader in the field of general mechanics and component assembly, specializing particularly in the automotive sector. Our company is recognized for excellence in the production of spirals for compressed air, made from cutting-edge materials such as PA12, PU98, PU95, and PA6. We offer a wide range of fittings in diameters of 1/2", 1/4", and 1/8", ensuring soluti...

...Timed pneumatic stamping machine Cliché holder 120X60 complete with 350W-24V heater Temperature 0°-300° regulated by digital thermostat Belt advancement with electric motor controlled by timer Printer power KG 1500 at 6 BAR Working surface mm. 400×350 Front guard with safety micro-switch Synchronized two-hand start buttons CE standards 230 single-phase Instruction manual...

For over 50 years, Vigevano Inbocsav, located at Via Montebello, 40 in Vigevano, has been creating custom machinery for stamping, including: numbering stamping machines for footwear, machines for sole manufacturers, machines for leather goods, hot stamping, stamping on mats, stamping on plastic materials, stamping on plastic sports products, stamping on promotional items, hot stamping for brand lo...

...Semi-automatic stuffing machine for pieces of meat in fibrous casings, fibram, etc. and/or elastic netting and collagen up to a diameter of 170 mm. Uses round, oval, square, and rectangular molds. Standard stuffing chamber of 500 mm; Special machines with chambers of 700, 800, 1,000 mm. Pneumatic or electropneumatic operation with PLC. Model: IF 5600 Application: Casing/net/collagen/net Dimensions: 325x70x150 (H) cm Production up to: 1.5...

... (in sequence) is done using double-acting valves with pneumatic control. The largest standard model in this series has a filtration area of 160 m², capable of handling a load equivalent to a community of about 50,000 PE. A distinctive feature of this series is its low energy consumption, which becomes even more apparent with the increase in plant potential. - Gravity filtration with limited pressure loss. - Continuous filtration without backup units for backwashing phases.

...Stainless steel ball valves, check valves, non-return valves. Pressure gauge isolators and pressure gauge valves. Manual or automated valves with pneumatic actuator.

...30.415/PN Type: Pneumatic bending matrix Amada Height: 135.00 mm Resistance: Max 100 T/m Steel: C45 Lengths: L 1000 mm...

... thickness of the wall to inject. The drill bit to be used must have a diameter of 12-14 mm. Once the holes are finished, the dust produced by drilling is required to be eliminated. Consilex Barrier Cream should be injected into the wall using the special caulking gun for 600 cc or ml bags (of the type commonly used in sealants and mastics), both manual and pneumatic, according to the following procedure...

...Shot Blasting Chamber Abrasion-resistant Coating Automatic Door Turbines Abrasive Delivery Valves Bucket Elevator Pneumatic Separator Electrical Panel Onboard Electrical System Pneumatic System Filter Width of Sandblasting Drum: 1250mm Diameter of Carpet Disc: 1000mm Rubber Carpet: 1480x4900mm thickness 16mm Loading Volume: 0.45m3 Hourly Production: 5000÷6500kg Required Suction: 6000m3/h Installed Electric Power: 31.6kW...

Errecinque is a leading company in the field of thermoplastic piping, injection molding of plastic and rubber parts for industry, particularly for the automotive sector. Established in 1981, the company boasts 4 production facilities in Italy, 1 in Romania in JV with Rochling Automotive, and a subsidiary with a warehouse in the USA near Detroit. Errecinque designs, develops, and manufactures produ...

... - Viton - Gasket profile: for sealing only on the disc or covering the flanges - DN5482 splined drive shaft or ISO 5211 square, both in standard or extended length - ATEX certified version upon request - Manual, motorized or pneumatic actuators...

...SPECIAL MALES - Manual: roughers and finishers - Machine: • with straight grooves for through holes • with spiral grooves for blind holes MANUAL INSTALLATION TOOLS AUTOMATIC INSTALLATION TOOLS Electric or pneumatic, with automatic reversal CUTTERS To remove the dragging stub THREADED GAUGES - Pass/no-pass threaded gauges for threaded holes - Pass/no-pass threaded gauges for inserted threads EXTRACTORS To remove incorrectly installed inserted threads REPAIR KITS - One-dimensional - Multi-dimensional | back to top |...

...Automatic double bending machine for bars up to Ø 50 mm (#14). It works automatically and bends any kind of shapes, positive and negative bends included. Version with automatic feeding and discharging units, which fold away (Optional) they allow the minimum distance of 980 mm between the two bending mandrels. Automatic system for bars feeding and discharging Ejection cylinder pneumatic...

... single-spindle automatic lathes and mechanical processing starting from a hot-pressed, turned, or die-cast raw piece. We are an ISO 9001:2015 certified company, and our clients rely on us as a long-term strategic partner. We have a state-of-the-art metrology room and an ISO-8 clean room. Gabrieli srl specializes in automatic turning and the processing of hot-pressed parts. Some product examples include: pneumatic fittings, screw fittings, hose connectors, nuts, closure screws, etc.

...The machine is equipped with three options, so the operator chooses which working mode to use. The movement of the welding arm takes place, however, in total safety, thanks to a mechanical emergency device which stops its descent. The Semi-automatic Angular Packaging Machines with pneumatic sealing arm are equipped with two Teflon mesh conveyor belts with independent speed control. The first tape is in the sealing area, while the second is in the shrink tunnel. The first belt automatically transports the product onto the second...

...Two-way inclined valve with integrated pneumatic actuator, suitable for controlling high-temperature fluids and steam in heavy-duty high-frequency applications. ADVANTAGES: • Valve status indicator • Design suitable for battery mounting of multiple units • Cylinder rotatable 360° • Adjustable cylinder without the use of a wrench • Optimized performance up to 10M cycles...

...Static base with pneumatic/hydraulic drive for drills, milling machines, machining centers, etc. It can mount collets with a simple cone type BA (type DIN 6343), traction type BE (the collets do not move; like the BA-), etc...

...Non-stop hydro-pneumatic cultivators...

... viscosity oil over medium to long distances. Characterized by a robust soundproof protective structure, they feature a pneumatic type exchanger and a three-stage air discharge system, which, combined with the absence of striking mechanical parts prone to breakage, ensure low operational noise (only 77 DB) and a long lifespan. The real double effect ensures better efficiency and lower air consumption.