electric motors Italy

... higher protection ratings. With prior arrangements with our Technical Office, the motor can be customized mechanically and electrically, just like the entire range of MORATTO motors. The achievable powers in the basic configuration of 4 poles, operating in S1, are listed below. Our Test Room is available to evaluate, develop, and test any other power and operating cycle required.

... "Made in Europe" electric motors. 1LE1 - 1LE15 - 1LE5 series electric motors. Electric motors with special coatings. Electric motors with 2 - 4 - 6 - 8 poles. More than 5,000 Siemens electric motors available for immediate delivery.

...Windings for AC electric motors single-phase, two-phase, and three-phase single, double, triple polarity low, medium, and high voltage inclined slots for permanent magnets rewindings in housing windings primarily inserted by hand, especially for special and non-standard motors. electric traction motors in low voltage and non-standard windings mainly of medium and large sizes, up to MEC250.

Damien has been operating since 1993 in the production and sale of electric motors with a philosophy of constant improvement and continuous evolution for the optimization of its products. We are a dynamic company capable of meeting various requests and customizations, ensuring punctuality and speed in delivery times. Drawing on our acquired experience, we present ourselves in the market with high-...

...Tedeschi Gomma produces rubber couplings for transmission joints between electric motors and pumps. It helps to prevent excessive torsional stress during the pump startup and under load conditions.

...•Electric Armchair CE certified •Supports weight up to 150kg •Materials: high-quality, washable anti-bacterial synthetic leather •Remote control •Color: white •EMC Directive EN 60601/1/2:2015 •EU - Medical Device: Registration No. ENC1906175GZ96 EN 60601-11:2006+a11:2011+A1:2013+A12:2014 •Class I Medical Device D.lgs. 24/02/97 n.46 implementing the CEE Directive 93/42 •3 Electric Motors...

...We provide roller test benches and data acquisition and control systems for dedicated vehicle approval test rooms. WLTP cycles or other regulations require systems that meet specific requirements. Custom solutions, roller test benches also available in active versions (equipped with electric motors) for various application areas, from vehicle approval to the reproduction of driving cycles. All...

...Silver powders for the production of diamond wheels, carbon brushes, electric motors...

... motors fixed on the ends of the radial sweeps and controlled by Frequency Drive. maximum dimensions:Width m. 10 (32’10”) – Depth m. 10 (32’10”) - High m 3,5 (11’6”) Maximum capacity:36 passengers (Adults/Children) Maximum passengers/hour:720 passengers/hour (3 min. cycle) Power requirements:23 kW (3 kW Led Lighting - 20 kW Motive Power)...

...Prismatic model “Bongioanni” Model BFB Flywheel diameter 1100 mm Flywheel band 120 mm Complete with: double band saw (2 electric motors of 18.5 kW) with control panel with memory settings from 70 mm to 300 mm. with loader – singulator – unloader – separator New electrical panel, machine and services fully wired. Used and operational machine...

... thanks to the easy glide suction nozzleQuick brush roller and squeegee replacement without toolsThe body frame turns to fold the machine for transport in a vehicleLight weight and low noise level“Electric” version is also available...

... and 60Hz versions. Brake power [kW | HP]:60-81.5 Electric Power [kW]:65.3-88.7 Frequency [Hz]:50 Number of poles:6 RPM:980 Voltage [V]:400 Rated current [A]:115 Solid Handling [mm|in]:90-3.5 Discharge [mm | in ]:250-9.84...

... and numerous issues encountered in the construction sector, they are also widely employed for various occasional services such as channel emptying, flood drainage, irrigation, pool cleaning, and decantation well drainage, etc. Available in monoblock version, bare shaft (to be coupled with electric or thermal motors), flanged, with a gear reducer for coupling to a cardan shaft. Suction and discharge: from 1", 1.5", 2", 2.5", 3", 4", 5", 6" Flow rates: up to 6000 lt/min and heads up to 80 meters Suction and discharge: from 1", 1.5", 2", 2.5", 3", 4", 5", 6"...

... setting for the 2 wires with Joystick Disk bending unit Cutting with Brushless motors Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance Processed wire type:Coil Single strand:1 Ø 6÷14 mm (#4) Double strand:2 Ø 6÷10 mm (#3) Pulling speed:150 m/min (500 ft/min) Bending speed:2345°/sec Average power consumption:4 kWh...

...CME has been building and producing various types of electric motors since 1990, customizable based on the customer's application, such as: three-phase asynchronous electric motors, single-phase, high-efficiency IE2, dual-polarity, motors with inverters, self-braking, complete with Encoder, compact motors, and customer-designed motors. Our goal is to provide valid and durable solutions that meet market needs. CME is located at Via Martiri Di Belfiore, 5 in Cento, province of Ferrara.

