cooling-system Italy

MITA Cooling Technologies supports engineers, production managers, and industry operators with preliminary performance and consumption analyses, proposing the best cooling solution for them. It provides cooling technologies for process industries, cogeneration, the HVAC sector, and commercial and industrial refrigeration. Among the proposed solutions are open and closed circuit cooling towers, eva...

... the electronic modulation of fan speeds based on temperature. Adiabatic operation during warmer periods: external air passes through the humidification pack to be pre-cooled before being directed to the finned coils to perform its cooling function: efficiency increases. This also allows for operation at lower ambient temperatures.

... system is also available. This variant is equipped with a double sealing bar with a 10 mm sealing width, electric pedal drive, mobile nozzles for air intake and gas injection, adjustable timers for suction, intake, sealing and cooling. Max. seal length:mm. 450/mm. 600 Seal width:mm. 5 Sealable materials:PE-PP-AL/PE ...

... the spread of cooling liquids. The choice of the drilling technique is decisive when works are done in unique and precious settings where painting, ancient plasters and stuccoes are present and have to be saved and preserved. The borehole diameter is designed according to anchors size it is usually about three times the steel bar diameter; the length of the anchor is another parameter to be evaluated for the right choice of the borehole diameter. ...

... / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen • Heat exchanger on mixing chamber for heating / cooling processes...

... filtration of civil and industrial wastewater, clarification of cooling water in the metallurgical industry, algae removal, pretreatment for membrane ultrafiltration plants, pretreatment for ozonation plants, finishing treatment with activated carbon. - Low initial and operating costs of the plant - High efficiency and reliability for the removal of suspended solids, including colloidal ones - Exclusive backwashing system that uses raw water instead of filtered water - External sand recirculation system...

...Our industrial process cooling machines are the perfect solution for the countless requirements of production processes. The choice of a process cooling system is linked to two main aspects, the first is its TCO (Total Cost of Ownership) i.e. efficiency, i.e. electricity consumption, and environmental impact, with both present and future regulatory restrictions. Our chillers are distinguished not only by their high performance, but also by their low environmental impact due to the use of natural gases such as R290, ammonia and to CO2 (they comply with ERP TIER2 regulations).

...Technical features: forced ventilation and cooling system for warehouse Autonomous ventilation and air supply units complete with: - external air louver section - supply air fan section for ventilation - section prepared for post-heating expansion - filtering section - special version with ATEX components for explosion-risk areas - power and electronic control panel - digital central unit for...

... emissions at partial load. Thanks to the integrated three-way valve system. HEATING CAPACITY (HIGH / LOW): 2500 kW TEMPERATURE RANGE: 60 - 110˚C POWER SUPPLY: 400 V 3ph / 50 Hz HEIGHT (M): 2.896 LENGTH (M): 6.06 WIDTH (M): 2.44 WEIGHT (KG): 9800...

...ENGINE COOLING FAN UNITS We can offer tailored solutions, adapting them to the available spaces, or provide standard accessories. Among these, we particularly offer standard solutions for engine cooling systems; centrifugal fans on wheels, with brakes, available in various capacities and powers: • 4 kW • 5.5 kW • 7 kW • 11 kW The fan units can also be equipped with control inverters, to make the...

... many guests or for your daily or occasional consumption. The dispensing system without added carbon dioxide allows you to enjoy the beer directly from the keg into your glass. Thanks to its integrated cooling system, once opened, the 6L keg stays fresh for 30 days at a temperature of 3°C. The wide variety of prestigious brands allows you to enjoy your favorite beer! You can choose, for example, from Beck's, Franziskaner, Leffe, Stella Artois, Hoegaarden, Jupiler.... Code: 09914 Category: Draft Systems...

...Our manufactured dryers are divided into two subcategories: PLE and ES. PLE Series: This is a new type of compact dryer designed to support the lamp. Its use is versatile due to the possibility of multiple adjustments, ensuring optimal performance for the required application. Its cooling system is based on carefully studied airflows to optimize the dispersion of heat produced by the UV lamp. ES...

...Bresciaclima Service offers installation services for air conditioning and heating systems for regional trains, double-decker trains, high-speed trains, trams, and subways. Each system is designed according to the dimensions of the areas to be climate-controlled: carriage, corridor, dining car, and any compartments.

... food and fresh or frozen products. They are ATP certified for both IN (0°C) and IR (-20°C) and comply with health regulations and requirements. These fittings are perfect for maintaining a more or less constant temperature, can be equipped with a cooling system, and can be structured for the transport of hanging food thanks to the application of load securing straps and shelves. We operate on various types of vans such as Nissan NV 200 and NV400, Ford with Connect, Transit, and Courier, Fiat with Doblo, Fiorino, and Ducato, Iveco with Daily, Renault.

... system consists of a lower belt and an upper belt, made of fiberglass with antistatic treatment, Teflon coated. Compensating rollers guide the belt, excluding the formation of folds and corrugations. The 910mm long heating surface is made up of a series of 6 laminated profiles that form curved panels. The pressure system can be single or double. The scraper bars in Teflon graphite allow the total detachment of the outgoing pieces, finally the cooling station ensures that the pieces may be unloaded by hand or automatically cool down in such a way as not to leave marks. ...

