surface coating Italy

Colimet S.r.l. leverages the fifty years of European experience of its owner in Anticorrosion. It conducts its business by marketing metallization systems, equipment, products, and non-ferrous metals. It offers technical consulting, promotes technical initiatives, participates in industry fairs, and publishes articles and information to spread knowledge about the anticorrosive properties of Zinc ...

... new industrial floors and concrete screeds, both grey and coloured. The supports must be dry, clean and dust-free. Apply QL Polisil by spray, roller or immersion. Between 0.1 and 0.3 kg of QL Polisil per square metre of surface to be treated. Consumption varies depending on the porosity of the structure.

...The Chemical Nickel deposit has the ability to create extremely uniform technical coatings on geometrically complex parts that cannot be treated with galvanic coatings. Its properties: - Hardness 600-1050 Hv (depending on heat treatment) - High chemical resistance; - High wear resistance. The percentage of phosphorus present affects the surface characteristics: a high content of the element...

...The Membrane Pump utilizes air during the product's discharge, unlike airless pumps... airless pumps... The paint is atomized by the nozzle thanks to multiple holes. The product is atomized through a jet of compressed air, which also serves to transport the particles onto the surface to be treated. The airless pump draws the product through the suction tube; once inside the pump, it is subjected...

Agere Antioxidant resolves the oxidation of jewelry, in stock, in display cases, and during the initial wearing period. Request a FREE SAMPLE. If you buy or produce in Italy, you can request Agere Protection. We are the only antioxidant technology that has passed all the rigorous tests of the most renowned international high jewelry brands. Agere has opened in Arezzo. To date, we work with ove...

...Coating machine for ice cream cones. It is possible to coat the cones in the following options: internally and externally for an adjustable height, only on the outer surface for an adjustable height, completely on the inner surface, completely inside and outside for an adjustable height. In all coating options, it is possible to apply sprinkles on the cone. The maximum production capacity is approximately 4500 pieces/hour. The loading magazine autonomy is about 5 minutes. The tank loading capacity is 150 liters of chocolate. Dimensions: cm. 610 X 330 x H180 Weight: 2200 Kg...

...The SAAST520/1 constant load hardness and scratch test machine allows for the scratch resistance test, one of the most important indicators for assessing the hardness of coatings. The test involves a controlled scratching, performed using a tip on a selected area. A sample is fixed and slowly moved under the tip to scratch the surface of the coating. Depending on the test procedures, constant or...

...Adhesion testers for single and multilayer coatings. These tools verify adhesion through a manual procedure that creates a square grid on the paint or coating layer. This grid is formed by sliding the head twice over the sample surface. The slides must be orthogonal to each other, thus creating a square grid of various sizes, depending on the characteristics of the head used for the test. After creating the grid, the surface is inspected (with the help of a brush and magnifying glass), and the result is compared with regulatory references to determine the degree of adhesion.

...For every project, FIP INDUSTRIALE always supplies the adhesive with the most suitable characteristics to meet site requirements. The broad range of adhesives for gluing gaskets, guidance rods and load spreading pads includes single-component, single-coating adhesives and thixotropic epoxy adhesives serving both as glue and as levelling agent for the groove concrete surface. Gasket gluing tests on concrete.

New Krome srl was established in 2015; the main processing of our company is the galvanic surface treatment of metals. We work with companies in the sectors of furniture, home and office; industrial cleaning equipment; aids for hospitals; aids for the disabled; frames and forks for bicycles; exhausts. Trivalent chrome plating is an electrodeposition process of chrome from a trivalent chrome solution (chrome III).

Torninfer srl is a company based in Barberino Tavarnelle, in the province of Florence, at via Puccini 13. Torninfer srl is a precision mechanical workshop specialized in the production of mechanical components for the mechanical, electromechanical, transport, electronics, and telecommunications industries. Additionally, Torninfer srl deals with components for furniture, lighting, and faucets. The ...