Samec is a company based in Albinea that specializes in the design and manufacturing of electric motors, stainless steel pumps, and various components. The company produces various types of products, designed according to standardized sizes or made to customer specifications, which include asynchronous electric motors, two-phase and three-phase, with powers ranging from 0.25 kW to 11 kW, in...

Samec is a company based in Albinea that specializes in the design and manufacturing of electric motors, stainless steel pumps, and various components. The company produces a variety of products, designed according to standardized sizes or made to customer specifications, which include asynchronous electric motors, single-phase and three-phase, with power ratings ranging from 0.25 kW to 11 kW, in...

... assembled in the factory in Campagnola Emilia (Reggio Emilia area), with special attention given to the precision of the mechanical machining. Nicolini & C has extensive experience in the production of special motors according to client specifications. Over 40 years of operation, Nicolini has managed to develop a complete line of electric motors with a wide variety of technical solutions, both electrical and mechanical: special shafts, special flanges and hollow shafts, fine tolerances, special voltages, special protections, good efficiencies, motors with inverters, and more.

... is 10,000,000 pieces. CompoTechco is a brand of Bassi Group International, a leader in the production of magnetic and electromechanical components (collectors for electric motors), and ferrite and neodymium plastomagnets for the industry.

...La Bonato & Veronesi has been present in the market since 1960. Its production focuses on unified electric motors and special electric motors, customized according to the client's design. The company's products are applied in various sectors, from food to industrial chemistry, particularly in pumping systems, industrial machines for bread, pasta, vegetables, and slicers. The quality of the products, determined by decades of experience and specific knowledge in the field, combined with excellent service, allows for the guarantee and satisfaction of the most diverse needs.

Manufacturer of single-phase and three-phase asynchronous electric motors in alternating current. Since 1972, we have been producing custom electric motors tailored to customer needs. We manufacture single-phase motors with customized onboard electrical equipment solutions, including special executions for shafts and flanges designed by the customer. We provide components such as wound stators...

Neri Motori has been producing and designing special asynchronous electric motors since 1946 and today holds a significant role on an international level. The company offers complete and cutting-edge products and solutions and is an Italian excellence that has managed to combine artisanal care with industrial development to meet the needs of its customers. Dynamic and forward-looking, the company...

Bernardi is the leading Italian company in the market for electromechanical and electrotechnical components and spare parts. We sell materials intended for the construction and repair of static and rotating electric machines, bearings, electric motors, fan coil motors, industrial fans, mechanical seals, and frequency converters.

... such as milling, contouring, drilling, edging, joint machining, engraving, and squaring on woodworking machines, as well as for numerous applications on aluminum and plastics. Since the beginning of its activity in the field of high-frequency electric motors, the main goal has been to transform traditional automatic systems for wood and light alloys into a new generation of electric motors. ELTE®...

The workshop, founded in 1935, is a leader in the repair and sale of electric motors, electric pumps, submersible pumps, and tools. It carries out repairs and replacements of mechanical components for both artisanal and industrial use. The workshop mainly focuses on the repair of electric motors, pumps, electric pumps, gear motors, as well as the repair of various types of tools and generators. It is also specialized in the overhaul of direct current motors, the repair of welding machines, alternators, and the electrical components of compressors.

Z.P., active since 1965, operates in the electromechanical sector and is capable of rewinding electric motors of any type and brand, with power up to 100 kW, in all insulation classes. It deals with the sale and repair of electric pumps for irrigation, heating, the food industry, thermal oils, submersible pumps for irrigation, drainage, and sewage. It operates with the latest technologies and cutting-edge instruments to ensure products and services of the highest quality. Availability for goods pickup with our vehicle or contracted courier.

Rollers, either manual or motorized, electric motors, power transmission joints, and measurement and control instrumentation. Sale and distribution of mechanical components for the industry. Specialized in custom mechanical parts based on customer designs, rapid fulfillment of commercial products, and coatings in various types of plastic materials.

At Gem, we produce single-phase and three-phase electric motors, as well as pumps for hot tubs, spa pumps, and upon request, we can manufacture according to customer specifications.

Electric motors, drives, and feedback systems for the industry. We operate in 3 main divisions: distribution of products for industrial automation power, with a significant warehouse of electric motors and digital drives available for immediate delivery; provision of System Integrator services such as installation, programming, and commissioning by qualified technicians; energy products - lithium batteries - DC Electric Motors - Vector AC Electric Motors - Brushless AC Electric Motors - Water-cooled Torque AC Electric Motors - Digital drives and control systems.

SPERONI S.p.A. specializes in the production of electric pumps and electric motors. The company offers a wide range of pumps of all types: volumetric, centrifugal, self-priming, etc.; it has a production capacity of over 4,000 items per day and is present with its brands in over 120 countries worldwide.