... sensor Pre and post sample dilution (dilution ratio from 1:2 to 1:100) Graphical representation of the reaction curve at multiple wavelengths Separate biological waste disposal Software operating on Windows platform (XP, Vista, Windows 10) Specialized technical support via the Internet Cooling of standards and controls 10-liter containers for H2O and waste liquids Barcode reader for reagents Barcode reader for samples Sample holder plate for 12-13x75mm tubes Sample holder plate for 16x100mm tubes...

...The FESSMANN TURBOMAT system is the most effective universal solution for heating, drying, defrosting, cooking, roasting, smoking, and cooling a wide range of products automatically. Made entirely of stainless steel, it is vapor-proof. Equipped with a centralized steam cleaning system.

For over 25 years, Tecnocurve has specialized in the cold bending and rolling of tubulars and profiles, whether they are made of steel, stainless steel, or aluminum. Thanks to a precise and tested management system, supported by modern machinery and highly qualified personnel, Tecnocurve can guarantee a very high quality standard for its products. The assistance provided from the initial stages of...

... anti-condensation units. Between the two sections there is a device that makes the belt vibrate to facilitate the relaxation and shrinkage of the fibers. At the output of the last steaming tunnel, an adjustable forced hot air drying group is installed. In the final part of the machine there is a double cooling field blocking the movement of the fibers (thermic shock). Both the drying field and the cooling one are above the conveyor belt in order to avoid a direct contact between the air flows and the right side of the fabric.

...absorption towers, as well as filters for oily mists, electrostatic filters, and coalescing cartridges. Additionally, it provides activated carbon filters, catalytic thermal destructors with heat recovery, exchangers for dirty fluids, ventilation and cooling systems, and optimization of industrial climates, as well as galvanized sheet metal ducting and various types of extractors: for combustion gases...

...Furthermore, to meet the demands of vehicles equipped with electric power systems, Errecinque offers a wide range of piping for battery packs and for all devices that require cooling or heating. Errecinque is currently a market leader in the global design and production of components for the complex SCR system, such as the sender units for DEF (Ad-Blue) and the related connecting pipes to various groups.

... systems for pasta, including Sheeters, Formers, Ravioli Machines, automatic double-sheet ravioli systems, Lasagna Machines, and Noodle Makers, Pasteurizers, cooling tunnels, and continuous Cookers, complete lines for pre-cooked fresh pasta.

INTERTEC provides and applies solar control films that significantly reduce heat in environments, managing to cut cooling system costs by up to 50%. This substantial energy saving ensures the amortization of the film within an average period of a maximum of 3 years; it should also be noted that in some situations and latitudes, air conditioning becomes even unnecessary. An additional advantage of...

... pump and various mounting brackets and accessories. All camera housings are available with IR window (Germanium or Zinc Selenide) for thermal imaging cameras. Tecnovideo offers a full range of protective camera housings with several features for customized requirements like water and air cooling system, air blowing device and shutter.

... lower than the environment; with air, for fluid temperatures exceeding 10°C above the environment; with water, for fluid temperatures exceeding 5°C above the available water. EATA Equipaggiamenti has developed an internal management system in line with the corporate certification that authorizes the management of fluorinated greenhouse gases according to European Regulation CE 303/2008. Certification under Regulation CE 303/2008 is a necessary requirement for installing, maintaining, and repairing equipment and machinery containing such gases.

MGF produces equipment for the thermohydraulic sector such as testing pumps, loading and washing systems for solar plants and heating circuits, instrumentation for gas system testing and smoke analysis, vacuum equipment, charging and diagnostic tools for air conditioners, tube benders, unblocking pumps, descaling pumps, and crimping machines. MGF also manufactures micro-nebulization systems for cooling, dust and odor reduction, humidification, insect removal, and much more.

Siret Impianti has been active since 2003 in the sale of air conditioning, cooling, and refrigeration systems intended for residential and industrial use. Siret Impianti also handles their design, installation, repair, and maintenance.

... comfort. The machines provided come with all the necessary accessories for a quick and non-invasive connection to the system. The variety of equipment available allows for meeting all cooling power and/or installation requirements. The main advantages of renting industrial chillers include: - No capital investment - Cost recovery within the year - No depreciation of the asset - Use only for the...

...and monolithic fiberglass silos. Our range includes over 500 models that adapt to various implementation solutions, all designed and certified for food use. We have developed an innovative and effective flour cooling system that expands the range of solutions offered. Agriflex is also specialized in the production and distribution of cutting-edge fermenters and proofers. All our products are made in compliance with regulations: EUROPEAN (CE certification), ATEX (explosive atmospheres), HACCP.

...HFC125, HFC23), and carbon dioxide (CO2). The extinguishing agents are "clean" gases with no impact on the environment and the protected assets. Each family of gases acts on fire through different extinguishing mechanisms (cooling, smothering, chemical action, etc.) and has a specific field of application.