Rinnovation is born from a branch of Inn-ovation srl, which has always been involved in the organization and management of processes related to the automotive world. After working for a long time with prestigious brands such as Mercedes Benz and BMW, it was decided that a sufficient level of know-how had been reached to embark on this new adventure in CAR and YACHT DETAILING. Rinnovation, in fact,...

La Zocca Coatings is a company that has been operating in the surface treatment sector for over 50 years, aiming to enhance the anti-corrosive, wear-resistant, non-stick, and anti-friction characteristics of mechanical components used in various commercial sectors. The company is structured into 3 Divisions: - THERMAL SPRAY using oxyacetylene flame (FS), which deposits many metallic alloys...

Pretreatment and Coating Cataphoresis and Powders...

Powder coating with thermosetting powders...

At Emmeti, we have been operating in the anodic oxidation sector since 1980. We specialize in anodic oxidation and aluminum hardware. Our production includes traditional colors such as silver, bronze, champagne, black, smoked brown, and electrocolor. We are also capable of performing vibratory and tumbling finishing on aluminum and other alloys, both wet and dry. Our strengths are undoubtedly our ...

Heat treatments in the furnace up to 1,200°C for a wide range of steels, with the following processes: Annealing, Normalizing, Tempering, Stress Relief, Hardening, Quenching. Heat treatments of metals on behalf of third parties.

Since 1979, we have been specializing in all galvanic treatments for metals and finishing processes such as polishing, satin finishing, and sandblasting. Valued in the industrial, military, aerospace, naval, and railway sectors, we also offer our services to any private individual looking to restore an item made of silver, bronze, or copper, or to make the chrome on vintage motorcycles and cars sh...

Polishing, electropolishing, pickling, surface treatments of stainless steel...

...60022 CASTELFIDARDO (AN) - v. Jesina, 25/A ZINC COATING - NICKEL PLATING - CHROMATING - BRONZING - COPPER PLATING...

...Since 2001, MO. MASK srl, founded by Alessandro Moglianesi, has been exclusively producing two-tone painting masks for shoe soles made of PU – TR – TPU – PVC – RUBBER – EVA and similar materials. Our masks are constructed, or rather 'dressed', around the sole, using the material most suitable for the customer's needs: resin – aluminum – nickel – iron – copper; we can enhance the finish of our product with Teflon coating (Teflon®), a patented surface treatment that makes our masks 'impervious' to paints. We also specialize in the construction of masks and supports for pad printing.

... light metal carpentry; accessories and small parts of any kind (accessories for gates, fixtures, furniture details, shaped sheet metal, and similar). The main technologies we use for surface treatment: Metal powder coating in copper, brass, bronze, steel, titanium, applicable on any substrate. Priming with rust-resistant primers and enamels, both powder (with zinc primer) and liquid, including inorganic zinc coatings.

... artifacts. Custom processing and modifications. Processing of thermosetting resins: polyesters, vinyl esters, epoxies, food-grade. Surface coating with visible fiber. Refitting of vessels. We collaborate with major design and engineering firms. Certified company UNI EN ISO 9001:2015...

Cebic Urban Design is a leading company in the installation of Stamped Asphalt and Colored Asphalt, as well as the resin coating and painting of bike paths throughout Italy. Since 1994, our mission has been to introduce a model of innovation in public and private infrastructure. Stamped asphalt is a mixture of bitumen and minerals that are laid on the road surface and imprinted into the ground...

Stelma Paint sas specializes in powder and liquid coatings and was established in 2008. We are experts in industrial powder coating with thermosetting powders, as well as thermoplastic coating treatments, which are among the most versatile and durable coatings available on the market today. Epoxy, polyester, and polyurethane coatings. We bring color to your ideas.

Sandblasting for carpentry with automatic tunnel Length 15 m, Width 2.40 m, Height 3.00 m, Weight 120 q Sandblaster: 2x3 m Metal coating Cleaning of load cells for painting systems...

Surface treatments on metals...

Hot-Dip Galvanizing of Steel, Powder Coating...

Sandblasting and anti-corrosion according to national and international standards, metallization, coating: 2 ovens 14x14x5 and 2 ovens 7x14x5, heated BIMIXER pump.